[PATCH v4 0/5] arm: mvebu: Support for 98DX25xx/98DX35xx (AlleyCat5)
Chris Packham
judge.packham at gmail.com
Thu Sep 22 05:31:11 CEST 2022
These patches are based on Marvell's bootloader for the AlleyCat5/5X
which was based on u-boot 2018.03. I've split that code into consumable
chunks and dropped as much unnecessary stuff as I can. I've also tried
to sync the device trees as much as possible with the support that will
land in Linux 6.0 although there are still some differences
Changes in v4:
- Collect r-by from Stefan
- Remove unused mvebu_get_nand_clock() (will return in a later series)
- Remove unnecessary #ifdefs
- Misc style cleanups
- Replace CONFIG_MVEBU_SAR with simpler code implemented directly in
soc.c based around get_sar_freq which the 32-bit platforms already
use.
- Move CONFIG_DISPLAY_BOARDINFO_LATE and CONFIG_ENV_OVERWRITE to
the defconfig.
- Remove CONFIG_BAUDRATE as this is already set in the default config
- Remove CONFIG_USB_MAX_CONTROLLER_COUNT as this is not needed with
DM_USB
- Remove CONFIG_PREBOOT as we don't have anything to run
- Remove commented out CONFIG_BOARD_EARLY_INIT_R
- Remove DEBUG_UART configuration
- Remove unnecessary console environment variable
- Remove CONFIG_MVEBU_SAR
Changes in v3:
- Remove unnecessary changes to RX descriptor handling
- Use dev_get_dma_range() to parse dma-ranges property from parent
device.
- Remove unnecessary dma-ranges property from ethernet nodes (mvneta now
correctly parses the property from the parent node).
- Keep soc_print_clock_info and soc_print_device_info local to
alleycat5.
- Remove MMC and UBIFS distroboot options (MMC driver is not currently
functional, NAND is not populated on the RD-AC5X board)
- Remove unnecessary Ethernet configuration
- Remove unnecessary NAND configuration
- Remove memory node from dts so the value passed by the DDR FW will be
used
Changes in v2:
- Use distro boot by default
- remove unnecessary SPI-NOR partitions
Chris Packham (5):
net: mvneta: Add support for AlleyCat5
usb: ehci: ehci-marvell: Support for marvell,ac5-ehci
pinctrl: mvebu: Add AlleyCat5 support
arm: mvebu: Support for 98DX25xx/98DX35xx SoC
arm: mvebu: Add RD-AC5X board
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/ac5-98dx25xx.dtsi | 277 +++++++++++++++++++
arch/arm/dts/ac5-98dx35xx-rd.dts | 129 +++++++++
arch/arm/dts/ac5-98dx35xx.dtsi | 17 ++
arch/arm/mach-mvebu/Kconfig | 13 +-
arch/arm/mach-mvebu/Makefile | 1 +
arch/arm/mach-mvebu/alleycat5/Makefile | 8 +
arch/arm/mach-mvebu/alleycat5/cpu.c | 124 +++++++++
arch/arm/mach-mvebu/alleycat5/soc.c | 298 +++++++++++++++++++++
arch/arm/mach-mvebu/alleycat5/soc.h | 7 +
arch/arm/mach-mvebu/arm64-common.c | 5 +
arch/arm/mach-mvebu/include/mach/cpu.h | 4 +
board/Marvell/mvebu_alleycat-5/MAINTAINERS | 6 +
board/Marvell/mvebu_alleycat-5/Makefile | 3 +
board/Marvell/mvebu_alleycat-5/board.c | 28 ++
configs/mvebu_ac5_rd_defconfig | 84 ++++++
drivers/net/Kconfig | 2 +-
drivers/net/mvneta.c | 43 ++-
drivers/pinctrl/mvebu/Kconfig | 2 +-
drivers/usb/host/Kconfig | 1 +
drivers/usb/host/ehci-marvell.c | 57 +++-
include/configs/mvebu_alleycat-5.h | 42 +++
22 files changed, 1139 insertions(+), 15 deletions(-)
create mode 100644 arch/arm/dts/ac5-98dx25xx.dtsi
create mode 100644 arch/arm/dts/ac5-98dx35xx-rd.dts
create mode 100644 arch/arm/dts/ac5-98dx35xx.dtsi
create mode 100644 arch/arm/mach-mvebu/alleycat5/Makefile
create mode 100644 arch/arm/mach-mvebu/alleycat5/cpu.c
create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.c
create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.h
create mode 100644 board/Marvell/mvebu_alleycat-5/MAINTAINERS
create mode 100644 board/Marvell/mvebu_alleycat-5/Makefile
create mode 100644 board/Marvell/mvebu_alleycat-5/board.c
create mode 100644 configs/mvebu_ac5_rd_defconfig
create mode 100644 include/configs/mvebu_alleycat-5.h
--
2.37.3
More information about the U-Boot
mailing list