[RFC PATCH v1 2/3] nvme: pci: Enable for SPL

Mayuresh Chitale mchitale at ventanamicro.com
Fri Sep 30 18:58:14 CEST 2022


Hi Simon,

On Fri, Sep 30, 2022 at 5:26 AM Simon Glass <sjg at chromium.org> wrote:

> Hi Mayuresh,
>
> On Thu, 29 Sept 2022 at 03:57, Mayuresh Chitale
> <mchitale at ventanamicro.com> wrote:
> >
> > Build PCI NVMe driver when enabled for SPI and enable dm-pre-reloc for
> > the driver. Also enable PCI_PNP for SPL which is required to auto
> > configure the PCIe devices.
> >
> > Signed-off-by: Mayuresh Chitale <mchitale at ventanamicro.com>
> > ---
> >  drivers/Makefile         | 2 +-
> >  drivers/nvme/Makefile    | 2 +-
> >  drivers/nvme/nvme_pci.c  | 1 +
> >  drivers/pci/Kconfig      | 7 +++++++
> >  drivers/pci/pci-uclass.c | 3 ++-
> >  5 files changed, 12 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/Makefile b/drivers/Makefile
> > index eba9940231..581ae9f819 100644
> > --- a/drivers/Makefile
> > +++ b/drivers/Makefile
> > @@ -34,6 +34,7 @@ obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
> >  obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
> >  obj-$(CONFIG_$(SPL_)SYSINFO) += sysinfo/
> >  obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/
> > +obj-$(CONFIG_$(SPL_)NVME) += nvme/
> >  obj-$(CONFIG_XEN) += xen/
> >  obj-$(CONFIG_$(SPL_)FPGA) += fpga/
> >
> > @@ -86,7 +87,6 @@ obj-y += crypto/
> >  obj-$(CONFIG_FASTBOOT) += fastboot/
> >  obj-y += misc/
> >  obj-$(CONFIG_MMC) += mmc/
> > -obj-$(CONFIG_NVME) += nvme/
> >  obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/
> >  obj-y += dfu/
> >  obj-$(CONFIG_PCH) += pch/
> > diff --git a/drivers/nvme/Makefile b/drivers/nvme/Makefile
> > index fa7b619446..fd3e68a91d 100644
> > --- a/drivers/nvme/Makefile
> > +++ b/drivers/nvme/Makefile
> > @@ -4,4 +4,4 @@
> >
> >  obj-y += nvme-uclass.o nvme.o nvme_show.o
> >  obj-$(CONFIG_NVME_APPLE) += nvme_apple.o
> > -obj-$(CONFIG_NVME_PCI) += nvme_pci.o
> > +obj-$(CONFIG_$(SPL_)NVME_PCI) += nvme_pci.o
> > diff --git a/drivers/nvme/nvme_pci.c b/drivers/nvme/nvme_pci.c
> > index 36bf9c5ffb..16d8b9fff7 100644
> > --- a/drivers/nvme/nvme_pci.c
> > +++ b/drivers/nvme/nvme_pci.c
> > @@ -39,6 +39,7 @@ U_BOOT_DRIVER(nvme) = {
> >         .bind   = nvme_bind,
> >         .probe  = nvme_probe,
> >         .priv_auto      = sizeof(struct nvme_dev),
> > +       .flags  = DM_FLAG_PRE_RELOC,
>
> Why is this here? It is only applicable on some boards.
>
> Instead, add the appropriate tag (e.g. u-boot,dm-spl) to the device node.
>

I am not sure how that can be done for PCI devices as those would be probed
at run time. Could you please point to any examples? Also,
the pci_find_and_bind_driver function only checks for this flag in the
drivers when binding the devices

>
> >  };
> >
> >  struct pci_device_id nvme_supported[] = {
> > diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
> > index 22f4995453..2d4c9f0781 100644
> > --- a/drivers/pci/Kconfig
> > +++ b/drivers/pci/Kconfig
> > @@ -40,6 +40,13 @@ config PCI_PNP
> >         help
> >           Enable PCI memory and I/O space resource allocation and
> assignment.
> >
> > +config SPL_PCI_PNP
> > +       bool "Enable Plug & Play support for PCI"
> > +       default n
> > +       help
> > +         Enable PCI memory and I/O space resource allocation and
> assignment.
> > +         This is required to auto configure the enumerated devices.
> > +
> >  config PCI_REGION_MULTI_ENTRY
> >         bool "Enable Multiple entries of region type MEMORY in ranges
> for PCI"
> >         help
> > diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c
> > index 16a6a699f9..62d2409a6d 100644
> > --- a/drivers/pci/pci-uclass.c
> > +++ b/drivers/pci/pci-uclass.c
> > @@ -1140,7 +1140,8 @@ static int pci_uclass_post_probe(struct udevice
> *bus)
> >         if (ret)
> >                 return log_msg_ret("bind", ret);
> >
> > -       if (CONFIG_IS_ENABLED(PCI_PNP) && ll_boot_init() &&
> > +       if ((CONFIG_IS_ENABLED(PCI_PNP) ||
> CONFIG_IS_ENABLED(SPL_PCI_PNP)) &&
> > +           ll_boot_init() &&
> >             (!hose->skip_auto_config_until_reloc ||
> >              (gd->flags & GD_FLG_RELOC))) {
> >                 ret = pci_auto_config_devices(bus);
> > --
> > 2.25.1
> >
>
> Regards,
> Simon
>


More information about the U-Boot mailing list