[PATCH v1 25/26] imx8mq: synchronise device tree with linux

[Heiko Thiery]

Hi Marcel,

Am Di., 6. Sept. 2022 um 16:05 Uhr schrieb Marcel Ziswiler
<marcel.ziswiler at toradex.com>:
>
> Hi Heiko
>
> On Tue, 2022-09-06 at 14:36 +0200, Heiko Thiery wrote:
> > Hi Marcel and all,
> >
> >
> > Am Do., 21. Juli 2022 um 15:48 Uhr schrieb Marcel Ziswiler
> > <marcel at ziswiler.com>:
> > >
> > > From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > >
> > > Synchronise device tree with linux v5.19-rc5.
> > >
> > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > > ---
> > >
> > >  arch/arm/dts/imx8mq-evk.dts                |  65 ++++++-
> >
> > I just tried the current master on imx8mq-evk and figured out that it
> > doesn't start. I did a git bisect and saw that the dtb sync seems to
> > be responsible for that. Can anyone else confirm that?
>
> Remember, that series went in a little pre-maturely. Meanwhile, I posted
> a resp two refreshs [1] [2]. Would that maybe fix it? Otherwise, I guess
> somebody with that actual hardware would need figuring out what may go
> wrong resp. requires further patching the U-Boot specific device tree.
>

No I was not aware of that .. But meanwhile I figured out that when
removing the node "hdmi_phy_27m" the board starts again.

> [1] https://lore.kernel.org/all/20220826183141.789236-1-marcel@ziswiler.com/
> [2] https://lore.kernel.org/all/20220826094834.693236-1-marcel@ziswiler.com/
>
> [snip]
>
> Cheers
>
> Marcel

-- 
Heiko