[PATCH v2 2/7] configs: stm32f769-disco: Fix SPL boot

[Patrick DELAUNAY]

Hi,

On 9/20/22 18:04, Patrice Chotard wrote:
> Commit 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
> replaces CONFIG_SYS_FDT_BASE by CONFIG_SYS_SPL_ARGS_ADDR.
> As CONFIG_SYS_SPL_ARGS_ADDR enables additional code when enable, it
> increases SPL size over the initial 0x8000 limit.
> Increase the SPL size to 0x9000 to fix SPL boot.
> Set SPL_SIZE_LIMIT to 0x9000 to avoid similar issue in the future.
>
> Fixes 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
>
> Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
> ---
>
> (no changes since v1)
>
>   configs/stm32f769-disco_spl_defconfig | 7 ++++---
>   1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig
> index 19d2c24abb..b56d88f9f6 100644
> --- a/configs/stm32f769-disco_spl_defconfig
> +++ b/configs/stm32f769-disco_spl_defconfig
> @@ -1,6 +1,6 @@
>   CONFIG_ARM=y
>   CONFIG_ARCH_STM32=y
> -CONFIG_SYS_TEXT_BASE=0x08008000
> +CONFIG_SYS_TEXT_BASE=0x08009000
>   CONFIG_SYS_MALLOC_LEN=0x100000
>   CONFIG_SYS_MALLOC_F_LEN=0xE00
>   CONFIG_SPL_GPIO=y
> @@ -13,10 +13,11 @@ CONFIG_SPL_TEXT_BASE=0x8000000
>   CONFIG_SYS_PROMPT="U-Boot > "
>   CONFIG_SPL_SERIAL=y
>   CONFIG_SPL_DRIVERS_MISC=y
> +CONFIG_SPL_SIZE_LIMIT=0x9000
>   CONFIG_STM32F7=y
>   CONFIG_TARGET_STM32F746_DISCO=y
>   CONFIG_SPL=y
> -CONFIG_SYS_LOAD_ADDR=0x8008000
> +CONFIG_SYS_LOAD_ADDR=0x8009000
>   CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
>   CONFIG_DISTRO_DEFAULTS=y
>   CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> @@ -28,7 +29,7 @@ CONFIG_AUTOBOOT_STOP_STR=" "
>   CONFIG_USE_BOOTARGS=y
>   CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
>   # CONFIG_DISPLAY_CPUINFO is not set
> -CONFIG_SPL_PAD_TO=0x8000
> +CONFIG_SPL_PAD_TO=0x9000
>   CONFIG_SPL_NO_BSS_LIMIT=y
>   CONFIG_SPL_BOARD_INIT=y
>   CONFIG_SPL_SYS_MALLOC_SIMPLE=y


Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>

Thanks
Patrick