[PATCH] spi: stm32_qspi: Remove useless struct stm32_qspi_flash

[Patrice Chotard]

Currently, in stm32_qspi_claim_bus(), QSPI_CR and QSPI_DCR registers
are saved in stm32_ospi_flash struct on first flash memory initialization
and restored on each flash accesses.

As the logic of spi-uclass.c changed since 'commit 741280e9accd
("spi: spi-uclass: Fix spi_claim_bus() speed/mode setup logic")'
set_speed() and set_mode() callbacks are called systematically when bus
speed or bus mode need to be updated, QSPI_CR and QSPI_DCR registers are
set accordingly.

So stm32_qspi_claim_bus() can be updated by removing QSPI_CR and QSPI_DCR
save/restore code and struct stm32_ospi_flash can be removed as well.

Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
---

 drivers/spi/stm32_qspi.c | 27 +++------------------------
 1 file changed, 3 insertions(+), 24 deletions(-)

diff --git a/drivers/spi/stm32_qspi.c b/drivers/spi/stm32_qspi.c
index 90c207d5184..eb52ff73b23 100644
--- a/drivers/spi/stm32_qspi.c
+++ b/drivers/spi/stm32_qspi.c
@@ -115,15 +115,8 @@ struct stm32_qspi_regs {
 #define STM32_BUSY_TIMEOUT_US		100000
 #define STM32_ABT_TIMEOUT_US		100000
 
-struct stm32_qspi_flash {
-	u32 cr;
-	u32 dcr;
-	bool initialized;
-};
-
 struct stm32_qspi_priv {
 	struct stm32_qspi_regs *regs;
-	struct stm32_qspi_flash flash[STM32_QSPI_MAX_CHIP];
 	void __iomem *mm_base;
 	resource_size_t mm_size;
 	ulong clock_rate;
@@ -407,25 +400,11 @@ static int stm32_qspi_claim_bus(struct udevice *dev)
 		return -ENODEV;
 
 	if (priv->cs_used != slave_cs) {
-		struct stm32_qspi_flash *flash = &priv->flash[slave_cs];
-
 		priv->cs_used = slave_cs;
 
-		if (flash->initialized) {
-			/* Set the configuration: speed + cs */
-			writel(flash->cr, &priv->regs->cr);
-			writel(flash->dcr, &priv->regs->dcr);
-		} else {
-			/* Set chip select */
-			clrsetbits_le32(&priv->regs->cr, STM32_QSPI_CR_FSEL,
-					priv->cs_used ? STM32_QSPI_CR_FSEL : 0);
-
-			/* Save the configuration: speed + cs */
-			flash->cr = readl(&priv->regs->cr);
-			flash->dcr = readl(&priv->regs->dcr);
-
-			flash->initialized = true;
-		}
+		/* Set chip select */
+		clrsetbits_le32(&priv->regs->cr, STM32_QSPI_CR_FSEL,
+				priv->cs_used ? STM32_QSPI_CR_FSEL : 0);
 	}
 
 	setbits_le32(&priv->regs->cr, STM32_QSPI_CR_EN);
-- 
2.25.1