[PATCH] arm: mach-k3: am642: move do_dt_magic() after sysfw loading

[Christian Gmeiner]

>
> Makes it possible to use e.g mcu_spi0 for custom board detection.
>

gentle ping

> Signed-off-by: Christian Gmeiner <christian.gmeiner at gmail.com>
> ---
>  arch/arm/mach-k3/am642_init.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-k3/am642_init.c b/arch/arm/mach-k3/am642_init.c
> index 96f292ea75..2478ac162b 100644
> --- a/arch/arm/mach-k3/am642_init.c
> +++ b/arch/arm/mach-k3/am642_init.c
> @@ -185,8 +185,6 @@ void board_init_f(ulong dummy)
>
>         preloader_console_init();
>
> -       do_dt_magic();
> -
>  #if defined(CONFIG_K3_LOAD_SYSFW)
>         /*
>          * Process pinctrl for serial3 a.k.a. MAIN UART1 module and continue
> @@ -213,6 +211,8 @@ void board_init_f(ulong dummy)
>         /* Output System Firmware version info */
>         k3_sysfw_print_ver();
>
> +       do_dt_magic();
> +
>  #if defined(CONFIG_ESM_K3)
>         /* Probe/configure ESM0 */
>         ret = uclass_get_device_by_name(UCLASS_MISC, "esm at 420000", &dev);
> --
> 2.40.0
>


-- 
greets
--
Christian Gmeiner, MSc

https://christian-gmeiner.info/privacypolicy