[PATCH 5/7] include/dt-bindings: Sync linux-event-codes with Linux kernel
Kever Yang
kever.yang at rock-chips.com
Sat Sep 24 09:59:38 CEST 2022
On 2022/9/22 20:12, Quentin Schulz wrote:
> From: Quentin Schulz <quentin.schulz at theobroma-systems.com>
>
> Sync include/dt-bindings/input/linux-event-codes.h with
> include/uapi/linux/input-event-codes.h from Linux kernel v6.0-rc6.
>
> Cc: Quentin Schulz <foss+uboot at 0leil.net>
> Signed-off-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> include/dt-bindings/input/linux-event-codes.h | 173 +++++++++++++++++-
> 1 file changed, 170 insertions(+), 3 deletions(-)
>
> diff --git a/include/dt-bindings/input/linux-event-codes.h b/include/dt-bindings/input/linux-event-codes.h
> index 331458c0e7..dff8e7f170 100644
> --- a/include/dt-bindings/input/linux-event-codes.h
> +++ b/include/dt-bindings/input/linux-event-codes.h
> @@ -1,3 +1,4 @@
> +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
> /*
> * Input event codes
> *
> @@ -277,7 +278,8 @@
> #define KEY_PAUSECD 201
> #define KEY_PROG3 202
> #define KEY_PROG4 203
> -#define KEY_DASHBOARD 204 /* AL Dashboard */
> +#define KEY_ALL_APPLICATIONS 204 /* AC Desktop Show All Applications */
> +#define KEY_DASHBOARD KEY_ALL_APPLICATIONS
> #define KEY_SUSPEND 205
> #define KEY_CLOSE 206 /* AC Close */
> #define KEY_PLAY 207
> @@ -406,6 +408,7 @@
> #define BTN_TOOL_MOUSE 0x146
> #define BTN_TOOL_LENS 0x147
> #define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
> +#define BTN_STYLUS3 0x149
> #define BTN_TOUCH 0x14a
> #define BTN_STYLUS 0x14b
> #define BTN_STYLUS2 0x14c
> @@ -437,10 +440,12 @@
> #define KEY_TITLE 0x171
> #define KEY_SUBTITLE 0x172
> #define KEY_ANGLE 0x173
> -#define KEY_ZOOM 0x174
> +#define KEY_FULL_SCREEN 0x174 /* AC View Toggle */
> +#define KEY_ZOOM KEY_FULL_SCREEN
> #define KEY_MODE 0x175
> #define KEY_KEYBOARD 0x176
> -#define KEY_SCREEN 0x177
> +#define KEY_ASPECT_RATIO 0x177 /* HUTRR37: Aspect */
> +#define KEY_SCREEN KEY_ASPECT_RATIO
> #define KEY_PC 0x178 /* Media Select Computer */
> #define KEY_TV 0x179 /* Media Select TV */
> #define KEY_TV2 0x17a /* Media Select Cable */
> @@ -511,6 +516,9 @@
> #define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
> #define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
> #define KEY_IMAGES 0x1ba /* AL Image Browser */
> +#define KEY_NOTIFICATION_CENTER 0x1bc /* Show/hide the notification center */
> +#define KEY_PICKUP_PHONE 0x1bd /* Answer incoming call */
> +#define KEY_HANGUP_PHONE 0x1be /* Decline incoming call */
>
> #define KEY_DEL_EOL 0x1c0
> #define KEY_DEL_EOS 0x1c1
> @@ -538,6 +546,7 @@
> #define KEY_FN_F 0x1e2
> #define KEY_FN_S 0x1e3
> #define KEY_FN_B 0x1e4
> +#define KEY_FN_RIGHT_SHIFT 0x1e5
>
> #define KEY_BRL_DOT1 0x1f1
> #define KEY_BRL_DOT2 0x1f2
> @@ -592,6 +601,7 @@
> #define BTN_DPAD_RIGHT 0x223
>
> #define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */
> +#define KEY_ROTATE_LOCK_TOGGLE 0x231 /* Display rotation lock */
>
> #define KEY_BUTTONCONFIG 0x240 /* AL Button Configuration */
> #define KEY_TASKMANAGER 0x241 /* AL Task/Project Manager */
> @@ -600,6 +610,10 @@
> #define KEY_APPSELECT 0x244 /* AL Select Task/Application */
> #define KEY_SCREENSAVER 0x245 /* AL Screen Saver */
> #define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */
> +#define KEY_ASSISTANT 0x247 /* AL Context-aware desktop assistant */
> +#define KEY_KBD_LAYOUT_NEXT 0x248 /* AC Next Keyboard Layout Select */
> +#define KEY_EMOJI_PICKER 0x249 /* Show/hide emoji picker (HUTRR101) */
> +#define KEY_DICTATE 0x24a /* Start or Stop Voice Dictation Session (HUTRR99) */
>
> #define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
> #define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
> @@ -611,6 +625,139 @@
> #define KEY_KBDINPUTASSIST_ACCEPT 0x264
> #define KEY_KBDINPUTASSIST_CANCEL 0x265
>
> +/* Diagonal movement keys */
> +#define KEY_RIGHT_UP 0x266
> +#define KEY_RIGHT_DOWN 0x267
> +#define KEY_LEFT_UP 0x268
> +#define KEY_LEFT_DOWN 0x269
> +
> +#define KEY_ROOT_MENU 0x26a /* Show Device's Root Menu */
> +/* Show Top Menu of the Media (e.g. DVD) */
> +#define KEY_MEDIA_TOP_MENU 0x26b
> +#define KEY_NUMERIC_11 0x26c
> +#define KEY_NUMERIC_12 0x26d
> +/*
> + * Toggle Audio Description: refers to an audio service that helps blind and
> + * visually impaired consumers understand the action in a program. Note: in
> + * some countries this is referred to as "Video Description".
> + */
> +#define KEY_AUDIO_DESC 0x26e
> +#define KEY_3D_MODE 0x26f
> +#define KEY_NEXT_FAVORITE 0x270
> +#define KEY_STOP_RECORD 0x271
> +#define KEY_PAUSE_RECORD 0x272
> +#define KEY_VOD 0x273 /* Video on Demand */
> +#define KEY_UNMUTE 0x274
> +#define KEY_FASTREVERSE 0x275
> +#define KEY_SLOWREVERSE 0x276
> +/*
> + * Control a data application associated with the currently viewed channel,
> + * e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.)
> + */
> +#define KEY_DATA 0x277
> +#define KEY_ONSCREEN_KEYBOARD 0x278
> +/* Electronic privacy screen control */
> +#define KEY_PRIVACY_SCREEN_TOGGLE 0x279
> +
> +/* Select an area of screen to be copied */
> +#define KEY_SELECTIVE_SCREENSHOT 0x27a
> +
> +/* Move the focus to the next or previous user controllable element within a UI container */
> +#define KEY_NEXT_ELEMENT 0x27b
> +#define KEY_PREVIOUS_ELEMENT 0x27c
> +
> +/* Toggle Autopilot engagement */
> +#define KEY_AUTOPILOT_ENGAGE_TOGGLE 0x27d
> +
> +/* Shortcut Keys */
> +#define KEY_MARK_WAYPOINT 0x27e
> +#define KEY_SOS 0x27f
> +#define KEY_NAV_CHART 0x280
> +#define KEY_FISHING_CHART 0x281
> +#define KEY_SINGLE_RANGE_RADAR 0x282
> +#define KEY_DUAL_RANGE_RADAR 0x283
> +#define KEY_RADAR_OVERLAY 0x284
> +#define KEY_TRADITIONAL_SONAR 0x285
> +#define KEY_CLEARVU_SONAR 0x286
> +#define KEY_SIDEVU_SONAR 0x287
> +#define KEY_NAV_INFO 0x288
> +#define KEY_BRIGHTNESS_MENU 0x289
> +
> +/*
> + * Some keyboards have keys which do not have a defined meaning, these keys
> + * are intended to be programmed / bound to macros by the user. For most
> + * keyboards with these macro-keys the key-sequence to inject, or action to
> + * take, is all handled by software on the host side. So from the kernel's
> + * point of view these are just normal keys.
> + *
> + * The KEY_MACRO# codes below are intended for such keys, which may be labeled
> + * e.g. G1-G18, or S1 - S30. The KEY_MACRO# codes MUST NOT be used for keys
> + * where the marking on the key does indicate a defined meaning / purpose.
> + *
> + * The KEY_MACRO# codes MUST also NOT be used as fallback for when no existing
> + * KEY_FOO define matches the marking / purpose. In this case a new KEY_FOO
> + * define MUST be added.
> + */
> +#define KEY_MACRO1 0x290
> +#define KEY_MACRO2 0x291
> +#define KEY_MACRO3 0x292
> +#define KEY_MACRO4 0x293
> +#define KEY_MACRO5 0x294
> +#define KEY_MACRO6 0x295
> +#define KEY_MACRO7 0x296
> +#define KEY_MACRO8 0x297
> +#define KEY_MACRO9 0x298
> +#define KEY_MACRO10 0x299
> +#define KEY_MACRO11 0x29a
> +#define KEY_MACRO12 0x29b
> +#define KEY_MACRO13 0x29c
> +#define KEY_MACRO14 0x29d
> +#define KEY_MACRO15 0x29e
> +#define KEY_MACRO16 0x29f
> +#define KEY_MACRO17 0x2a0
> +#define KEY_MACRO18 0x2a1
> +#define KEY_MACRO19 0x2a2
> +#define KEY_MACRO20 0x2a3
> +#define KEY_MACRO21 0x2a4
> +#define KEY_MACRO22 0x2a5
> +#define KEY_MACRO23 0x2a6
> +#define KEY_MACRO24 0x2a7
> +#define KEY_MACRO25 0x2a8
> +#define KEY_MACRO26 0x2a9
> +#define KEY_MACRO27 0x2aa
> +#define KEY_MACRO28 0x2ab
> +#define KEY_MACRO29 0x2ac
> +#define KEY_MACRO30 0x2ad
> +
> +/*
> + * Some keyboards with the macro-keys described above have some extra keys
> + * for controlling the host-side software responsible for the macro handling:
> + * -A macro recording start/stop key. Note that not all keyboards which emit
> + * KEY_MACRO_RECORD_START will also emit KEY_MACRO_RECORD_STOP if
> + * KEY_MACRO_RECORD_STOP is not advertised, then KEY_MACRO_RECORD_START
> + * should be interpreted as a recording start/stop toggle;
> + * -Keys for switching between different macro (pre)sets, either a key for
> + * cycling through the configured presets or keys to directly select a preset.
> + */
> +#define KEY_MACRO_RECORD_START 0x2b0
> +#define KEY_MACRO_RECORD_STOP 0x2b1
> +#define KEY_MACRO_PRESET_CYCLE 0x2b2
> +#define KEY_MACRO_PRESET1 0x2b3
> +#define KEY_MACRO_PRESET2 0x2b4
> +#define KEY_MACRO_PRESET3 0x2b5
> +
> +/*
> + * Some keyboards have a buildin LCD panel where the contents are controlled
> + * by the host. Often these have a number of keys directly below the LCD
> + * intended for controlling a menu shown on the LCD. These keys often don't
> + * have any labeling so we just name them KEY_KBD_LCD_MENU#
> + */
> +#define KEY_KBD_LCD_MENU1 0x2b8
> +#define KEY_KBD_LCD_MENU2 0x2b9
> +#define KEY_KBD_LCD_MENU3 0x2ba
> +#define KEY_KBD_LCD_MENU4 0x2bb
> +#define KEY_KBD_LCD_MENU5 0x2bc
> +
> #define BTN_TRIGGER_HAPPY 0x2c0
> #define BTN_TRIGGER_HAPPY1 0x2c0
> #define BTN_TRIGGER_HAPPY2 0x2c1
> @@ -672,6 +819,16 @@
> #define REL_DIAL 0x07
> #define REL_WHEEL 0x08
> #define REL_MISC 0x09
> +/*
> + * 0x0a is reserved and should not be used in input drivers.
> + * It was used by HID as REL_MISC+1 and userspace needs to detect if
> + * the next REL_* event is correct or is just REL_MISC + n.
> + * We define here REL_RESERVED so userspace can rely on it and detect
> + * the situation described above.
> + */
> +#define REL_RESERVED 0x0a
> +#define REL_WHEEL_HI_RES 0x0b
> +#define REL_HWHEEL_HI_RES 0x0c
> #define REL_MAX 0x0f
> #define REL_CNT (REL_MAX+1)
>
> @@ -708,6 +865,15 @@
>
> #define ABS_MISC 0x28
>
> +/*
> + * 0x2e is reserved and should not be used in input drivers.
> + * It was used by HID as ABS_MISC+6 and userspace needs to detect if
> + * the next ABS_* event is correct or is just ABS_MISC + n.
> + * We define here ABS_RESERVED so userspace can rely on it and detect
> + * the situation described above.
> + */
> +#define ABS_RESERVED 0x2e
> +
> #define ABS_MT_SLOT 0x2f /* MT slot being modified */
> #define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
> #define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
> @@ -750,6 +916,7 @@
> #define SW_LINEIN_INSERT 0x0d /* set = inserted */
> #define SW_MUTE_DEVICE 0x0e /* set = device disabled */
> #define SW_PEN_INSERTED 0x0f /* set = pen inserted */
> +#define SW_MACHINE_COVER 0x10 /* set = cover closed */
> #define SW_MAX 0x10
> #define SW_CNT (SW_MAX+1)
>
More information about the U-Boot
mailing list