[Uboot-stm32] [PATCH] stm32mp: stm32prog: improve the partitioning trace

[Patrice CHOTARD]

HI Patrick

On 9/12/22 08:43, Patrice CHOTARD wrote:
> Hi Patrick
> 
> On 9/9/22 17:22, Patrick Delaunay wrote:
>> Improve the partitioning trace done in command stm32prog:
>> - remove the trace "partition: Done" when the GPT partitioning is not done
>> - indicate the mmc instance used for each 'gpt write' command
>>
>> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
>> ---
>>
>>  arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
>> index c391b6c7abb..7ee4590ef26 100644
>> --- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
>> +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
>> @@ -1090,7 +1090,6 @@ static int create_gpt_partitions(struct stm32prog_data *data)
>>  	if (!buf)
>>  		return -ENOMEM;
>>  
>> -	puts("partitions : ");
>>  	/* initialize the selected device */
>>  	for (i = 0; i < data->dev_nb; i++) {
>>  		/* create gpt partition support only for full update on MMC */
>> @@ -1098,6 +1097,7 @@ static int create_gpt_partitions(struct stm32prog_data *data)
>>  		    !data->dev[i].full_update)
>>  			continue;
>>  
>> +		printf("partitions on mmc%d: ", data->dev[i].dev_id);
>>  		offset = 0;
>>  		rootfs_found = false;
>>  		memset(buf, 0, buflen);
>> @@ -1197,8 +1197,8 @@ static int create_gpt_partitions(struct stm32prog_data *data)
>>  		sprintf(buf, "part list mmc %d", data->dev[i].dev_id);
>>  		run_command(buf, 0);
>>  #endif
>> +		puts("done\n");
>>  	}
>> -	puts("done\n");
>>  
>>  #ifdef DEBUG
>>  	run_command("mtd list", 0);
> 
> Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
> 
> Thanks
> Patrice
> _______________________________________________
> Uboot-stm32 mailing list
> Uboot-stm32 at st-md-mailman.stormreply.com
> https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32

Applied on u-boot-stm32/next

Thanks
Patrice