[PATCH v3 2/3] verdin-imx8mm: various config additions and improvements

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler at toradex.com>

- enable bootcount command
- integrate bootcount using SNVS_LP general purpose register LPGPR0
- enable link-time optimisation
- explicitly set a boot delay of one second
- enable CRC32 and MD5
- enable command for low-level access to data in a partition
- enable time commands
- enable PMIC commands
- improve ETHPRIME configuration
- enable eMMC HS400 functionality
- enable fixed PHY and MDIO driver model
- remove stale PFUZE100 PMIC driver
- enable thermal management unit driver
- enable more USB host functionality
- enable hexdump

Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>

---

Changes in v3:
- Drop SNVS_LP general purpose register LPGPR0 based bootcount
  integration in favour of using the environment based one as that is
  what our update system uses.

 configs/verdin-imx8mm_defconfig | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig
index 9b9b684ccbc..25cd59b185e 100644
--- a/configs/verdin-imx8mm_defconfig
+++ b/configs/verdin-imx8mm_defconfig
@@ -15,10 +15,7 @@ CONFIG_SYS_PROMPT="Verdin iMX8MM # "
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090
 CONFIG_SPL=y
-CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_SYS_LOAD_ADDR=0x48200000
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
@@ -92,7 +89,7 @@ CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_BLOCKSIZE=4096
 CONFIG_SPL_DM=y
 CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000
+CONFIG_BOOTCOUNT_ENV=y
 CONFIG_SPL_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_SPL_CLK_IMX8MM=y
-- 
2.35.1