[PATCH 2/4] stm32mp: stm32prog: change default flashlayout location to CONFIG_SYS_LOAD_ADDR

[Patrick Delaunay]

Change the defaut flashlayout location, hardcoded at STM32_DDR_BASE,
to CONFIG_SYS_LOAD_ADDR to avoid issue on board with reserved memory
at STM32_DDR_BASE.

This patch changes the command behavior for STM32MP13 and STM32MP15
platform, as CONFIG_SYS_LOAD_ADDR(0xc2000000) != STM32_DDR_BASE
but without impact for serial boot with STM32CubeProgrammer.

Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
---

 arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c    | 2 +-
 arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c        | 8 ++++----
 arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c | 2 +-
 arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c    | 2 +-
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c
index f59414e716f..cb9e20da136 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c
@@ -61,7 +61,7 @@ static int do_stm32prog(struct cmd_tbl *cmdtp, int flag, int argc,
 
 	dev = (int)dectoul(argv[2], NULL);
 
-	addr = STM32_DDR_BASE;
+	addr = CONFIG_SYS_LOAD_ADDR;
 	size = 0;
 	if (argc > 3) {
 		addr = hextoul(argv[3], NULL);
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
index 65e32288af7..3b2652a0e0d 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
@@ -1388,7 +1388,7 @@ static int dfu_init_entities(struct stm32prog_data *data)
 		char buf[ALT_BUF_LEN];
 
 		sprintf(buf, "@FlashLayout/0x%02x/1*256Ke ram %x 40000",
-			PHASE_FLASHLAYOUT, STM32_DDR_BASE);
+			PHASE_FLASHLAYOUT, CONFIG_SYS_LOAD_ADDR);
 		ret = dfu_alt_add(dfu, "ram", NULL, buf);
 		log_debug("dfu_alt_add(ram, NULL,%s) result %d\n", buf, ret);
 	}
@@ -1699,15 +1699,15 @@ static void stm32prog_end_phase(struct stm32prog_data *data, u64 offset)
 {
 	if (data->phase == PHASE_FLASHLAYOUT) {
 #if defined(CONFIG_LEGACY_IMAGE_FORMAT)
-		if (genimg_get_format((void *)STM32_DDR_BASE) == IMAGE_FORMAT_LEGACY) {
-			data->script = STM32_DDR_BASE;
+		if (genimg_get_format((void *)CONFIG_SYS_LOAD_ADDR) == IMAGE_FORMAT_LEGACY) {
+			data->script = CONFIG_SYS_LOAD_ADDR;
 			data->phase = PHASE_END;
 			log_notice("U-Boot script received\n");
 			return;
 		}
 #endif
 		log_notice("\nFlashLayout received, size = %lld\n", offset);
-		if (parse_flash_layout(data, STM32_DDR_BASE, offset))
+		if (parse_flash_layout(data, CONFIG_SYS_LOAD_ADDR, offset))
 			stm32prog_err("Layout: invalid FlashLayout");
 		return;
 	}
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c
index 2932eae7578..1bf5f5ae0ac 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c
@@ -462,7 +462,7 @@ static void get_phase_command(struct stm32prog_data *data)
 		length = strlen(err_msg);
 	}
 	if (phase == PHASE_FLASHLAYOUT)
-		destination = STM32_DDR_BASE;
+		destination = CONFIG_SYS_LOAD_ADDR;
 
 	stm32prog_serial_putc(length + 5);           /* Total length */
 	stm32prog_serial_putc(phase & 0xFF);         /* partition ID */
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c
index a8b57c4d8f0..bcb4d373f69 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c
@@ -90,7 +90,7 @@ static int stm32prog_cmd_read(u64 offset, void *buf, long *len)
 	}
 	phase = stm32prog_data->phase;
 	if (phase == PHASE_FLASHLAYOUT)
-		destination = STM32_DDR_BASE;
+		destination = CONFIG_SYS_LOAD_ADDR;
 	dfu_offset = stm32prog_data->offset;
 
 	/* mandatory header, size = PHASE_MIN_SIZE */
-- 
2.25.1