[PATCH] ARM: imx: Update DDR frequency on i.MX8M Plus DHCOM

[sbabic at denx.de]

> Commit 99c7cc58e12 ("ddr: imx: Add i.MX9 DDR controller driver")
> contains an inobvious side-effect which renders all systems using
> DRAM controller at 3732 MT/s unbootable. The change is located in
> ddrphy_init_set_dfi_clk(), where the switch case statement entry
> 3732 changed to entry 3733, so any board with DDR calibration data
> for 3732 MT/s operations needs to be updated to 3733 MT/s to match
> the change.
> Since there is currently only one such board, update the board instead
> of handling both 3732 and 3733 options in the driver. It is likely the
> NXP MX8MP RPA update will follow and use the later value too.
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Fabio Estevam <festevam at denx.de>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Ye Li <ye.li at nxp.com>
> Cc: uboot-imx <uboot-imx at nxp.com>
> Reviewed-by: Fabio Estevam <festevam at denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================