[PATCH v3 4/5] drivers: power: pmic: Enable use of rn5t567 PMIC in SPL

[Martyn Welch]

The support added later in this series tweaks the PMIC voltages in the
SPL. Enable support for the rn5t567 in SPL builds to allow this to be done
cleanly.

Signed-off-by: Martyn Welch <martyn.welch at collabora.co.uk>
---

Changes in v3:
 - New patch (replaces addition of legacy support for rn5t567)

 drivers/power/pmic/Kconfig  | 8 ++++++++
 drivers/power/pmic/Makefile | 2 +-
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index 66b16b06e0..8e10ecae2e 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -300,6 +300,14 @@ config PMIC_RN5T567
 	regulators Real-Time Clock and 4 GPIOs. This driver provides
 	register access only.
 
+config SPL_PMIC_RN5T567
+	bool "Enable driver for Ricoh RN5T567 PMIC in SPL"
+	depends on SPL_DM_PMIC
+	---help---
+	The RN5T567 is a PMIC with 4 step-down DC/DC converters, 5 LDO
+	regulators Real-Time Clock and 4 GPIOs. This driver provides
+	register access only.
+
 config PMIC_TPS65090
 	bool "Enable driver for Texas Instruments TPS65090 PMIC"
 	---help---
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index f73b326255..ae34e6b33e 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_$(SPL_)PMIC_AXP) += axp.o
 obj-$(CONFIG_PMIC_MAX8997) += max8997.o
 obj-$(CONFIG_PMIC_PM8916) += pm8916.o
 obj-$(CONFIG_$(SPL_TPL_)PMIC_RK8XX) += rk8xx.o
-obj-$(CONFIG_PMIC_RN5T567) += rn5t567.o
+obj-$(CONFIG_$(SPL_)PMIC_RN5T567) += rn5t567.o
 obj-$(CONFIG_PMIC_TPS65090) += tps65090.o
 obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o
 obj-$(CONFIG_DM_PMIC_TPS65910) += pmic_tps65910_dm.o
-- 
2.35.1