[PATCH v2 1/7] configs: stm32f746-disco: Fix SPL boot

[Patrice CHOTARD]

On 9/26/22 14:50, Patrick DELAUNAY wrote:
> Hi,
> 
> On 9/20/22 18:04, Patrice Chotard wrote:
>> Commit 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
>> replaces CONFIG_SYS_FDT_BASE by CONFIG_SYS_SPL_ARGS_ADDR.
>> As CONFIG_SYS_SPL_ARGS_ADDR enables additional code when enable, it
>> increases SPL size over the initial 0x8000 limit.
>> Increase the SPL size to 0x9000 to fix SPL boot.
>> Set SPL_SIZE_LIMIT to 0x9000 to avoid similar issue in the future.
>>
>> Fixes 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
>> ---
>>
>> (no changes since v1)
>>
>>   configs/stm32f746-disco_spl_defconfig | 7 ++++---
>>   1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig
>> index e7b1acc433..5e8a8aaf3c 100644
>> --- a/configs/stm32f746-disco_spl_defconfig
>> +++ b/configs/stm32f746-disco_spl_defconfig
>> @@ -1,6 +1,6 @@
>>   CONFIG_ARM=y
>>   CONFIG_ARCH_STM32=y
>> -CONFIG_SYS_TEXT_BASE=0x08008000
>> +CONFIG_SYS_TEXT_BASE=0x08009000
>>   CONFIG_SYS_MALLOC_LEN=0x100000
>>   CONFIG_SYS_MALLOC_F_LEN=0xE00
>>   CONFIG_SPL_GPIO=y
>> @@ -13,10 +13,11 @@ CONFIG_SPL_TEXT_BASE=0x8000000
>>   CONFIG_SYS_PROMPT="U-Boot > "
>>   CONFIG_SPL_SERIAL=y
>>   CONFIG_SPL_DRIVERS_MISC=y
>> +CONFIG_SPL_SIZE_LIMIT=0x9000
>>   CONFIG_STM32F7=y
>>   CONFIG_TARGET_STM32F746_DISCO=y
>>   CONFIG_SPL=y
>> -CONFIG_SYS_LOAD_ADDR=0x8008000
>> +CONFIG_SYS_LOAD_ADDR=0x8009000
>>   CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
>>   CONFIG_DISTRO_DEFAULTS=y
>>   CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>> @@ -29,7 +30,7 @@ CONFIG_USE_BOOTARGS=y
>>   CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
>>   # CONFIG_DISPLAY_CPUINFO is not set
>>   CONFIG_BOARD_LATE_INIT=y
>> -CONFIG_SPL_PAD_TO=0x8000
>> +CONFIG_SPL_PAD_TO=0x9000
>>   CONFIG_SPL_NO_BSS_LIMIT=y
>>   CONFIG_SPL_BOARD_INIT=y
>>   CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> 
> 
> 
> Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> 
> Thanks
> Patrick
> 
Applied to u-boot-stm32/next

Thanks