[PATCH v3 0/8] Enable CONFIG_TIMER for all Kirkwood / MVEBU boards

[Stefan Roese]

On 15.09.22 16:20, Stefan Roese wrote:
> This patchset enhaces the recently added Orion Timer driver to support
> all other Kirkwood & 32bit MVEBU Armada platforms. Additionally, this
> timer support is then enabled per default for those platforms, so that
> the board config files don't need to be changed. Also necessary is
> some dts hacking, so that the timer DT node is available in early
> U-Boot stages.
> 
> I've successfully tested this patchset on an Armada XP board. Additional
> test on other boards and platforms are very welcome and necessary.
> 
> Thanks,
> Stefan
> 
> Stefan Roese (8):
>    timer: orion-timer: Use timer_conv_64() to fix timer wrap around
>    timer: orion-timer: Add support for other Armada SoC's
>    timer: orion-timer: Add timer_get_boot_us() for BOOTSTAGE support
>    arm: mvebu: Use CONFIG_TIMER on all MVEBU & KIRKWOOD platforms
>    arm: mvebu: dts: Makefile: Compile Armada 375 dtb in a separate step
>    arm: mvebu: dts: armada-375.dtsi: Add timer0 & timer1
>    arm: mvebu: dts: mvebu-u-boot.dtsi: Add "u-boot,dm-pre-reloc" to timer
>      DT node
>    kirkwood: lsxl: Sync defconfigs
> 
>   arch/arm/Kconfig                          |   4 +
>   arch/arm/dts/Makefile                     |   6 +-
>   arch/arm/dts/armada-375.dtsi              |   4 +-
>   arch/arm/dts/mvebu-u-boot.dtsi            |  11 +++
>   arch/arm/mach-mvebu/include/mach/config.h |   5 --
>   configs/lschlv2_defconfig                 |   2 -
>   configs/lsxhl_defconfig                   |   2 -
>   drivers/timer/Kconfig                     |   5 +-
>   drivers/timer/orion-timer.c               | 103 +++++++++++++++++++---
>   9 files changed, 118 insertions(+), 24 deletions(-)
> 

Applied to u-boot-marvell/next

Thanks,
Stefan