imx8mq allocation issue

Heiko Thiery heiko.thiery at gmail.com
Fri Sep 9 11:12:01 CEST 2022


HI,

I think on the imx8mq platform we have a problem with the introduction
of the clock driver. I tried to debug the problem that the pitx-imx8m
board was not able to start for some time. I was wondering why the
pitx-im8m doesn't work anymore although the imx8mq_evk is running.

So I switched to the imx8mq_evk for counter testing. As I already
figured out in [1] also the imx8mq_evk is not able to start properly.

On the EVK I enabled the DEBUG_UART and see the outputs below. I
suspect all imx8mq boards have this problem.

CONFIG_DEBUG_UART_BASE=0x30860000      # for uart1
CONFIG_DEBUG_UART_CLOCK=24000000

--- 8< ----
U-Boot SPL 2022.10-rc4-00038-ge3fce5e560-dirty (Sep 09 2022 - 10:51:29 +0200)
PMIC:  PFUZE100 ID=0x10
SEC0:  RNG instantiated
Normal Boot
Trying to boot from MMC2
clk_register: failed to get <NULL> device (parent of ckil)
clk_register: failed to get <NULL> device (parent of clock-osc-27m)
alloc space exhausted
alloc space exhausted
alloc space exhausted
alloc space exhausted
:
:
alloc space exhausted
alloc space exhausted
alloc space exhausted
alloc space exhausted
alloc space exhausted
alloc space exhausted
alloc space exhausted
alloc space exhaustedÿ

U-Boot 2022.10-rc4-00038-ge3fce5e560-dirty (Sep 09 2022 - 10:51:29 +0200)

CPU:   Freescale i.MX8MQ rev2.1 at 1000 MHz
Reset cause: POR
Model: NXP i.MX8MQ EVK
DRAM:  3 GiB
clk_register: failed to get <NULL> device (parent of ckil)
clk_register: failed to get <NULL> device (parent of clock-osc-27m)
clk_register: failed to get <NULL> device (parent of sys1_pll)
clk_register: failed to get <NULL> device (parent of sys2_pll)
clk_register: failed to get <NULL> device (parent of sys3_pll)
Core:  147 devices, 21 uclasses, devicetree: separate
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In:    serial at 30860000
Out:   serial at 30860000
Err:   serial at 30860000
SEC0:  RNG instantiated
Net:   eth0: ethernet at 30be0000
Hit any key to stop autoboot:  0
u-boot=>
--- 8< ----

Could the maintainers of the other imx8mq boards please check if they
can confirm this?

[1] https://lore.kernel.org/u-boot/CAEyMn7bCaC8Y8B0mOAi72yJTHMKDJt_oe_eBznrwHh4JxXodZw@mail.gmail.com/#t

Thanks,
Heiko


More information about the U-Boot mailing list