[PATCH 0/7] arm: dts: Create common imx8mn-u-boot

[Adam Ford]

On Mon, Aug 15, 2022 at 6:43 AM Adam Ford <aford173 at gmail.com> wrote:
>
> On Sun, Aug 14, 2022 at 5:57 PM Fabio Estevam <festevam at gmail.com> wrote:
> >
> > Hi Adam,
> >
> > On Sun, Jul 31, 2022 at 8:46 PM Adam Ford <aford173 at gmail.com> wrote:
> > >
> > > Every imx8mn board has a bunch of similar entries on their
> > > respective board-u-boot.dtsi file to make the board bootable.
> > > Instead of maintaining multiple files with duplicate code,
> > > have them all point to a new, common file.  This file includes
> > > the necessary nodes that were common to nearly all boards
> > > and added spba1 to help faciliate SPL_DM_SERIAL.  This also
> > > adds support for CONFIG_FSPI_CONF_HEADER which can be used
> > > to generate flash.bin files for booting from FlexSPI.
> > >
> > > Adam Ford (7):
> > >   arm: dts: imx8mn-u-boot: Create common imx8mn-u-boot.dtsi
> > >   arm: dts: imx8mn-beacon-kit: Consolidate with imx8mn-u-boot
> > >   arm: dts: imx8mn-bsh-smm-s2: Consolidate with imx8mn-u-boot
> > >   arm: dts: imx8mn-ddr4-evk: Consolidate with imx8mn-u-boot
> > >   arm: dts: imx8mn-evk: Consolidate with imx8mn-u-boot
> > >   arm: dts: imx8mn-var-som-symphony: Consolidate with imx8mn-u-boot
> > >   arm: dts: imx8mn-venice: Consolidate with imx8mn-u-boot
> >
> > For the series:
> >
> > Reviewed-by: Fabio Estevam <festevam at denx.de>
>

Stefano,

It's been over a month, and I haven't heard any feedback from you and
it doesn't appear this series has been accepted.  Without it, Nano
boards with DM_SERIAL in SPL won't' boot because of the device tree
change which moved the UART's into a subnode.  Are you able to apply
to this series?  As I mentioned before, I can squash the dependent
patch into this series and push a V2 if you want.  With a pending
release in a few weeks, it would be nice to have the Nano boards
booting again.

thanks!

adam

> Thanks!
>
> Stefano,
>
> If you want me to squash the 1 dependent patch, I can squash it into
> this series and submit a V2, but getting this series applied should
> fix a bunch of boards which don't boot properly.
>
> adam