[PATCH v4 1/2] serial: mxc: enable the RX pipeline

[Fabio Estevam]

Hi Johannes,

On 06/09/2022 09:06, Johannes Schneider wrote:

> +
> +	/* setting the baudrate triggers a reset, returning cr3 to its
> +	 * reset value but UCR3_RXDMUXSEL "should always be set."
> +	 * according to the imx8 reference-manual
> +	 */
> +	writel(readl(&base->cr3) | UCR3_RXDMUXSEL, &base->cr3);
> +

Nitpick: the recommended style for multi-line comments is:


/*
  * Setting the baudrate triggers a reset, returning cr3 to its
  * reset value but UCR3_RXDMUXSEL "should always be set."
  * according to the imx8 reference-manual.
  */

Reviewed-by: Fabio Estevam <festevam at denx.de>