[PATCH v3 4/5] drivers: power: pmic: Enable use of rn5t567 PMIC in SPL

[Simon Glass]

On Thu, 29 Sept 2022 at 10:09, Martyn Welch
<martyn.welch at collabora.co.uk> wrote:
>
> Hi Simon,
>
> Is this approach acceptable to you (instead of adding legacy support
> for this device)?

Reviewed-by: Simon Glass <sjg at chromium.org>


>
> Martyn
>
> On Fri, 2022-09-16 at 11:24 +0100, Martyn Welch wrote:
> > The support added later in this series tweaks the PMIC voltages in
> > the
> > SPL. Enable support for the rn5t567 in SPL builds to allow this to be
> > done
> > cleanly.
> >
> > Signed-off-by: Martyn Welch <martyn.welch at collabora.co.uk>
> > ---
> >
> > Changes in v3:
> >  - New patch (replaces addition of legacy support for rn5t567)
> >
> >  drivers/power/pmic/Kconfig  | 8 ++++++++
> >  drivers/power/pmic/Makefile | 2 +-
> >  2 files changed, 9 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
> > index 66b16b06e0..8e10ecae2e 100644
> > --- a/drivers/power/pmic/Kconfig
> > +++ b/drivers/power/pmic/Kconfig
> > @@ -300,6 +300,14 @@ config PMIC_RN5T567
> >         regulators Real-Time Clock and 4 GPIOs. This driver provides
> >         register access only.
> >
> > +config SPL_PMIC_RN5T567
> > +       bool "Enable driver for Ricoh RN5T567 PMIC in SPL"
> > +       depends on SPL_DM_PMIC
> > +       ---help---
> > +       The RN5T567 is a PMIC with 4 step-down DC/DC converters, 5
> > LDO
> > +       regulators Real-Time Clock and 4 GPIOs. This driver provides
> > +       register access only.
> > +
> >  config PMIC_TPS65090
> >         bool "Enable driver for Texas Instruments TPS65090 PMIC"
> >         ---help---
> > diff --git a/drivers/power/pmic/Makefile
> > b/drivers/power/pmic/Makefile
> > index f73b326255..ae34e6b33e 100644
> > --- a/drivers/power/pmic/Makefile
> > +++ b/drivers/power/pmic/Makefile
> > @@ -22,7 +22,7 @@ obj-$(CONFIG_$(SPL_)PMIC_AXP) += axp.o
> >  obj-$(CONFIG_PMIC_MAX8997) += max8997.o
> >  obj-$(CONFIG_PMIC_PM8916) += pm8916.o
> >  obj-$(CONFIG_$(SPL_TPL_)PMIC_RK8XX) += rk8xx.o
> > -obj-$(CONFIG_PMIC_RN5T567) += rn5t567.o
> > +obj-$(CONFIG_$(SPL_)PMIC_RN5T567) += rn5t567.o
> >  obj-$(CONFIG_PMIC_TPS65090) += tps65090.o
> >  obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o
> >  obj-$(CONFIG_DM_PMIC_TPS65910) += pmic_tps65910_dm.o
>