[PATCH v4 1/4] i2c: stm32: fix comment and remove unused AUTOEND bit

Patrick DELAUNAY patrick.delaunay at foss.st.com
Thu Sep 15 17:18:53 CEST 2022


Hi Alain,

On 9/12/22 10:41, Alain Volmat wrote:
> Comment within stm32_i2c_message_start is misleading, indicating
> that AUTOEND bit is setted while it is actually cleared.
> Moreover, the bit is actually never setted so there is no need
> to clear it hence get rid of this bit clear and the bit macro
> as well.
>
> Signed-off-by: Alain Volmat <alain.volmat at foss.st.com>
> Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
>   drivers/i2c/stm32f7_i2c.c | 6 ++----
>   1 file changed, 2 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c
> index bf2a6c9b4b..78d7156492 100644
> --- a/drivers/i2c/stm32f7_i2c.c
> +++ b/drivers/i2c/stm32f7_i2c.c
> @@ -57,7 +57,6 @@ struct stm32_i2c_regs {
>   #define STM32_I2C_CR1_PE			BIT(0)
>   
>   /* STM32 I2C control 2 */
> -#define STM32_I2C_CR2_AUTOEND			BIT(25)
>   #define STM32_I2C_CR2_RELOAD			BIT(24)
>   #define STM32_I2C_CR2_NBYTES_MASK		GENMASK(23, 16)
>   #define STM32_I2C_CR2_NBYTES(n)			((n & 0xff) << 16)
> @@ -304,9 +303,8 @@ static void stm32_i2c_message_start(struct stm32_i2c_priv *i2c_priv,
>   		cr2 |= STM32_I2C_CR2_SADD7(msg->addr);
>   	}
>   
> -	/* Set nb bytes to transfer and reload or autoend bits */
> -	cr2 &= ~(STM32_I2C_CR2_NBYTES_MASK | STM32_I2C_CR2_RELOAD |
> -		 STM32_I2C_CR2_AUTOEND);
> +	/* Set nb bytes to transfer and reload (if needed) */
> +	cr2 &= ~(STM32_I2C_CR2_NBYTES_MASK | STM32_I2C_CR2_RELOAD);
>   	if (msg->len > STM32_I2C_MAX_LEN) {
>   		cr2 |= STM32_I2C_CR2_NBYTES(STM32_I2C_MAX_LEN);
>   		cr2 |= STM32_I2C_CR2_RELOAD;


Applied to u-boot-stm/master, thanks!

I also add the missing Reviewed-by when I get the patch from patchwork

http://patchwork.ozlabs.org/project/uboot/patch/20220912084201.1826979-2-alain.volmat@foss.st.com/

+    Reviewed-by: Heiko Schocher <hs at denx.de>
+    Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>


Regards
Patrick




More information about the U-Boot mailing list