[PATCH v2 8/9] arm64: versal-net: Add defconfig for Versal NET

Mon Sep 19 14:21:09 CEST 2022

Use one defconfig for supporting multiple different platforms. DTB
reselection is enabled to choose DT based on SOC detection.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

Changes in v2:
- Move symbols from .h to defconfig, enable i2c mux, dm_eth_phy, squashfs
  and grepenv

 configs/xilinx_versal_net_virt_defconfig | 131 +++++++++++++++++++++++
 include/configs/xilinx_versal_net.h      |  28 +----
 2 files changed, 134 insertions(+), 25 deletions(-)
 create mode 100644 configs/xilinx_versal_net_virt_defconfig

diff --git a/configs/xilinx_versal_net_virt_defconfig b/configs/xilinx_versal_net_virt_defconfig
new file mode 100644
index 000000000000..4a9910b7c4fa
--- /dev/null
+++ b/configs/xilinx_versal_net_virt_defconfig
@@ -0,0 +1,131 @@
+CONFIG_ARM=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_SYS_INIT_SP_BSS_OFFSET=1572864
+CONFIG_ARCH_VERSAL_NET=y
+CONFIG_SYS_TEXT_BASE=0x8000000
+CONFIG_SYS_MALLOC_F_LEN=0x100000
+CONFIG_DEFAULT_DEVICE_TREE="xilinx-versal-net-virt"
+CONFIG_SYS_PROMPT="Versal NET> "
+CONFIG_CMD_FRU=y
+CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_SYS_MEMTEST_START=0x00000000
+CONFIG_SYS_MEMTEST_END=0x00001000
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_BOOTDELAY=5
+CONFIG_USE_PREBOOT=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_CLOCKS=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=2073
+CONFIG_SYS_BOOTM_LEN=0x6400000
+CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_USB=y
+CONFIG_BOOTP_MAY_FAIL=y
+CONFIG_BOOTP_BOOTFILESIZE=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EFIDEBUG=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_SQUASHFS=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_UBI=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_BOARD=y
+CONFIG_DTB_RESELECT=y
+CONFIG_MULTI_DTB_FIT=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
+CONFIG_IP_DEFRAG=y
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
+CONFIG_TFTP_BLOCKSIZE=4096
+CONFIG_CLK_VERSAL=y
+CONFIG_DFU_RAM=y
+CONFIG_ZYNQ_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CADENCE=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_DM_MAILBOX=y
+CONFIG_ZYNQMP_IPI=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x0
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_ZYNQ_SDHCI_MIN_FREQ=100000
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_ISSI=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY_MARVELL=y
+CONFIG_PHY_NATSEMI=y
+CONFIG_PHY_REALTEK=y
+CONFIG_PHY_TI_DP83867=y
+CONFIG_PHY_VITESSE=y
+CONFIG_PHY_FIXED=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_PHY_GIGE=y
+CONFIG_XILINX_AXIEMAC=y
+CONFIG_ZYNQ_GEM=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_ZYNQMP_POWER_DOMAIN=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_ZYNQMP=y
+CONFIG_ARM_DCC=y
+CONFIG_PL01X_SERIAL=y
+CONFIG_XILINX_UARTLITE=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_CADENCE_OSPI_VERSAL=y
+CONFIG_ZYNQ_SPI=y
+CONFIG_ZYNQMP_GQSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
+CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_THOR=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/include/configs/xilinx_versal_net.h b/include/configs/xilinx_versal_net.h
index d9286e7f5017..0ccd38b7e692 100644
--- a/include/configs/xilinx_versal_net.h
+++ b/include/configs/xilinx_versal_net.h
@@ -12,8 +12,6 @@
 #ifndef __XILINX_VERSAL_NET_H
 #define __XILINX_VERSAL_NET_H
 
-#define CONFIG_REMAKE_ELF
-
 /* FIXME this is causing issue at least on IPP */
 /* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
 
@@ -21,26 +19,10 @@
 #define GICD_BASE	0xF9000000
 #define GICR_BASE	0xF9060000
 
-#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
-
 /* Serial setup */
-#define CONFIG_CPU_ARMV8
-
 #define CONFIG_SYS_BAUDRATE_TABLE \
 	{ 4800, 9600, 19200, 38400, 57600, 115200 }
 
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_MAY_FAIL
-
-/* Monitor Command Prompt */
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE		2048
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_MAXARGS		64
-
 #if defined(CONFIG_CMD_DFU)
 #define DFU_DEFAULT_POLL_TIMEOUT	300
 #define CONFIG_THOR_RESET_OFF
@@ -62,21 +44,17 @@
 
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM)
-# define CONFIG_NET_MULTI
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define PHY_ANEG_TIMEOUT       20000
+# define PHY_ANEG_TIMEOUT	20000
 #endif
 
-#define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
-
-#define CONFIG_CLOCKS
-
 #define ENV_MEM_LAYOUT_SETTINGS \
 	"fdt_addr_r=0x40000000\0" \
 	"fdt_size_r=0x400000\0" \
 	"pxefile_addr_r=0x10000000\0" \
 	"kernel_addr_r=0x18000000\0" \
 	"kernel_size_r=0x10000000\0" \
+	"kernel_comp_addr_r=0x30000000\0" \
+	"kernel_comp_size=0x3C00000\0" \
 	"scriptaddr=0x20000000\0" \
 	"ramdisk_addr_r=0x02100000\0" \
 	"script_size_f=0x80000\0"
-- 
2.36.1

