[PATCH] board: st: stm32mp1: use of correct compatible string to add partitions

[Patrice CHOTARD]

Hi Patrick

On 9/23/22 13:38, Patrice CHOTARD wrote:
> Hi
> 
> On 9/12/22 17:40, Patrick Delaunay wrote:
>> From: Christophe Kerello <christophe.kerello at foss.st.com>
>>
>> Current compatible string used to update SPI NAND and SPI NOR devices
>> can lead to a wrong partitions update (for example, SPI NAND partitions
>> added to SPI NOR node in the device tree). To avoid this wrong behavior,
>> use jedec,spi-nor compatible string for SPI NOR devices and spi-nand
>> compatible string for SPI NAND devices.
>>
>> Signed-off-by: Christophe Kerello <christophe.kerello at foss.st.com>
>> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
>> ---
>>
>>  board/st/stm32mp1/stm32mp1.c | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
>> index 8c162b42a59..7dc26f850ff 100644
>> --- a/board/st/stm32mp1/stm32mp1.c
>> +++ b/board/st/stm32mp1/stm32mp1.c
>> @@ -898,8 +898,8 @@ int mmc_get_env_dev(void)
>>  int ft_board_setup(void *blob, struct bd_info *bd)
>>  {
>>  	static const struct node_info nodes[] = {
>> -		{ "st,stm32f469-qspi",		MTD_DEV_TYPE_NOR,  },
>> -		{ "st,stm32f469-qspi",		MTD_DEV_TYPE_SPINAND},
>> +		{ "jedec,spi-nor",		MTD_DEV_TYPE_NOR,  },
>> +		{ "spi-nand",			MTD_DEV_TYPE_SPINAND},
>>  		{ "st,stm32mp15-fmc2",		MTD_DEV_TYPE_NAND, },
>>  		{ "st,stm32mp1-fmc2-nfc",	MTD_DEV_TYPE_NAND, },
>>  	};
> 
> Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
> 
> Thanks
> Patrice


Applied on u-boot-stm32/next

Thanks

PAtrice