[PATCH] gpio: turris_omnia_mcu: Fix registering gpios
Pali Rohár
pali at kernel.org
Thu Sep 22 13:25:13 CEST 2022
Currently all GPIOs supported by CMD_EXT_CONTROL/CMD_GET_EXT_CONTROL_STATUS
commands (last 16 GPIOs) are available only when FEAT_PERIPH_MCU feature
bit is set. So do not register these GPIOs by U-Boot driver when this
feature bit is not set, so U-Boot 'gpio' command would see only GPIOs which
really exists.
Fixes: 5e4d24ccc115 ("gpio: Add Turris Omnia MCU driver")
Signed-off-by: Pali Rohár <pali at kernel.org>
---
drivers/gpio/turris_omnia_mcu.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/gpio/turris_omnia_mcu.c b/drivers/gpio/turris_omnia_mcu.c
index 986ccde6bc70..2d2bf2d1dd69 100644
--- a/drivers/gpio/turris_omnia_mcu.c
+++ b/drivers/gpio/turris_omnia_mcu.c
@@ -16,6 +16,8 @@ enum commands_e {
/* available if FEAT_EXT_CMDS bit is set in features */
CMD_GET_EXT_STATUS_DWORD = 0x11,
+
+ /* available if FEAT_EXT_CMDS and FEAT_PERIPH_MCU bits are set in featurs */
CMD_EXT_CONTROL = 0x12,
CMD_GET_EXT_CONTROL_STATUS = 0x13,
};
@@ -54,6 +56,7 @@ enum ctl_byte_e {
/* CMD_GET_FEATURES */
enum features_e {
+ FEAT_PERIPH_MCU = BIT(0),
FEAT_EXT_CMDS = BIT(1),
};
@@ -84,10 +87,12 @@ static int turris_omnia_mcu_get_function(struct udevice *dev, uint offset)
return -EINVAL;
return GPIOF_INPUT;
- /* bank 2 - supported only when FEAT_EXT_CMDS is set */
+ /* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */
case (16 + 32 + 0) ... (16 + 32 + 15):
if (!(info->features & FEAT_EXT_CMDS))
return -EINVAL;
+ if (!(info->features & FEAT_PERIPH_MCU))
+ return -EINVAL;
return GPIOF_OUTPUT;
default:
@@ -120,10 +125,12 @@ static int turris_omnia_mcu_get_value(struct udevice *dev, uint offset)
return ((((u32)val32[3] << 24) | ((u32)val32[2] << 16) |
((u32)val32[1] << 8) | val32[0]) >> (offset - 16)) & 0x1;
- /* bank 2 - supported only when FEAT_EXT_CMDS is set */
+ /* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */
case (16 + 32 + 0) ... (16 + 32 + 15):
if (!(info->features & FEAT_EXT_CMDS))
return -EINVAL;
+ if (!(info->features & FEAT_PERIPH_MCU))
+ return -EINVAL;
ret = dm_i2c_read(dev, CMD_GET_EXT_CONTROL_STATUS, val16, 2);
if (ret)
return ret;
@@ -162,10 +169,12 @@ static int turris_omnia_mcu_set_value(struct udevice *dev, uint offset, int valu
val16[0] = value ? val16[1] : 0;
return dm_i2c_write(dev, CMD_GENERAL_CONTROL, val16, sizeof(val16));
- /* bank 2 - supported only when FEAT_EXT_CMDS is set */
+ /* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */
case (16 + 32 + 0) ... (16 + 32 + 15):
if (!(info->features & FEAT_EXT_CMDS))
return -EINVAL;
+ if (!(info->features & FEAT_PERIPH_MCU))
+ return -EINVAL;
val32[3] = BIT(offset - 16 - 32) >> 8;
val32[2] = BIT(offset - 16 - 32) & 0xff;
val32[1] = value ? val32[3] : 0;
@@ -282,8 +291,10 @@ static int turris_omnia_mcu_probe(struct udevice *dev)
uc_priv->bank_name = "mcu_";
- if (info->features & FEAT_EXT_CMDS)
+ if ((info->features & FEAT_EXT_CMDS) && (info->features & FEAT_PERIPH_MCU))
uc_priv->gpio_count = 16 + 32 + 16;
+ else if (info->features & FEAT_EXT_CMDS)
+ uc_priv->gpio_count = 16 + 32;
else
uc_priv->gpio_count = 16;
--
2.20.1
More information about the U-Boot
mailing list