[PATCH v5 0/5] arm: mvebu: Support for 98DX25xx/98DX35xx (AlleyCat5)

[Chris Packham]

These patches are based on Marvell's bootloader for the AlleyCat5/5X
which was based on u-boot 2018.03. I've split that code into consumable
chunks and dropped as much unnecessary stuff as I can. I've also tried
to sync the device trees as much as possible with the support that will
land in Linux 6.0 although there are still some differences

Changes in v5:
- Minor white space cleanups
- Collect review from Stefan
- Minor fixup for checkpatch.pl complaint
- Remove unused bpard_{early,late}_init{,_r,_f} functions
- Remove CONFIG_PCI and CONFIG_E1000 as the PCI interface is not
  currently working (requires more vendor code)
- Use CONFIG_OF_SEPARATE instead of CONFIG_OF_EMBED

Changes in v4:
- Collect r-by from Stefan
- Remove unused mvebu_get_nand_clock() (will return in a later series)
- Remove unnecessary #ifdefs
- Misc style cleanups
- Replace CONFIG_MVEBU_SAR with simpler code implemented directly in
  soc.c based around get_sar_freq which the 32-bit platforms already
  use.
- Move CONFIG_DISPLAY_BOARDINFO_LATE and CONFIG_ENV_OVERWRITE to
  the defconfig.
- Remove CONFIG_BAUDRATE as this is already set in the default config
- Remove CONFIG_USB_MAX_CONTROLLER_COUNT as this is not needed with
  DM_USB
- Remove CONFIG_PREBOOT as we don't have anything to run
- Remove commented out CONFIG_BOARD_EARLY_INIT_R
- Remove DEBUG_UART configuration
- Remove unnecessary console environment variable
- Remove CONFIG_MVEBU_SAR

Changes in v3:
- Remove unnecessary changes to RX descriptor handling
- Use dev_get_dma_range() to parse dma-ranges property from parent
  device.
- Remove unnecessary dma-ranges property from ethernet nodes (mvneta now
  correctly parses the property from the parent node).
- Keep soc_print_clock_info and soc_print_device_info local to
  alleycat5.
- Remove MMC and UBIFS distroboot options (MMC driver is not currently
  functional, NAND is not populated on the RD-AC5X board)
- Remove unnecessary Ethernet configuration
- Remove unnecessary NAND configuration
- Remove memory node from dts so the value passed by the DDR FW will be
  used

Changes in v2:
- Use distro boot by default
- remove unnecessary SPI-NOR partitions

Chris Packham (5):
  net: mvneta: Add support for AlleyCat5
  usb: ehci: ehci-marvell: Support for marvell,ac5-ehci
  pinctrl: mvebu: Add AlleyCat5 support
  arm: mvebu: Support for 98DX25xx/98DX35xx SoC
  arm: mvebu: Add RD-AC5X board

 arch/arm/dts/Makefile                      |   3 +-
 arch/arm/dts/ac5-98dx25xx.dtsi             | 277 +++++++++++++++++++
 arch/arm/dts/ac5-98dx35xx-rd.dts           | 129 +++++++++
 arch/arm/dts/ac5-98dx35xx.dtsi             |  17 ++
 arch/arm/mach-mvebu/Kconfig                |  13 +-
 arch/arm/mach-mvebu/Makefile               |   1 +
 arch/arm/mach-mvebu/alleycat5/Makefile     |   8 +
 arch/arm/mach-mvebu/alleycat5/cpu.c        | 124 +++++++++
 arch/arm/mach-mvebu/alleycat5/soc.c        | 298 +++++++++++++++++++++
 arch/arm/mach-mvebu/alleycat5/soc.h        |   7 +
 arch/arm/mach-mvebu/arm64-common.c         |   5 +
 arch/arm/mach-mvebu/include/mach/cpu.h     |   4 +
 board/Marvell/mvebu_alleycat-5/MAINTAINERS |   6 +
 board/Marvell/mvebu_alleycat-5/Makefile    |   3 +
 board/Marvell/mvebu_alleycat-5/board.c     |  13 +
 configs/mvebu_ac5_rd_defconfig             |  80 ++++++
 drivers/net/Kconfig                        |   2 +-
 drivers/net/mvneta.c                       |  43 ++-
 drivers/pinctrl/mvebu/Kconfig              |   2 +-
 drivers/usb/host/Kconfig                   |   1 +
 drivers/usb/host/ehci-marvell.c            |  53 +++-
 include/configs/mvebu_alleycat-5.h         |  42 +++
 22 files changed, 1118 insertions(+), 13 deletions(-)
 create mode 100644 arch/arm/dts/ac5-98dx25xx.dtsi
 create mode 100644 arch/arm/dts/ac5-98dx35xx-rd.dts
 create mode 100644 arch/arm/dts/ac5-98dx35xx.dtsi
 create mode 100644 arch/arm/mach-mvebu/alleycat5/Makefile
 create mode 100644 arch/arm/mach-mvebu/alleycat5/cpu.c
 create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.c
 create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.h
 create mode 100644 board/Marvell/mvebu_alleycat-5/MAINTAINERS
 create mode 100644 board/Marvell/mvebu_alleycat-5/Makefile
 create mode 100644 board/Marvell/mvebu_alleycat-5/board.c
 create mode 100644 configs/mvebu_ac5_rd_defconfig
 create mode 100644 include/configs/mvebu_alleycat-5.h

-- 
2.37.3