[PATCH 4/4] clk-imx8mm: Only build QSPI clocks when CONFIG_NXP_FSPI=y
Fabio Estevam
festevam at denx.de
Mon Sep 26 18:40:11 CEST 2022
The QSPI clocks are only used when CONFIG_NXP_FSPI=y, so only build the
QSPI clocks in this case to reduce the final SPL binary size.
Signed-off-by: Fabio Estevam <festevam at denx.de>
---
drivers/clk/imx/clk-imx8mm.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index b6a289b01d..b5c253e496 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -86,8 +86,10 @@ static const char *imx8mm_wdog_sels[] = {"clock-osc-24m", "sys_pll1_133m", "sys_
static const char *imx8mm_usdhc3_sels[] = {"clock-osc-24m", "sys_pll1_400m", "sys_pll1_800m", "sys_pll2_500m",
"sys_pll3_out", "sys_pll1_266m", "audio_pll2_clk", "sys_pll1_100m", };
+#if CONFIG_IS_ENABLED(NXP_FSPI)
static const char *imx8mm_qspi_sels[] = {"clock-osc-24m", "sys_pll1_400m", "sys_pll2_333m", "sys_pll2_500m",
"audio_pll2_out", "sys_pll1_266m", "sys_pll3_out", "sys_pll1_100m", };
+#endif
static const char *imx8mm_usb_core_sels[] = {"clock-osc-24m", "sys_pll1_100m", "sys_pll1_40m", "sys_pll2_100m",
"sys_pll2_200m", "clk_ext2", "clk_ext3", "audio_pll2_out", };
@@ -273,8 +275,6 @@ static int imx8mm_clk_probe(struct udevice *dev)
clk_dm(IMX8MM_CLK_USDHC3,
imx8m_clk_composite("usdhc3", imx8mm_usdhc3_sels,
base + 0xbc80));
- clk_dm(IMX8MM_CLK_QSPI,
- imx8m_clk_composite("qspi", imx8mm_qspi_sels, base + 0xab80));
clk_dm(IMX8MM_CLK_USB_CORE_REF,
imx8m_clk_composite("usb_core_ref", imx8mm_usb_core_sels, base + 0xb100));
clk_dm(IMX8MM_CLK_USB_PHY_REF,
@@ -301,8 +301,6 @@ static int imx8mm_clk_probe(struct udevice *dev)
imx_clk_gate4("wdog3_root_clk", "wdog", base + 0x4550, 0));
clk_dm(IMX8MM_CLK_USDHC3_ROOT,
imx_clk_gate4("usdhc3_root_clk", "usdhc3", base + 0x45e0, 0));
- clk_dm(IMX8MM_CLK_QSPI_ROOT,
- imx_clk_gate4("qspi_root_clk", "qspi", base + 0x42f0, 0));
clk_dm(IMX8MM_CLK_USB1_CTRL_ROOT,
imx_clk_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0));
@@ -357,6 +355,13 @@ static int imx8mm_clk_probe(struct udevice *dev)
imx_clk_gate4("ecspi3_root_clk", "ecspi3", base + 0x4090, 0));
#endif
+#if CONFIG_IS_ENABLED(NXP_FSPI)
+ clk_dm(IMX8MM_CLK_QSPI,
+ imx8m_clk_composite("qspi", imx8mm_qspi_sels, base + 0xab80));
+ clk_dm(IMX8MM_CLK_QSPI_ROOT,
+ imx_clk_gate4("qspi_root_clk", "qspi", base + 0x42f0, 0));
+#endif
+
return 0;
}
--
2.25.1
More information about the U-Boot
mailing list