[PATCH v11 05/15] stm32mp1: dk2: Add image information for capsule updates

Etienne Carriere etienne.carriere at linaro.org
Fri Sep 30 07:51:19 CEST 2022


On Wed, 28 Sept 2022 at 11:30, Sughosh Ganu <sughosh.ganu at linaro.org> wrote:
>
> Enabling capsule update functionality on the platform requires
> populating information on the images that are to be updated using the
> functionality. Do so for the DK2 board.
>
> Signed-off-by: Sughosh Ganu <sughosh.ganu at linaro.org>
> Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> Reviewed-by: Ilias Apalodimas <ilias.apalodimas at linaro.org>
> ---

Reviewed-by: Etienne Carriere <etienne.carriere at linaro.org> with 1 comment:

Could the commit header line be updated? the patch no more targets
only DK2 among stm32mp1 platforms:
- stm32mp1: dk2: Add image information for capsule updates
+stm32mp1: Add image information for capsule updates

Regards,
Etienne


> Changes since V10:
> * Use image_index value of 1 for the FIP image as it is now relevant
>
>  board/st/stm32mp1/stm32mp1.c       | 18 ++++++++++++++++++
>  include/configs/stm32mp15_common.h |  4 ++++
>  2 files changed, 22 insertions(+)
>
> diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
> index 8c162b42a5..e43dab018f 100644
> --- a/board/st/stm32mp1/stm32mp1.c
> +++ b/board/st/stm32mp1/stm32mp1.c
> @@ -11,6 +11,7 @@
>  #include <clk.h>
>  #include <config.h>
>  #include <dm.h>
> +#include <efi_loader.h>
>  #include <env.h>
>  #include <env_internal.h>
>  #include <fdt_simplefb.h>
> @@ -87,6 +88,16 @@
>  #define USB_START_LOW_THRESHOLD_UV     1230000
>  #define USB_START_HIGH_THRESHOLD_UV    2150000
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +struct efi_fw_image fw_images[1];
> +
> +struct efi_capsule_update_info update_info = {
> +       .images = fw_images,
> +};
> +
> +u8 num_image_type_guids = ARRAY_SIZE(fw_images);
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
>  int board_early_init_f(void)
>  {
>         /* nothing to do, only used in SPL */
> @@ -666,6 +677,13 @@ int board_init(void)
>
>         setup_led(LEDST_ON);
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +       efi_guid_t image_type_guid = STM32MP_FIP_IMAGE_GUID;
> +
> +       guidcpy(&fw_images[0].image_type_id, &image_type_guid);
> +       fw_images[0].fw_name = u"STM32MP-FIP";
> +       fw_images[0].image_index = 1;
> +#endif
>         return 0;
>  }
>
> diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h
> index c5412ffeb3..bb19dae945 100644
> --- a/include/configs/stm32mp15_common.h
> +++ b/include/configs/stm32mp15_common.h
> @@ -34,6 +34,10 @@
>  #define CONFIG_SERVERIP                 192.168.1.1
>  #endif
>
> +#define STM32MP_FIP_IMAGE_GUID \
> +       EFI_GUID(0x19d5df83, 0x11b0, 0x457b, 0xbe, 0x2c, \
> +                0x75, 0x59, 0xc1, 0x31, 0x42, 0xa5)
> +
>  /*****************************************************************************/
>  #ifdef CONFIG_DISTRO_DEFAULTS
>  /*****************************************************************************/
> --
> 2.34.1
>


More information about the U-Boot mailing list