[PATCH v5 09/10] arm_ffa: introduce FF-A MM communication
Abdellatif El Khlifi
abdellatif.elkhlifi at arm.com
Mon Sep 26 16:08:26 CEST 2022
Add MM communication support using FF-A transport
This feature allows accessing MM partitions services through
EFI MM communication protocol. MM partitions such as StandAlonneMM
or smm-gateway secure partitions which reside in secure world.
An MM shared buffer and a door bell event are used to exchange
the data.
The data is used by EFI services such as GetVariable()/SetVariable()
and copied from the communication buffer to the MM shared buffer.
The secure partition is notified about availability of data in the
MM shared buffer by an FF-A message (door bell).
On such event, MM SP can read the data and updates the MM shared
buffer with the response data.
The response data is copied back to the communication buffer and
consumed by the EFI subsystem.
FF-A driver private data is copied to EFI runtime section at
ExitBootServices(). This garantees secure world partitions data are
available at EFI runtime level.
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
Signed-off-by: Gowtham Suresh Kumar <gowtham.sureshkumar at arm.com>
Cc: Tom Rini <trini at konsulko.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Ilias Apalodimas <ilias.apalodimas at linaro.org>
Cc: Jens Wiklander <jens.wiklander at linaro.org>
---
Changelog:
===============
v4:
* use the new FF-A driver interfaces
* discover MM partitions at runtime
* copy FF-A driver private data to EFI runtime section at
ExitBootServices()
* drop use of FFA_ERR_STAT_SUCCESS error code
* replace EFI_BUFFER_TOO_SMALL with EFI_OUT_OF_RESOURCES
in ffa_mm_communicate(). No need for efi_memcpy_runtime() anymore
* revert the error log in mm_communicate() in case of failure
* remove packed attribute from efi_mm_communicate_header and
smm_variable_communicate_header
v2:
* set default values to 0 for FFA_SHARED_MM_BUFFER_SIZE, FFA_SHARED_MM_BUFFER_ADDR and MM_SP_UUID_DATA and add warnings
v1:
* introduce FF-A MM communication
arch/arm/cpu/armv8/cache.S | 19 +++
arch/arm/cpu/armv8/cache_v8.c | 6 +-
include/mm_communication.h | 9 +-
lib/efi_loader/Kconfig | 14 +-
lib/efi_loader/efi_boottime.c | 7 +
lib/efi_loader/efi_variable_tee.c | 263 +++++++++++++++++++++++++++++-
6 files changed, 309 insertions(+), 9 deletions(-)
diff --git a/arch/arm/cpu/armv8/cache.S b/arch/arm/cpu/armv8/cache.S
index d1cee23437..91b7c73c17 100644
--- a/arch/arm/cpu/armv8/cache.S
+++ b/arch/arm/cpu/armv8/cache.S
@@ -3,6 +3,9 @@
* (C) Copyright 2013
* David Feng <fenghua at phytium.com.cn>
*
+ * (C) Copyright 2022 ARM Limited
+ * Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
+ *
* This file is based on sample code from ARMv8 ARM.
*/
@@ -21,7 +24,11 @@
* x1: 0 clean & invalidate, 1 invalidate only
* x2~x9: clobbered
*/
+#ifdef CONFIG_EFI_LOADER
+.pushsection .text.efi_runtime, "ax"
+#else
.pushsection .text.__asm_dcache_level, "ax"
+#endif
ENTRY(__asm_dcache_level)
lsl x12, x0, #1
msr csselr_el1, x12 /* select cache level */
@@ -65,7 +72,11 @@ ENDPROC(__asm_dcache_level)
*
* flush or invalidate all data cache by SET/WAY.
*/
+#ifdef CONFIG_EFI_LOADER
+.pushsection .text.efi_runtime, "ax"
+#else
.pushsection .text.__asm_dcache_all, "ax"
+#endif
ENTRY(__asm_dcache_all)
mov x1, x0
dsb sy
@@ -109,7 +120,11 @@ ENTRY(__asm_flush_dcache_all)
ENDPROC(__asm_flush_dcache_all)
.popsection
+#ifdef CONFIG_EFI_LOADER
+.pushsection .text.efi_runtime, "ax"
+#else
.pushsection .text.__asm_invalidate_dcache_all, "ax"
+#endif
ENTRY(__asm_invalidate_dcache_all)
mov x0, #0x1
b __asm_dcache_all
@@ -182,7 +197,11 @@ ENTRY(__asm_invalidate_icache_all)
ENDPROC(__asm_invalidate_icache_all)
.popsection
+#ifdef CONFIG_EFI_LOADER
+.pushsection .text.efi_runtime, "ax"
+#else
.pushsection .text.__asm_invalidate_l3_dcache, "ax"
+#endif
WEAK(__asm_invalidate_l3_dcache)
mov x0, #0 /* return status as success */
ret
diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
index e4736e5643..45f57372c2 100644
--- a/arch/arm/cpu/armv8/cache_v8.c
+++ b/arch/arm/cpu/armv8/cache_v8.c
@@ -5,10 +5,14 @@
*
* (C) Copyright 2016
* Alexander Graf <agraf at suse.de>
+ *
+ * (C) Copyright 2022 ARM Limited
+ * Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
*/
#include <common.h>
#include <cpu_func.h>
+#include <efi_loader.h>
#include <hang.h>
#include <log.h>
#include <asm/cache.h>
@@ -445,7 +449,7 @@ __weak void mmu_setup(void)
/*
* Performs a invalidation of the entire data cache at all levels
*/
-void invalidate_dcache_all(void)
+void __efi_runtime invalidate_dcache_all(void)
{
__asm_invalidate_dcache_all();
__asm_invalidate_l3_dcache();
diff --git a/include/mm_communication.h b/include/mm_communication.h
index e65fbde60d..fe9104c56d 100644
--- a/include/mm_communication.h
+++ b/include/mm_communication.h
@@ -6,6 +6,8 @@
* Copyright (c) 2017, Intel Corporation. All rights reserved.
* Copyright (C) 2020 Linaro Ltd. <sughosh.ganu at linaro.org>
* Copyright (C) 2020 Linaro Ltd. <ilias.apalodimas at linaro.org>
+ * (C) Copyright 2022 ARM Limited
+ * Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
*/
#ifndef _MM_COMMUNICATION_H_
@@ -13,6 +15,9 @@
#include <part_efi.h>
+/* MM service UUID string (big-endian format). This UUID is common across all MM SPs */
+#define MM_SP_UUID "33d532ed-e699-0942-c09c-a798d9cd722d"
+
/*
* Interface to the pseudo Trusted Application (TA), which provides a
* communication channel with the Standalone MM (Management Mode)
@@ -43,7 +48,7 @@
* To avoid confusion in interpreting frames, the communication buffer should
* always begin with efi_mm_communicate_header.
*/
-struct __packed efi_mm_communicate_header {
+struct efi_mm_communicate_header {
efi_guid_t header_guid;
size_t message_len;
u8 data[];
@@ -145,7 +150,7 @@ struct smm_variable_communicate_header {
* Defined in EDK2 as SMM_VARIABLE_COMMUNICATE_ACCESS_VARIABLE.
*
*/
-struct smm_variable_access {
+struct __packed smm_variable_access {
efi_guid_t guid;
efi_uintn_t data_size;
efi_uintn_t name_size;
diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
index b8fb2701a7..d292f57244 100644
--- a/lib/efi_loader/Kconfig
+++ b/lib/efi_loader/Kconfig
@@ -61,13 +61,23 @@ config EFI_VARIABLE_FILE_STORE
stored as file /ubootefi.var on the EFI system partition.
config EFI_MM_COMM_TEE
- bool "UEFI variables storage service via OP-TEE"
- depends on OPTEE
+ bool "UEFI variables storage service via the trusted world"
+ depends on OPTEE || ARM_FFA_TRANSPORT
help
+ Allowing access to the MM SP services (SPs such as StandAlonneMM, smm-gateway).
+ When using the u-boot OP-TEE driver, StandAlonneMM is supported.
+ When using the u-boot FF-A driver any MM SP is supported.
+
If OP-TEE is present and running StandAloneMM, dispatch all UEFI
variable related operations to that. The application will verify,
authenticate and store the variables on an RPMB.
+ When ARM_FFA_TRANSPORT is used, dispatch all UEFI variable related
+ operations to the MM SP running in the secure world.
+ A door bell mechanism is used to notify the SP when there is data in the shared
+ MM buffer. The data is copied by u-boot to the shared buffer before issuing
+ the door bell event.
+
config EFI_VARIABLE_NO_STORE
bool "Don't persist non-volatile UEFI variables"
help
diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
index d404343a7d..8a397ea21b 100644
--- a/lib/efi_loader/efi_boottime.c
+++ b/lib/efi_loader/efi_boottime.c
@@ -2193,6 +2193,13 @@ static efi_status_t EFIAPI efi_exit_boot_services(efi_handle_t image_handle,
debug("[efi_boottime][INFO]: FF-A RX/TX buffers unmapped\n");
#endif
+#if CONFIG_IS_ENABLED(ARM_FFA_EFI_RUNTIME_MODE) && !CONFIG_IS_ENABLED(SANDBOX_FFA)
+ if (ffa_copy_runtime_data())
+ printf("ERROR: EFI: FFA: copying runtime data\n");
+ else
+ printf("INFO: EFI: FFA: runtime data copied\n");
+#endif
+
/* Patch out unsupported runtime function */
efi_runtime_detach();
diff --git a/lib/efi_loader/efi_variable_tee.c b/lib/efi_loader/efi_variable_tee.c
index dfef18435d..d6f24f85bd 100644
--- a/lib/efi_loader/efi_variable_tee.c
+++ b/lib/efi_loader/efi_variable_tee.c
@@ -4,6 +4,8 @@
*
* Copyright (C) 2019 Linaro Ltd. <sughosh.ganu at linaro.org>
* Copyright (C) 2019 Linaro Ltd. <ilias.apalodimas at linaro.org>
+ * Copyright (C) 2022 ARM Limited
+ * Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
*/
#include <common.h>
@@ -15,6 +17,36 @@
#include <malloc.h>
#include <mm_communication.h>
+#if (IS_ENABLED(CONFIG_ARM_FFA_TRANSPORT))
+
+#include <arm_ffa.h>
+#include <cpu_func.h>
+#include <mapmem.h>
+
+#ifndef FFA_SHARED_MM_BUFFER_SIZE
+#warning "FFA_SHARED_MM_BUFFER_SIZE must be defined in include/configs/<board>.h"
+#define FFA_SHARED_MM_BUFFER_SIZE 0
+#endif
+
+#ifndef FFA_SHARED_MM_BUFFER_OFFSET
+#warning "FFA_SHARED_MM_BUFFER_OFFSET must be defined in include/configs/<board>.h"
+#define FFA_SHARED_MM_BUFFER_OFFSET 0
+#endif
+
+#ifndef FFA_SHARED_MM_BUFFER_ADDR
+#warning "FFA_SHARED_MM_BUFFER_ADDR must be defined in include/configs/<board>.h"
+#define FFA_SHARED_MM_BUFFER_ADDR 0
+#endif
+
+/* MM return codes */
+#define MM_SUCCESS (0)
+
+const char *mm_sp_svc_uuid = MM_SP_UUID;
+
+static __efi_runtime_data u16 mm_sp_id;
+
+#endif
+
extern struct efi_var_file __efi_runtime_data *efi_var_buf;
static efi_uintn_t max_buffer_size; /* comm + var + func + data */
static efi_uintn_t max_payload_size; /* func + data */
@@ -24,6 +56,7 @@ struct mm_connection {
u32 session;
};
+#if (IS_ENABLED(CONFIG_OPTEE))
/**
* get_connection() - Retrieve OP-TEE session for a specific UUID.
*
@@ -143,16 +176,227 @@ static efi_status_t optee_mm_communicate(void *comm_buf, ulong dsize)
return ret;
}
+#endif
+
+#if (IS_ENABLED(CONFIG_ARM_FFA_TRANSPORT))
/**
- * mm_communicate() - Adjust the cmonnucation buffer to StandAlonneMM and send
+ * ffa_notify_mm_sp() - Announce there is data in the shared buffer
+ *
+ * Notifies the MM partition in the trusted world that
+ * data is available in the shared buffer.
+ * This is a blocking call during which trusted world has exclusive access
+ * to the MM shared buffer.
+ *
+ * Return:
+ *
+ * 0 on success
+ */
+static int __efi_runtime ffa_notify_mm_sp(void)
+{
+ struct ffa_send_direct_data msg = {0};
+ int ret;
+ int sp_event_ret = -1;
+
+ if (!ffa_bus_ops_get())
+ return -EINVAL;
+
+ msg.data0 = FFA_SHARED_MM_BUFFER_OFFSET; /* x3 */
+
+ ret = ffa_bus_ops_get()->sync_send_receive(mm_sp_id, &msg);
+ if (ret != 0)
+ return ret;
+
+ sp_event_ret = msg.data0; /* x3 */
+
+ if (sp_event_ret == MM_SUCCESS)
+ return 0;
+
+ /*
+ * Failure to notify the MM SP
+ */
+
+ return -EACCES;
+}
+
+/**
+ * ffa_discover_mm_sp_id() - Query the MM partition ID
+ *
+ * Use the FF-A driver to get the MM partition ID.
+ * If multiple partitions are found, use the first one.
+ * This is a boot time function.
+ *
+ * Return:
+ *
+ * 0 on success
+ */
+static int ffa_discover_mm_sp_id(void)
+{
+ u32 count = 0, size = 0;
+ int ret;
+ struct ffa_partition_info *parts_info;
+
+ if (!ffa_bus_ops_get())
+ return -EINVAL;
+
+ /*
+ * get from the driver the count of the SPs matching the UUID
+ */
+ ret = ffa_bus_ops_get()->partition_info_get(mm_sp_svc_uuid, &count, NULL);
+ if (ret != 0) {
+ log_err("EFI: Failure in querying partitions count (error code: %d)\n", ret);
+ return ret;
+ }
+
+ if (!count) {
+ log_info("EFI: No MM partition found\n");
+ return ret;
+ }
+
+ /*
+ * pre-allocate a buffer to be filled by the driver
+ * with ffa_partition_info structs
+ */
+
+ log_info("EFI: Pre-allocating %d partition(s) info structures\n", count);
+
+ parts_info = calloc(count, sizeof(struct ffa_partition_info));
+ if (!parts_info)
+ return -EINVAL;
+
+ size = count * sizeof(struct ffa_partition_info);
+
+ /*
+ * ask the driver to fill the
+ * buffer with the SPs info
+ */
+ ret = ffa_bus_ops_get()->partition_info_get(mm_sp_svc_uuid, &size, parts_info);
+ if (ret != 0) {
+ log_err("EFI: Failure in querying partition(s) info (error code: %d)\n", ret);
+ free(parts_info);
+ return ret;
+ }
+
+ /*
+ * MM SPs found , use the first one
+ */
+
+ mm_sp_id = parts_info[0].id;
+
+ log_info("EFI: MM partition ID 0x%x\n", mm_sp_id);
+
+ free(parts_info);
+
+ return 0;
+}
+
+/**
+ * ffa_mm_communicate() - Exchange EFI services data with the MM partition using FF-A
+ * @comm_buf: locally allocated communication buffer used for rx/tx
+ * @dsize: communication buffer size
+ *
+ * Issues a door bell event to notify the MM partition (SP) running in OP-TEE
+ * that there is data to read from the shared buffer.
+ * Communication with the MM SP is performed using FF-A transport.
+ * On the event, MM SP can read the data from the buffer and
+ * update the MM shared buffer with response data.
+ * The response data is copied back to the communication buffer.
+ *
+ * Return:
+ *
+ * EFI status code
+ */
+static efi_status_t __efi_runtime ffa_mm_communicate(void *comm_buf, ulong comm_buf_size)
+{
+ ulong tx_data_size;
+ int ffa_ret;
+ struct efi_mm_communicate_header *mm_hdr;
+ void *virt_shared_buf;
+
+ if (!comm_buf)
+ return EFI_INVALID_PARAMETER;
+
+ /* Discover MM partition ID at boot time */
+ if (!mm_sp_id && ffa_discover_mm_sp_id() != 0) {
+ log_err("EFI: Failure to discover MM partition ID at boot time\n");
+ return EFI_UNSUPPORTED;
+ }
+
+ mm_hdr = (struct efi_mm_communicate_header *)comm_buf;
+ tx_data_size = mm_hdr->message_len + sizeof(efi_guid_t) + sizeof(size_t);
+
+ if (comm_buf_size != tx_data_size || tx_data_size > FFA_SHARED_MM_BUFFER_SIZE)
+ return EFI_INVALID_PARAMETER;
+
+ /* Copy the data to the shared buffer */
+
+ virt_shared_buf = (void *)map_sysmem((phys_addr_t)FFA_SHARED_MM_BUFFER_ADDR, 0);
+ efi_memcpy_runtime(virt_shared_buf, comm_buf, tx_data_size);
+
+ /*
+ * The secure world might have cache disabled for
+ * the device region used for shared buffer (which is the case for Optee).
+ * In this case, the secure world reads the data from DRAM.
+ * Let's flush the cache so the DRAM is updated with the latest data.
+ */
+ #ifdef CONFIG_ARM64
+ invalidate_dcache_all();
+ #endif
+
+ /* Announce there is data in the shared buffer */
+
+ ffa_ret = ffa_notify_mm_sp();
+ if (ffa_ret)
+ unmap_sysmem(virt_shared_buf);
+
+ switch (ffa_ret) {
+ case 0:
+ {
+ ulong rx_data_size;
+ /* Copy the MM SP response from the shared buffer to the communication buffer */
+ rx_data_size = ((struct efi_mm_communicate_header *)virt_shared_buf)->message_len +
+ sizeof(efi_guid_t) +
+ sizeof(size_t);
+
+ if (rx_data_size > comm_buf_size) {
+ unmap_sysmem(virt_shared_buf);
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ efi_memcpy_runtime(comm_buf, virt_shared_buf, rx_data_size);
+ unmap_sysmem(virt_shared_buf);
+
+ return EFI_SUCCESS;
+ }
+ case -EINVAL:
+ return EFI_DEVICE_ERROR;
+ case -EPERM:
+ return EFI_INVALID_PARAMETER;
+ case -EACCES:
+ return EFI_ACCESS_DENIED;
+ case -EBUSY:
+ return EFI_OUT_OF_RESOURCES;
+ default:
+ return EFI_ACCESS_DENIED;
+ }
+}
+#endif
+
+/**
+ * mm_communicate() - Adjust the communication buffer to the MM SP and send
* it to OP-TEE
*
- * @comm_buf: locally allocted communcation buffer
+ * @comm_buf: locally allocated communication buffer
* @dsize: buffer size
+ *
+ * The MM SP (also called partition) can be StandAlonneMM or smm-gateway.
+ * The comm_buf format is the same for both partitions.
+ * When using the u-boot OP-TEE driver, StandAlonneMM is supported.
+ * When using the u-boot FF-A driver, StandAlonneMM and smm-gateway are supported.
+ *
* Return: status code
*/
-static efi_status_t mm_communicate(u8 *comm_buf, efi_uintn_t dsize)
+static efi_status_t __efi_runtime mm_communicate(u8 *comm_buf, efi_uintn_t dsize)
{
efi_status_t ret;
struct efi_mm_communicate_header *mm_hdr;
@@ -162,7 +406,11 @@ static efi_status_t mm_communicate(u8 *comm_buf, efi_uintn_t dsize)
mm_hdr = (struct efi_mm_communicate_header *)comm_buf;
var_hdr = (struct smm_variable_communicate_header *)mm_hdr->data;
+ #if (IS_ENABLED(CONFIG_OPTEE))
ret = optee_mm_communicate(comm_buf, dsize);
+ #elif (IS_ENABLED(CONFIG_ARM_FFA_TRANSPORT))
+ ret = ffa_mm_communicate(comm_buf, dsize);
+ #endif
if (ret != EFI_SUCCESS) {
log_err("%s failed!\n", __func__);
return ret;
@@ -258,6 +506,13 @@ efi_status_t EFIAPI get_max_payload(efi_uintn_t *size)
goto out;
}
*size = var_payload->size;
+
+ #if (IS_ENABLED(CONFIG_ARM_FFA_TRANSPORT))
+ if (*size > FFA_SHARED_MM_BUFFER_SIZE)
+ *size = FFA_SHARED_MM_BUFFER_SIZE - MM_COMMUNICATE_HEADER_SIZE -
+ MM_VARIABLE_COMMUNICATE_SIZE;
+ #endif
+
/*
* There seems to be a bug in EDK2 miscalculating the boundaries and
* size checks, so deduct 2 more bytes to fulfill this requirement. Fix
@@ -697,7 +952,7 @@ void efi_variables_boot_exit_notify(void)
ret = EFI_NOT_FOUND;
if (ret != EFI_SUCCESS)
- log_err("Unable to notify StMM for ExitBootServices\n");
+ log_err("Unable to notify the MM partition for ExitBootServices\n");
free(comm_buf);
/*
--
2.17.1
More information about the U-Boot
mailing list