[PATCH] phy: add of_set_phy_supported() helper, call from phy_config()

Ramon Fried rfried.dev at gmail.com
Sun Sep 18 08:13:14 CEST 2022


On Tue, Aug 9, 2022 at 2:53 PM Rasmus Villemoes
<rasmus.villemoes at prevas.dk> wrote:
>
> Currently, U-Boot doesn't parse a "max-speed" DT property in a phy's
> DT node. That property is a standard binding which should be honoured,
> and in linux that is done by the core phy code via a call to an
> of_set_phy_supported() helper. (Some ethernet drivers support a
> max-speed property in their DT node, but that's orthogonal to what the
> phy supports.)
>
> Add a similar helper in U-Boot, and call it from phy_config().
>
> Signed-off-by: Rasmus Villemoes <rasmus.villemoes at prevas.dk>
> ---
> Resending, this time including the u-boot list in recipients. Sorry
> for the duplicate.
>
>  drivers/net/phy/phy.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index e6e1755518..ec690361e6 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -599,6 +599,20 @@ int phy_register(struct phy_driver *drv)
>         return 0;
>  }
>
> +static int of_set_phy_supported(struct phy_device *phydev)
> +{
> +       ofnode node = phy_get_ofnode(phydev);
> +       u32 max_speed;
> +
> +       if (!ofnode_valid(node))
> +               return 0;
> +
> +       if (!ofnode_read_u32(node, "max-speed", &max_speed))
> +               return phy_set_supported(phydev, max_speed);
> +
> +       return 0;
> +}
> +
>  int phy_set_supported(struct phy_device *phydev, u32 max_speed)
>  {
>         /* The default values for phydev->supported are provided by the PHY
> @@ -1070,6 +1084,12 @@ __weak int board_phy_config(struct phy_device *phydev)
>
>  int phy_config(struct phy_device *phydev)
>  {
> +       int ret;
> +
> +       ret = of_set_phy_supported(phydev);
> +       if (ret)
> +               return ret;
> +
>         /* Invoke an optional board-specific helper */
>         return board_phy_config(phydev);
>  }
> --
> 2.31.1
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>


More information about the U-Boot mailing list