[PATCH v2 01/13] drivers: pmic: TPS65941 add support for WD disable

Jerome Neanne jneanne at baylibre.com
Fri Apr 7 15:33:35 CEST 2023


This is not a proper WD driver because it's not planned to
support WD driver for PMIC in u-boot at any time.
The purpose is just WD disable.

Signed-off-by: Jerome Neanne <jneanne at baylibre.com>
---
 drivers/power/pmic/tps65941.c | 36 +++++++++++++++++++++++++++++++++++
 include/power/tps65941.h      | 25 ++++++++++++++++++++++--
 2 files changed, 59 insertions(+), 2 deletions(-)

diff --git a/drivers/power/pmic/tps65941.c b/drivers/power/pmic/tps65941.c
index 83d0f83c64..643ea6179c 100644
--- a/drivers/power/pmic/tps65941.c
+++ b/drivers/power/pmic/tps65941.c
@@ -47,6 +47,9 @@ static int tps65941_bind(struct udevice *dev)
 	ofnode regulators_node;
 	int children;
 
+	if (dev->driver_data == TPS65941_WD)
+		return 0;
+
 	regulators_node = dev_read_subnode(dev, "regulators");
 	if (!ofnode_valid(regulators_node)) {
 		debug("%s: %s regulators subnode not found!\n", __func__,
@@ -64,6 +67,36 @@ static int tps65941_bind(struct udevice *dev)
 	return dm_scan_fdt_dev(dev);
 }
 
+static int stop_watchdog(struct udevice *wd_i2c_dev)
+{
+	int ret;
+
+	ret = dm_i2c_reg_read(wd_i2c_dev, TPS65941_WD_MODE_REG);
+	if (ret < 0) {
+		debug("failed to write i2c reg (%d)\n", ret);
+		return 0;
+	}
+
+	ret &= ~TPS65941_WD_PWRHOLD_MASK;
+	ret |= TPS65941_WD_PWRHOLD_MASK;
+	ret = dm_i2c_reg_write(wd_i2c_dev, TPS65941_WD_MODE_REG, ret);
+	if (ret)
+		debug("%s: %s write WD disable fail!\n", __func__, wd_i2c_dev->name);
+	ret = dm_i2c_reg_read(wd_i2c_dev, TPS65941_WD_MODE_REG);
+	if (ret < 0) {
+		debug("failed to read back i2c reg (%d)\n", ret);
+		return 0;
+	}
+	return 0;
+}
+
+static int tps65941_probe(struct udevice *dev)
+{
+	if (dev->driver_data == TPS65941_WD)
+		return stop_watchdog(dev);
+	return 0;
+}
+
 static struct dm_pmic_ops tps65941_ops = {
 	.read = tps65941_read,
 	.write = tps65941_write,
@@ -73,7 +106,9 @@ static const struct udevice_id tps65941_ids[] = {
 	{ .compatible = "ti,tps659411", .data = TPS659411 },
 	{ .compatible = "ti,tps659412", .data = TPS659411 },
 	{ .compatible = "ti,tps659413", .data = TPS659413 },
+	{ .compatible = "ti,tps659312", .data = TPS659312 },
 	{ .compatible = "ti,lp876441",  .data =  LP876441 },
+	{ .compatible = "ti,tps65941_watchdog",  .data =  TPS65941_WD },
 	{ }
 };
 
@@ -82,5 +117,6 @@ U_BOOT_DRIVER(pmic_tps65941) = {
 	.id = UCLASS_PMIC,
 	.of_match = tps65941_ids,
 	.bind = tps65941_bind,
+	.probe = tps65941_probe,
 	.ops = &tps65941_ops,
 };
diff --git a/include/power/tps65941.h b/include/power/tps65941.h
index a2bc6814ba..70c7274355 100644
--- a/include/power/tps65941.h
+++ b/include/power/tps65941.h
@@ -2,7 +2,9 @@
 #define TPS659412		0x1
 #define TPS659413		0x2
 #define TPS659414		0x3
-#define  LP876441		0x4
+#define TPS659312		0x4
+#define LP876441		0x5
+#define TPS65941_WD		0x20
 
 /* I2C device address for pmic tps65941 */
 #define TPS65941_I2C_ADDR	(0x12 >> 1)
@@ -18,10 +20,29 @@
 #define TPS65941_BUCK_VOLT_MAX		3340000
 #define TPS65941_BUCK_MODE_MASK		0x1
 
-#define TPS65941_LDO_VOLT_MASK		0x3E
+#define TPS65941_LDO_VOLT_MASK		0x7F
 #define TPS65941_LDO_VOLT_MAX_HEX	0x3A
 #define TPS65941_LDO_VOLT_MIN_HEX	0x4
 #define TPS65941_LDO_VOLT_MAX		3300000
 #define TPS65941_LDO_MODE_MASK		0x1
 #define TPS65941_LDO_BYPASS_EN		0x80
 #define TP65941_BUCK_CONF_SLEW_MASK	0x7
+
+/* BYPASS is bit7 of VOUT TPS65941_LDO_BYP_MASK */
+#define TPS65941_LDO123_BYP_CONFIG       7
+
+#define TPS65941_LDO123_VOLT_BYP_MIN	1700000
+#define TPS65941_LDO123_VOLT_BYP_MAX	3600000
+#define TPS65941_LDO123_VOLT_MIN	600000
+#define TPS65941_LDO4_VOLT_MIN		1200000
+#define TPS65941_LDO4_VOLT_MIN		1200000
+#define TPS65941_LDO123_VSET_MIN	0x04
+#define TPS65941_LDO4_VSET_MIN		0x20
+#define TPS65941_LDO123_VSET_MAX	0x3A
+#define TPS65941_LDO4_VSET_MAX		0x74
+#define TPS65941_LDO123_STEP		50000
+#define TPS65941_LDO4_STEP		25000
+
+#define TPS65941_WD_MODE_REG		0x406
+#define TPS65941_WD_PWRHOLD_MASK	BIT(2)
+
-- 
2.34.1



More information about the U-Boot mailing list