[PATCH] board: gateworks: venice: update GW74xx PMIC config
Tim Harvey
tharvey at gateworks.com
Thu Sep 8 22:40:36 CEST 2022
Update the GW74xx PMIC configuration.
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
board/gateworks/venice/spl.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/board/gateworks/venice/spl.c b/board/gateworks/venice/spl.c
index 56a985ed668f..eadb58f9ac75 100644
--- a/board/gateworks/venice/spl.c
+++ b/board/gateworks/venice/spl.c
@@ -153,20 +153,18 @@ static int power_init_board(void)
/* BUCKxOUT_DVS0/1 control BUCK123 output */
dm_i2c_reg_write(dev, PCA9450_BUCK123_DVS, 0x29);
- /* Buck 1 DVS control through PMIC_STBY_REQ */
- dm_i2c_reg_write(dev, PCA9450_BUCK1CTRL, 0x59);
-
- /* Set DVS1 to 0.8v for suspend */
- dm_i2c_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x10);
+ /* increase VDD_SOC to 0.95V before first DRAM access */
+ dm_i2c_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x1C);
- /* increase VDD_DRAM to 0.95v for 3Ghz DDR */
- dm_i2c_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x1C);
+ /* Set DVS1 to 0.85v for suspend */
+ dm_i2c_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x14);
- /* VDD_DRAM off in suspend: B1_ENMODE=10 */
- dm_i2c_reg_write(dev, PCA9450_BUCK3CTRL, 0x4a);
+ /* Enable DVS control through PMIC_STBY_REQ */
+ dm_i2c_reg_write(dev, PCA9450_BUCK1CTRL, 0x59);
- /* set VDD_SNVS_0V8 from default 0.85V */
- dm_i2c_reg_write(dev, PCA9450_LDO2CTRL, 0xC0);
+ /* Kernel uses OD/OD freq for SOC */
+ /* To avoid timing risk from SOC to ARM, increase VDD_ARM to OD voltage 0.95v */
+ dm_i2c_reg_write(dev, PCA9450_BUCK2OUT_DVS0, 0x1C);
/* set WDOG_B_CFG to cold reset */
dm_i2c_reg_write(dev, PCA9450_RESET_CTRL, 0xA1);
--
2.25.1
More information about the U-Boot
mailing list