[PATCH v10 11/15] FWU: cmd: Add a command to read FWU metadata

Sughosh Ganu sughosh.ganu at linaro.org
Thu Sep 15 10:14:47 CEST 2022


Add a command to read the metadata as specified in the FWU
specification and print the fields of the metadata.

Signed-off-by: Sughosh Ganu <sughosh.ganu at linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas at linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere at linaro.org>
---
Changes since V9:
* Add a document for the command

 cmd/Kconfig                 |  6 +++
 cmd/Makefile                |  1 +
 cmd/fwu_mdata.c             | 79 +++++++++++++++++++++++++++++++++++++
 doc/usage/cmd/fwu_mdata.rst | 43 ++++++++++++++++++++
 doc/usage/index.rst         |  1 +
 5 files changed, 130 insertions(+)
 create mode 100644 cmd/fwu_mdata.c
 create mode 100644 doc/usage/cmd/fwu_mdata.rst

diff --git a/cmd/Kconfig b/cmd/Kconfig
index 0e0be94f41..af070b5459 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -161,6 +161,12 @@ config CMD_CPU
 	  internal name) and clock frequency. Other information may be
 	  available depending on the CPU driver.
 
+config CMD_FWU_METADATA
+	bool "fwu metadata read"
+	depends on FWU_MULTI_BANK_UPDATE
+	help
+	  Command to read the metadata and dump it's contents
+
 config CMD_LICENSE
 	bool "license"
 	select BUILD_BIN2C
diff --git a/cmd/Makefile b/cmd/Makefile
index 6e87522b62..ff6e160f4a 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_CMD_FPGA) += fpga.o
 obj-$(CONFIG_CMD_FPGAD) += fpgad.o
 obj-$(CONFIG_CMD_FS_GENERIC) += fs.o
 obj-$(CONFIG_CMD_FUSE) += fuse.o
+obj-$(CONFIG_CMD_FWU_METADATA) += fwu_mdata.o
 obj-$(CONFIG_CMD_GETTIME) += gettime.o
 obj-$(CONFIG_CMD_GPIO) += gpio.o
 obj-$(CONFIG_CMD_HVC) += smccc.o
diff --git a/cmd/fwu_mdata.c b/cmd/fwu_mdata.c
new file mode 100644
index 0000000000..725b4c17d3
--- /dev/null
+++ b/cmd/fwu_mdata.c
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <command.h>
+#include <dm.h>
+#include <fwu.h>
+#include <fwu_mdata.h>
+#include <log.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include <linux/types.h>
+
+static void print_mdata(struct fwu_mdata *mdata)
+{
+	int i, j;
+	struct fwu_image_entry *img_entry;
+	struct fwu_image_bank_info *img_info;
+
+	printf("\tFWU Metadata\n");
+	printf("crc32: %#x\n", mdata->crc32);
+	printf("version: %#x\n", mdata->version);
+	printf("active_index: %#x\n", mdata->active_index);
+	printf("previous_active_index: %#x\n", mdata->previous_active_index);
+
+	printf("\tImage Info\n");
+	for (i = 0; i < CONFIG_FWU_NUM_IMAGES_PER_BANK; i++) {
+		img_entry = &mdata->img_entry[i];
+		printf("\nImage Type Guid: %pUL\n",
+		       &img_entry->image_type_uuid);
+		printf("Location Guid: %pUL\n", &img_entry->location_uuid);
+		for (j = 0; j < CONFIG_FWU_NUM_BANKS; j++) {
+			img_info = &img_entry->img_bank_info[j];
+			printf("Image Guid:  %pUL\n", &img_info->image_uuid);
+			printf("Image Acceptance: %s\n",
+			       img_info->accepted == 0x1 ? "yes" : "no");
+		}
+	}
+}
+
+int do_fwu_mdata_read(struct cmd_tbl *cmdtp, int flag,
+		     int argc, char * const argv[])
+{
+	struct udevice *dev;
+	int ret = CMD_RET_SUCCESS, res;
+	struct fwu_mdata mdata = { 0 };
+
+	if (uclass_get_device(UCLASS_FWU_MDATA, 0, &dev) || !dev) {
+		log_err("Unable to get FWU metadata device\n");
+		return CMD_RET_FAILURE;
+	}
+
+	res = fwu_mdata_check(dev);
+	if (res < 0) {
+		log_err("FWU Metadata check failed\n");
+		ret = CMD_RET_FAILURE;
+		goto out;
+	}
+
+	res = fwu_get_mdata(dev, &mdata);
+	if (res < 0) {
+		log_err("Unable to get valid FWU metadata\n");
+		ret = CMD_RET_FAILURE;
+		goto out;
+	}
+
+	print_mdata(&mdata);
+
+out:
+	return ret;
+}
+
+U_BOOT_CMD(
+	fwu_mdata_read,	1,	1,	do_fwu_mdata_read,
+	"Read and print FWU metadata",
+	""
+);
diff --git a/doc/usage/cmd/fwu_mdata.rst b/doc/usage/cmd/fwu_mdata.rst
new file mode 100644
index 0000000000..ea3c22724a
--- /dev/null
+++ b/doc/usage/cmd/fwu_mdata.rst
@@ -0,0 +1,43 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+fwu_mdata_read command
+======================
+
+Synopsis
+--------
+
+::
+
+    fwu_mdata_read
+
+Description
+-----------
+
+The fwu_mdata_read command is used to read the FWU metadata
+structure. The command prints out information about the current active
+bank, the previous active bank, image GUIDs, image acceptance etc.
+
+The output may look like:
+
+::
+
+    => fwu_mdata_read
+            FWU Metadata
+    crc32: 0xec4fb997
+    version: 0x1
+    active_index: 0x0
+    previous_active_index: 0x1
+            Image Info
+
+    Image Type Guid: 19D5DF83-11B0-457B-BE2C-7559C13142A5
+    Location Guid: 49272BEB-8DD8-46DF-8D75-356C65EFF417
+    Image Guid:  D57428CC-BB9A-42E0-AA36-3F5A132059C7
+    Image Acceptance: yes
+    Image Guid:  2BE37D6D-8281-4938-BD7B-9A5BBF80869F
+    Image Acceptance: yes
+
+Configuration
+-------------
+
+To use the fwu_mdata_read command, CONFIG_CMD_FWU_METADATA needs to be
+enabled.
diff --git a/doc/usage/index.rst b/doc/usage/index.rst
index f1beeec59c..5b21451f6a 100644
--- a/doc/usage/index.rst
+++ b/doc/usage/index.rst
@@ -45,6 +45,7 @@ Shell commands
    cmd/fatload
    cmd/fdt
    cmd/for
+   cmd/fwu_mdata
    cmd/gpio
    cmd/load
    cmd/loadm
-- 
2.34.1



More information about the U-Boot mailing list