[PATCH] ARM: dts: at91: sam9x60ek: fix indentation for pinctrl sub-nodes

[Michael Nazzareno Trimarchi]

Hi

On Tue, Sep 20, 2022 at 10:33 AM Dario Binacchi
<dario.binacchi at amarulasolutions.com> wrote:
>
> The indentation went far on the right due to an extra tab for
> each pinctrl sub-nodes.
>
> Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
> ---
>
>  arch/arm/dts/sam9x60ek.dts | 36 ++++++++++++++++++------------------
>  1 file changed, 18 insertions(+), 18 deletions(-)
>
> diff --git a/arch/arm/dts/sam9x60ek.dts b/arch/arm/dts/sam9x60ek.dts
> index 54c694bd7848..eb44868a3e3e 100644
> --- a/arch/arm/dts/sam9x60ek.dts
> +++ b/arch/arm/dts/sam9x60ek.dts
> @@ -80,26 +80,26 @@
>                         };
>
>                         pinctrl {
> -                                       pinctrl_qspi: qspi {
> -                                               atmel,pins =
> -                                                       <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE
> -                                                        AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE
> -                                                        AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
> -                                                        AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
> -                                                        AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
> -                                                        AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
> -                                       };
> +                               pinctrl_qspi: qspi {
> +                                       atmel,pins =
> +                                               <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE
> +                                                AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE
> +                                                AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
> +                                                AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
> +                                                AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
> +                                                AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
> +                               };
>
> -                                       pinctrl_flx0: flx0_default {
> -                                               atmel,pins =
> -                                                       <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
> -                                                        AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> -                                       };
> +                               pinctrl_flx0: flx0_default {
> +                                       atmel,pins =
> +                                               <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
> +                                                AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> +                               };
>
> -                                       pinctrl_onewire_tm_default: onewire_tm_default {
> -                                               atmel,pins =
> -                                                       <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
> -                                       };
> +                               pinctrl_onewire_tm_default: onewire_tm_default {
> +                                       atmel,pins =
> +                                               <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
> +                               };
>
>                         };
>                 };
> --
> 2.32.0
>
>

Reviewed-By: Michael Trimarchi <michael at amarulasolutions.com>


-- 
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
michael at amarulasolutions.com
__________________________________

Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
info at amarulasolutions.com
www.amarulasolutions.com