[PATCH 2/3] arm: mvebu: Add support for specifying VHV_Enable GPIO

[Pali Rohár]

VHV_Enable GPIO is required to enable during eFuse programming on Armada
SoCs not from 3700 family. Add support for enabling and disabling VHV pin
via GPIO during eFuse programming, when specified.

All details are in Marvell AN-389: ARMADA VHV Power document
(Doc. No. MV-S302545-00 Rev. C, August 2, 2016).

Note that due to HW Errata 3.6 eFuse erroneous burning (Ref #: HWE-3718342)
VHV power must be disabled while core voltage is off to prevent erroneous
eFuse programming.

This is specified in Marvell ARMADA 380/385/388 Functional Errata,
Guidelines, and Restrictions document
(Doc. No. MV-S501377-00 Rev. D, December 1, 2016).

Signed-off-by: Pali Rohár <pali at kernel.org>
---
 arch/arm/mach-mvebu/Kconfig | 15 +++++++++++++
 arch/arm/mach-mvebu/efuse.c | 42 ++++++++++++++++++++++++++++++++++---
 2 files changed, 54 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index a81b8e2b0df2..d41a0a087bd1 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -347,6 +347,21 @@ config MVEBU_EFUSE_FAKE
 	  from a memory block.
 	  This is can be used for testing prog scripts.
 
+config MVEBU_EFUSE_VHV_GPIO
+	string "VHV_Enable GPIO name for eFuse programming"
+	depends on MVEBU_EFUSE && !ARMADA_3700
+	help
+	  The eFuse programing (burning) phase requires supplying 1.8V to the
+	  device on the VHV power pin, while for normal operation the VHV power
+	  rail must be left unconnected. See Marvell AN-389: ARMADA VHV Power
+	  document (Doc. No. MV-S302545-00 Rev. C, August 2, 2016) for details.
+	  .
+	  This specify VHV_Enable GPIO name used in U-Boot for enabling VHV power.
+
+config MVEBU_EFUSE_VHV_GPIO_ACTIVE_LOW
+	bool "VHV_Enable GPIO is Active Low"
+	depends on MVEBU_EFUSE_VHV_GPIO != ""
+
 config SECURED_MODE_IMAGE
 	bool "Build image for trusted boot"
 	default false
diff --git a/arch/arm/mach-mvebu/efuse.c b/arch/arm/mach-mvebu/efuse.c
index 4b0433782171..be5dc0e07d9b 100644
--- a/arch/arm/mach-mvebu/efuse.c
+++ b/arch/arm/mach-mvebu/efuse.c
@@ -10,6 +10,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/efuse.h>
 #include <asm/arch/soc.h>
+#include <asm/gpio.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/mbus.h>
@@ -56,17 +57,48 @@ static struct mvebu_hd_efuse *get_efuse_line(int nr)
 	return efuses + nr;
 }
 
-static void enable_efuse_program(void)
+#ifndef DRY_RUN
+static int vhv_gpio;
+#endif
+
+static int enable_efuse_program(void)
 {
 #ifndef DRY_RUN
+	if (CONFIG_MVEBU_EFUSE_VHV_GPIO[0]) {
+		if (gpio_lookup_name(CONFIG_MVEBU_EFUSE_VHV_GPIO, NULL, NULL, &vhv_gpio)) {
+			printf("Error: VHV gpio lookup failed\n");
+			return -EOPNOTSUPP;
+		}
+		if (gpio_request(vhv_gpio, CONFIG_MVEBU_EFUSE_VHV_GPIO)) {
+			printf("Error: VHV gpio request failed\n");
+			return -EOPNOTSUPP;
+		}
+		if (gpio_direction_output(vhv_gpio,
+		    IS_ENABLED(CONFIG_MVEBU_EFUSE_VHV_GPIO_ACTIVE_LOW) ? 0 : 1)) {
+			printf("Error: VHV gpio enable failed\n");
+			return -EINVAL;
+		}
+		mdelay(5); /* Wait for the VHV power to stabilize */
+	}
+
 	setbits_le32(MVEBU_EFUSE_CONTROL, MVEBU_EFUSE_CTRL_PROGRAM_ENABLE);
 #endif
+
+	return 0;
 }
 
 static void disable_efuse_program(void)
 {
 #ifndef DRY_RUN
 	clrbits_le32(MVEBU_EFUSE_CONTROL, MVEBU_EFUSE_CTRL_PROGRAM_ENABLE);
+
+	if (CONFIG_MVEBU_EFUSE_VHV_GPIO[0]) {
+		if (gpio_direction_output(vhv_gpio,
+		    IS_ENABLED(CONFIG_MVEBU_EFUSE_VHV_GPIO_ACTIVE_LOW) ? 1 : 0))
+			printf("Error: VHV gpio disable failed\n");
+		gpio_free(vhv_gpio);
+		vhv_gpio = 0;
+	}
 #endif
 }
 
@@ -123,7 +155,9 @@ static int prog_efuse(int nr, struct efuse_val *new_val, u32 mask0, u32 mask1)
 	if (!new_val->dwords.d[0] && !new_val->dwords.d[1] && (mask0 | mask1))
 		return 0;
 
-	enable_efuse_program();
+	res = enable_efuse_program();
+	if (res)
+		return res;
 
 	res = do_prog_efuse(efuse, new_val, mask0, mask1);
 
@@ -155,7 +189,9 @@ int mvebu_prog_ld_efuse(int ld1, u32 word, u32 val)
 	if (val == (line[word] & val))
 		return 0;
 
-	enable_efuse_program();
+	res = enable_efuse_program();
+	if (res)
+		return res;
 
 	mvebu_read_ld_efuse(ld1, line);
 	line[word] |= val;
-- 
2.20.1