[PATCH v2 0/5] enable DMA and CPSW nodes for am62ax SoC family

[Ravi Gunasekaran]

Bryan,

On 03/04/23 3:06 am, Bryan Brattlof wrote:
> Hello again everyone!
> 
> This patch series syncs TI's am62ax device tree files with what has been
> merged in the v6.3-rc4 of the Linux Kernel. This series will also enable
> YMODEM support to make automated testing (which uses the UART boot
> method to load the bootloaders)
> 
> Thanks for reviewing
> ~Bryan
> 
> Changed from v1: [0]
> 
> o Rebased on top of -next branch
> o dropped 'u-boot,dm-spl' for the new 'bootph-pre-ram' properties
> 
> [0] https://lore.kernel.org/u-boot/20230327184035.2128786-1-bb@ti.com/
> 
> Bryan Brattlof (4):
>   arm: dts: sync am62ax dtbs with linux v6.3-rc4
>   arm: dts: add DMA and CPSW nodes for uboot
>   configs: enable net features for am62ax
>   configs: am62ax: enable ymodem support for a53 spl
> 
> Vignesh Raghavendra (1):
>   dma: ti: k3-udma: Introduce DMA support for the am62ax
> 
>  arch/arm/dts/k3-am62a-main.dtsi       | 365 ++++++++++++++++++++++++++
>  arch/arm/dts/k3-am62a-mcu.dtsi        |  51 ++++
>  arch/arm/dts/k3-am62a-wakeup.dtsi     |   2 +-
>  arch/arm/dts/k3-am62a7-r5-sk.dts      |   8 +
>  arch/arm/dts/k3-am62a7-sk-u-boot.dtsi |  26 +-
>  arch/arm/dts/k3-am62a7-sk.dts         |  70 +++++
>  arch/arm/dts/k3-am62a7.dtsi           |   1 +
>  configs/am62ax_evm_a53_defconfig      |   7 +-
>  drivers/dma/ti/Makefile               |   1 +
>  drivers/dma/ti/k3-psil-am62a.c        | 196 ++++++++++++++
>  drivers/dma/ti/k3-psil-priv.h         |   1 +
>  drivers/dma/ti/k3-psil.c              |   2 +
>  12 files changed, 727 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/dma/ti/k3-psil-am62a.c
> 
> 
> base-commit: 942ac73afc37fb98695af4489ea1549c21615a5e

Acked-by: Ravi Gunasekaran <r-gunasekaran at ti.com>

-- 
Regards,
Ravi