[PATCH v2 4/5] verdin-imx8mm: various config additions and improvements

[Marcel Ziswiler]

Hi Stefano

On Mon, 2022-09-19 at 14:39 +0200, Stefano Babic wrote:
> On 18.09.22 22:41, sbabic at denx.de wrote:
> > > From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > > - integrate bootcount using SNVS_LP general purpose register LPGPR0
> > > - enable link-time optimisation
> > > - explicitly set a boot delay of one second
> > > - enable CRC32 and MD5
> > > - enable command for low-level access to data in a partition
> > > - enable time commands
> > > - enable PMIC commands
> > > - improve ETHPRIME configuration
> > > - enable eMMC HS400 functionality
> > > - enable fixed PHY and MDIO driver model
> > > - remove stale PFUZE100 PMIC driver
> > > - enable thermal management unit driver
> > > - enable more USB host functionality
> > > - enable hexdump
> > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > Applied to u-boot-imx, master, thanks !
> > 
> 
> Not yet: Patch 4/5 and 5/5 require a rebase, I avoid to do it myself as 
> I cannot then test if it is ok. These two patches are not in my PR, I 
> can pick them up if you repost them.

Sure.

Sorry, I missed this email as you missed CCing anybody else (e.g. like my work email).

Plus you probably missed this:

https://patchwork.ozlabs.org/project/uboot/cover/20220822130604.843081-1-marcel@ziswiler.com/#2953792

Anyway, I will send an additional series including Patch 4/5, Patch 5/5 and fixing v2 vs. v1 (and more).

Thanks!

> Best regards,
> Stefano Babic

Cheers

Marcel