[PATCH 8/9] arm64: versal-net: Add defconfig for Versal NET

[Michal Simek]

Use one defconfig for supporting multiple different platforms. DTB
reselection is enabled to choose DT based on SOC detection.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 configs/xilinx_versal_net_virt_defconfig | 118 +++++++++++++++++++++++
 1 file changed, 118 insertions(+)
 create mode 100644 configs/xilinx_versal_net_virt_defconfig

diff --git a/configs/xilinx_versal_net_virt_defconfig b/configs/xilinx_versal_net_virt_defconfig
new file mode 100644
index 000000000000..b918b2f128b0
--- /dev/null
+++ b/configs/xilinx_versal_net_virt_defconfig
@@ -0,0 +1,118 @@
+CONFIG_ARM=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_SYS_INIT_SP_BSS_OFFSET=1572864
+CONFIG_ARCH_VERSAL_NET=y
+CONFIG_SYS_TEXT_BASE=0x8000000
+CONFIG_SYS_MALLOC_F_LEN=0x100000
+CONFIG_DEFAULT_DEVICE_TREE="xilinx-versal-net-virt"
+CONFIG_SYS_PROMPT="Versal NET> "
+CONFIG_CMD_FRU=y
+CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_SYS_MEMTEST_START=0x00000000
+CONFIG_SYS_MEMTEST_END=0x00001000
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_BOOTDELAY=5
+CONFIG_USE_PREBOOT=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EFIDEBUG=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_UBI=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_BOARD=y
+CONFIG_DTB_RESELECT=y
+CONFIG_MULTI_DTB_FIT=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
+CONFIG_IP_DEFRAG=y
+CONFIG_TFTP_BLOCKSIZE=4096
+CONFIG_CLK_VERSAL=y
+CONFIG_DFU_RAM=y
+CONFIG_ZYNQ_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CADENCE=y
+CONFIG_DM_MAILBOX=y
+CONFIG_ZYNQMP_IPI=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x0
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_ZYNQ_SDHCI_MIN_FREQ=100000
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_ISSI=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY_MARVELL=y
+CONFIG_PHY_NATSEMI=y
+CONFIG_PHY_REALTEK=y
+CONFIG_PHY_TI_DP83867=y
+CONFIG_PHY_VITESSE=y
+CONFIG_PHY_FIXED=y
+CONFIG_PHY_GIGE=y
+CONFIG_XILINX_AXIEMAC=y
+CONFIG_ZYNQ_GEM=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_ZYNQMP_POWER_DOMAIN=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_ZYNQMP=y
+CONFIG_ARM_DCC=y
+CONFIG_PL01X_SERIAL=y
+CONFIG_XILINX_UARTLITE=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_CADENCE_OSPI_VERSAL=y
+CONFIG_ZYNQ_SPI=y
+CONFIG_ZYNQMP_GQSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
+CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_THOR=y
+CONFIG_OF_LIBFDT_OVERLAY=y
-- 
2.36.1