[PATCH 2/9] spi: cadence_qspi: Add support for Versal NET platform

[Michal Simek]

Trivial changes to support cadence ospi driver for Versal NET platform.
Also avoid ospi flash reset for now.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 arch/arm/mach-versal-net/include/mach/hardware.h | 4 ++++
 drivers/spi/Kconfig                              | 2 +-
 drivers/spi/cadence_ospi_versal.c                | 3 ++-
 3 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-versal-net/include/mach/hardware.h b/arch/arm/mach-versal-net/include/mach/hardware.h
index 2eb549849825..808ce48fd148 100644
--- a/arch/arm/mach-versal-net/include/mach/hardware.h
+++ b/arch/arm/mach-versal-net/include/mach/hardware.h
@@ -25,3 +25,7 @@ enum versal_net_platform {
 	VERSAL_NET_EMU = 2,
 	VERSAL_NET_QEMU = 3,
 };
+
+#define VERSAL_SLCR_BASEADDR	0xF1060000
+#define VERSAL_AXI_MUX_SEL	(VERSAL_SLCR_BASEADDR + 0x504)
+#define VERSAL_OSPI_LINEAR_MODE	BIT(1)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index ac91d8225821..240ff212a39f 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -148,7 +148,7 @@ config CQSPI_REF_CLK
 
 config CADENCE_OSPI_VERSAL
 	bool "Configure Versal OSPI"
-	depends on ARCH_VERSAL && CADENCE_QSPI
+	depends on (ARCH_VERSAL || ARCH_VERSAL_NET) && CADENCE_QSPI
 	imply DM_GPIO
 	help
 	  This option is used to enable Versal OSPI DMA operations which
diff --git a/drivers/spi/cadence_ospi_versal.c b/drivers/spi/cadence_ospi_versal.c
index a25c50bc5081..a9547a820031 100644
--- a/drivers/spi/cadence_ospi_versal.c
+++ b/drivers/spi/cadence_ospi_versal.c
@@ -130,6 +130,7 @@ int cadence_qspi_apb_wait_for_dma_cmplt(struct cadence_spi_priv *priv)
 #if defined(CONFIG_DM_GPIO)
 int cadence_qspi_versal_flash_reset(struct udevice *dev)
 {
+#ifndef CONFIG_ARCH_VERSAL_NET
 	struct gpio_desc gpio;
 	u32 reset_gpio;
 	int ret;
@@ -165,7 +166,7 @@ int cadence_qspi_versal_flash_reset(struct udevice *dev)
 	/* Set value 1 to pin */
 	dm_gpio_set_value(&gpio, 1);
 	udelay(1);
-
+#endif
 	return 0;
 }
 #else
-- 
2.36.1