[PATCH v2 11/12] arm: mach-k3: Move J721s2 SPL init functions to mach-k3

[Andrew Davis]

This matches AM64 and J721e and removes the need to forward
declare k3_spl_init(), k3_mem_init(), and check_rom_loaded_sysfw()
in sys_proto.h.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 arch/arm/mach-k3/include/mach/sys_proto.h |  3 --
 arch/arm/mach-k3/j721s2_init.c            | 64 +++++++++++++++++++++++
 board/ti/j721s2/evm.c                     | 63 ----------------------
 3 files changed, 64 insertions(+), 66 deletions(-)

diff --git a/arch/arm/mach-k3/include/mach/sys_proto.h b/arch/arm/mach-k3/include/mach/sys_proto.h
index 4b4e2a5be39..5638c6f8c8a 100644
--- a/arch/arm/mach-k3/include/mach/sys_proto.h
+++ b/arch/arm/mach-k3/include/mach/sys_proto.h
@@ -7,7 +7,4 @@
 #ifndef _SYS_PROTO_H_
 #define _SYS_PROTO_H_
 
-void k3_spl_init(void);
-void k3_mem_init(void);
-bool check_rom_loaded_sysfw(void);
 #endif
diff --git a/arch/arm/mach-k3/j721s2_init.c b/arch/arm/mach-k3/j721s2_init.c
index 4785a747bf3..175ac4028a0 100644
--- a/arch/arm/mach-k3/j721s2_init.c
+++ b/arch/arm/mach-k3/j721s2_init.c
@@ -19,6 +19,7 @@
 #include <dm.h>
 #include <dm/uclass-internal.h>
 #include <dm/pinctrl.h>
+#include <dm/root.h>
 #include <mmc.h>
 #include <remoteproc.h>
 
@@ -182,6 +183,69 @@ void k3_mem_init(void)
 	spl_enable_dcache();
 }
 
+/* Support for the various EVM / SK families */
+#if defined(CONFIG_SPL_OF_LIST) && defined(CONFIG_TI_I2C_BOARD_DETECT)
+void do_dt_magic(void)
+{
+	int ret, rescan, mmc_dev = -1;
+	static struct mmc *mmc;
+
+	do_board_detect();
+
+	/*
+	 * Board detection has been done.
+	 * Let us see if another dtb wouldn't be a better match
+	 * for our board
+	 */
+	if (IS_ENABLED(CONFIG_CPU_V7R)) {
+		ret = fdtdec_resetup(&rescan);
+		if (!ret && rescan) {
+			dm_uninit();
+			dm_init_and_scan(true);
+		}
+	}
+
+	/*
+	 * Because of multi DTB configuration, the MMC device has
+	 * to be re-initialized after reconfiguring FDT inorder to
+	 * boot from MMC. Do this when boot mode is MMC and ROM has
+	 * not loaded SYSFW.
+	 */
+	switch (spl_boot_device()) {
+	case BOOT_DEVICE_MMC1:
+		mmc_dev = 0;
+		break;
+	case BOOT_DEVICE_MMC2:
+	case BOOT_DEVICE_MMC2_2:
+		mmc_dev = 1;
+		break;
+	}
+
+	if (mmc_dev > 0 && !check_rom_loaded_sysfw()) {
+		ret = mmc_init_device(mmc_dev);
+		if (!ret) {
+			mmc = find_mmc_device(mmc_dev);
+			if (mmc) {
+				ret = mmc_init(mmc);
+				if (ret)
+					printf("mmc init failed with error: %d\n", ret);
+			}
+		}
+	}
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+	k3_spl_init();
+#if defined(CONFIG_SPL_OF_LIST) && defined(CONFIG_TI_I2C_BOARD_DETECT)
+	do_dt_magic();
+#endif
+	k3_mem_init();
+}
+#endif
+
 u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
 {
 	switch (boot_device) {
diff --git a/board/ti/j721s2/evm.c b/board/ti/j721s2/evm.c
index 9b130c141ac..d3f9a655899 100644
--- a/board/ti/j721s2/evm.c
+++ b/board/ti/j721s2/evm.c
@@ -192,66 +192,3 @@ int board_late_init(void)
 void spl_board_init(void)
 {
 }
-
-/* Support for the various EVM / SK families */
-#if defined(CONFIG_SPL_OF_LIST) && defined(CONFIG_TI_I2C_BOARD_DETECT)
-void do_dt_magic(void)
-{
-	int ret, rescan, mmc_dev = -1;
-	static struct mmc *mmc;
-
-	do_board_detect();
-
-	/*
-	 * Board detection has been done.
-	 * Let us see if another dtb wouldn't be a better match
-	 * for our board
-	 */
-	if (IS_ENABLED(CONFIG_CPU_V7R)) {
-		ret = fdtdec_resetup(&rescan);
-		if (!ret && rescan) {
-			dm_uninit();
-			dm_init_and_scan(true);
-		}
-	}
-
-	/*
-	 * Because of multi DTB configuration, the MMC device has
-	 * to be re-initialized after reconfiguring FDT inorder to
-	 * boot from MMC. Do this when boot mode is MMC and ROM has
-	 * not loaded SYSFW.
-	 */
-	switch (spl_boot_device()) {
-	case BOOT_DEVICE_MMC1:
-		mmc_dev = 0;
-		break;
-	case BOOT_DEVICE_MMC2:
-	case BOOT_DEVICE_MMC2_2:
-		mmc_dev = 1;
-		break;
-	}
-
-	if (mmc_dev > 0 && !check_rom_loaded_sysfw()) {
-		ret = mmc_init_device(mmc_dev);
-		if (!ret) {
-			mmc = find_mmc_device(mmc_dev);
-			if (mmc) {
-				ret = mmc_init(mmc);
-				if (ret)
-					printf("mmc init failed with error: %d\n", ret);
-			}
-		}
-	}
-}
-#endif
-
-#ifdef CONFIG_SPL_BUILD
-void board_init_f(ulong dummy)
-{
-	k3_spl_init();
-#if defined(CONFIG_SPL_OF_LIST) && defined(CONFIG_TI_I2C_BOARD_DETECT)
-	do_dt_magic();
-#endif
-	k3_mem_init();
-}
-#endif
-- 
2.39.2