[PATCH 38/45] vbe: Add info about the VBE device to the fwupd node

[Simon Glass]

At present we put the driver in the /chosen node in U-Boot. This is a bit
strange, since U-Boot doesn't normally use that node itself. It is better
to put it under the bootstd node.

To make this work we need to copy the node to appear under /chosen when
fixing up the device tree. Copy over all the properties too, so that fwupd
knows what to do.

Update the sandbox device tree accordingly.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/sandbox/dts/test.dts | 29 ++++++++++++++---------------
 boot/vbe_simple_os.c      | 26 ++++++++++++++++++--------
 test/boot/vbe_simple.c    |  7 ++++++-
 3 files changed, 38 insertions(+), 24 deletions(-)

diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index 66391f7135b..bc7e95d2705 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -78,6 +78,7 @@
 	};
 
 	bootstd {
+		u-boot,dm-vpl;
 		compatible = "u-boot,boot-std";
 
 		filename-prefixes = "/", "/boot/";
@@ -90,6 +91,19 @@
 		efi {
 			compatible = "u-boot,distro-efi";
 		};
+
+		firmware0 {
+			u-boot,dm-vpl;
+			compatible = "fwupd,vbe-simple";
+			storage = "mmc1";
+			skip-offset = <0x200>;
+			area-start = <0x400>;
+			area-size = <0x1000>;
+			state-offset = <0x400>;
+			state-size = <0x40>;
+			version-offset = <0x800>;
+			version-size = <0x100>;
+		};
 	};
 
 	fuzzing-engine {
@@ -1392,21 +1406,6 @@
 			compatible = "denx,u-boot-fdt-test";
 			reg = <9 1>;
 		};
-
-		fwupd {
-			compatible = "simple-bus";
-			firmware0 {
-				compatible = "fwupd,vbe-simple";
-				storage = "mmc1";
-				area-start = <0x400>;
-				area-size = <0x1000>;
-				skip-offset = <0x200>;
-				state-offset = <0x400>;
-				state-size = <0x40>;
-				version-offset = <0x800>;
-				version-size = <0x100>;
-			};
-		};
 	};
 
 	translation-test at 8000 {
diff --git a/boot/vbe_simple_os.c b/boot/vbe_simple_os.c
index 87778bba97e..b2041a95a30 100644
--- a/boot/vbe_simple_os.c
+++ b/boot/vbe_simple_os.c
@@ -62,24 +62,34 @@ static int bootmeth_vbe_simple_ft_fixup(void *ctx, struct event *event)
 	 */
 	for (vbe_find_first_device(&dev); dev; vbe_find_next_device(&dev)) {
 		struct simple_state state;
-		ofnode node, subnode;
+		ofnode node, subnode, chosen;
 		int ret;
 
 		if (strcmp("vbe_simple", dev->driver->name))
 			continue;
 
-		/* Check if there is a node to fix up */
-		node = oftree_path(tree, "/chosen/fwupd");
-		if (!ofnode_valid(node))
-			continue;
-		subnode = ofnode_find_subnode(node, dev->name);
-		if (!ofnode_valid(subnode))
+		/* Check if there is a node to fix up, adding if not */
+		chosen = oftree_path(tree, "/chosen");
+		if (!ofnode_valid(chosen))
 			continue;
+		ret = ofnode_add_subnode(chosen, "fwupd", &node);
+		if (ret && ret != -EEXIST)
+			return log_msg_ret("fwu", ret);
+
+		ret = ofnode_add_subnode(node, dev->name, &subnode);
+		if (ret && ret != -EEXIST)
+			return log_msg_ret("dev", ret);
 
-		log_debug("Fixing up: %s\n", dev->name);
 		ret = device_probe(dev);
 		if (ret)
 			return log_msg_ret("probe", ret);
+
+		/* Copy over the vbe properties for fwupd */
+		log_debug("Fixing up: %s\n", dev->name);
+		ret = ofnode_copy_props(dev_ofnode(dev), subnode);
+		if (ret)
+			return log_msg_ret("cp", ret);
+
 		ret = vbe_simple_read_state(dev, &state);
 		if (ret)
 			return log_msg_ret("read", ret);
diff --git a/test/boot/vbe_simple.c b/test/boot/vbe_simple.c
index a50785dbbf6..5e61840652c 100644
--- a/test/boot/vbe_simple.c
+++ b/test/boot/vbe_simple.c
@@ -16,7 +16,12 @@
 #include <test/ut.h>
 #include "bootstd_common.h"
 
-/* Basic test of reading nvdata and updating a fwupd node in the device tree */
+/*
+ * Basic test of reading nvdata and updating a fwupd node in the device tree
+ *
+ * This sets up its own VBE info in the device, using bootstd_setup_for_tests()
+ * then does a VBE fixup and checks that everything is present.
+ */
 static int vbe_simple_test_base(struct unit_test_state *uts)
 {
 	const char *version, *bl_version;
-- 
2.37.3.998.g577e59143f-goog