[PATCH v4 3/5] arm: dts: Import device tree for Broadcom Northstar
Linus Walleij
linus.walleij at linaro.org
Fri Apr 7 15:40:06 CEST 2023
This brings in the main SoC device tree used by the
Broadcom Northstar chipset, i.e. BCM4709x and BCM5301x.
This is taken from the latest Linux kernel.
Cc: Rafał Miłecki <rafal at milecki.pl>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
ChangeLog v3->v4:
- No changes
ChangeLog v1->v3:
- Bundle with the iproc nand and algo select patches
---
arch/arm/dts/bcm5301x.dtsi | 581 ++++++++++++++++++++++++++++
include/dt-bindings/clock/bcm-nsp.h | 51 +++
2 files changed, 632 insertions(+)
create mode 100644 arch/arm/dts/bcm5301x.dtsi
create mode 100644 include/dt-bindings/clock/bcm-nsp.h
diff --git a/arch/arm/dts/bcm5301x.dtsi b/arch/arm/dts/bcm5301x.dtsi
new file mode 100644
index 000000000000..5fc1b847f4aa
--- /dev/null
+++ b/arch/arm/dts/bcm5301x.dtsi
@@ -0,0 +1,581 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
+ *
+ * Copyright 2013-2014 Hauke Mehrtens <hauke at hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <dt-bindings/clock/bcm-nsp.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+
+ chipcommon-a-bus at 18000000 {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x18000000 0x00001000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: serial at 300 {
+ compatible = "ns16550";
+ reg = <0x0300 0x100>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>;
+ status = "disabled";
+ };
+
+ uart1: serial at 400 {
+ compatible = "ns16550";
+ reg = <0x0400 0x100>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_uart1>;
+ status = "disabled";
+ };
+ };
+
+ mpcore-bus at 19000000 {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x19000000 0x00023000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ a9pll: arm_clk at 0 {
+ #clock-cells = <0>;
+ compatible = "brcm,nsp-armpll";
+ clocks = <&osc>;
+ reg = <0x00000 0x1000>;
+ };
+
+ scu at 20000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x20000 0x100>;
+ };
+
+ timer at 20200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x20200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&periph_clk>;
+ };
+
+ timer at 20600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x20600 0x20>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_EDGE_RISING)>;
+ clocks = <&periph_clk>;
+ };
+
+ watchdog at 20620 {
+ compatible = "arm,cortex-a9-twd-wdt";
+ reg = <0x20620 0x20>;
+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_EDGE_RISING)>;
+ clocks = <&periph_clk>;
+ };
+
+ gic: interrupt-controller at 21000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x21000 0x1000>,
+ <0x20100 0x100>;
+ };
+
+ L2: cache-controller at 22000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x22000 0x1000>;
+ cache-unified;
+ arm,shared-override;
+ prefetch-data = <1>;
+ prefetch-instr = <1>;
+ cache-level = <2>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts =
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ iprocmed: iprocmed {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ iprocslow: iprocslow {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ periph_clk: periph_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&a9pll>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+ };
+
+ axi at 18000000 {
+ compatible = "brcm,bus-axi";
+ reg = <0x18000000 0x1000>;
+ ranges = <0x00000000 0x18000000 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x000fffff 0xffff>;
+ interrupt-map =
+ /* ChipCommon */
+ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Switch Register Access Block */
+ <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* PCIe Controller 0 */
+ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* PCIe Controller 1 */
+ <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* PCIe Controller 2 */
+ <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* USB 2.0 Controller */
+ <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* USB 3.0 Controller */
+ <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 0 */
+ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 1 */
+ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 2 */
+ <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 3 */
+ <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* NAND Controller */
+ <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+
+ chipcommon: chipcommon at 0 {
+ reg = <0x00000000 0x1000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcie0: pcie at 12000 {
+ reg = <0x00012000 0x1000>;
+ };
+
+ pcie1: pcie at 13000 {
+ reg = <0x00013000 0x1000>;
+ };
+
+ pcie2: pcie at 14000 {
+ reg = <0x00014000 0x1000>;
+ };
+
+ usb2: usb2 at 21000 {
+ reg = <0x00021000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ interrupt-parent = <&gic>;
+
+ ehci: usb at 21000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-ehci";
+ reg = <0x00021000 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb2_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ehci_port1: port at 1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ ehci_port2: port at 2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+
+ ohci: usb at 22000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-ohci";
+ reg = <0x00022000 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ohci_port1: port at 1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ ohci_port2: port at 2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+ };
+
+ usb3: usb3 at 23000 {
+ reg = <0x00023000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ interrupt-parent = <&gic>;
+
+ xhci: usb at 23000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-xhci";
+ reg = <0x00023000 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_phy>;
+ phy-names = "usb";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ xhci_port1: port at 1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+ };
+ };
+
+ gmac0: ethernet at 24000 {
+ reg = <0x24000 0x800>;
+ };
+
+ gmac1: ethernet at 25000 {
+ reg = <0x25000 0x800>;
+ };
+
+ gmac2: ethernet at 26000 {
+ reg = <0x26000 0x800>;
+ };
+
+ gmac3: ethernet at 27000 {
+ reg = <0x27000 0x800>;
+ };
+ };
+
+ pwm: pwm at 18002000 {
+ compatible = "brcm,iproc-pwm";
+ reg = <0x18002000 0x28>;
+ clocks = <&osc>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ mdio: mdio at 18003000 {
+ compatible = "brcm,iproc-mdio";
+ reg = <0x18003000 0x8>;
+ #size-cells = <0>;
+ #address-cells = <1>;
+ };
+
+ mdio-mux at 18003000 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x18003000 0x4>;
+ mux-mask = <0x200>;
+
+ mdio at 0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3_phy: usb3-phy at 10 {
+ compatible = "brcm,ns-ax-usb3-phy";
+ reg = <0x10>;
+ usb3-dmp-syscon = <&usb3_dmp>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+ };
+
+ usb3_dmp: syscon at 18105000 {
+ reg = <0x18105000 0x1000>;
+ };
+
+ uart2: serial at 18008000 {
+ compatible = "ns16550a";
+ reg = <0x18008000 0x20>;
+ clocks = <&iprocslow>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ i2c0: i2c at 18009000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x18009000 0x50>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ dmu-bus at 1800c000 {
+ compatible = "simple-bus";
+ ranges = <0 0x1800c000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cru-bus at 100 {
+ compatible = "brcm,ns-cru", "simple-mfd";
+ reg = <0x100 0x1a4>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ lcpll0: clock-controller at 100 {
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-lcpll0";
+ reg = <0x100 0x14>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll0", "pcie_phy",
+ "sdio", "ddr_phy";
+ };
+
+ genpll: clock-controller at 140 {
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-genpll";
+ reg = <0x140 0x24>;
+ clocks = <&osc>;
+ clock-output-names = "genpll", "phy",
+ "ethernetclk",
+ "usbclk", "iprocfast",
+ "sata1", "sata2";
+ };
+
+ usb2_phy: phy at 164 {
+ compatible = "brcm,ns-usb2-phy";
+ reg = <0x164 0x4>;
+ brcm,syscon-clkset = <&cru_clkset>;
+ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+ clock-names = "phy-ref-clk";
+ #phy-cells = <0>;
+ };
+
+ cru_clkset: syscon at 180 {
+ compatible = "brcm,cru-clkset", "syscon";
+ reg = <0x180 0x4>;
+ };
+
+ pinctrl: pinctrl at 1c0 {
+ compatible = "brcm,bcm4708-pinmux";
+ reg = <0x1c0 0x24>;
+ reg-names = "cru_gpio_control";
+
+ spi-pins {
+ groups = "spi_grp";
+ function = "spi";
+ };
+
+ pinmux_i2c: i2c-pins {
+ groups = "i2c_grp";
+ function = "i2c";
+ };
+
+ pinmux_pwm: pwm-pins {
+ groups = "pwm0_grp", "pwm1_grp",
+ "pwm2_grp", "pwm3_grp";
+ function = "pwm";
+ };
+
+ pinmux_uart1: uart1-pins {
+ groups = "uart1_grp";
+ function = "uart1";
+ };
+ };
+
+ thermal: thermal at 2c0 {
+ compatible = "brcm,ns-thermal";
+ reg = <0x2c0 0x10>;
+ #thermal-sensor-cells = <0>;
+ };
+ };
+ };
+
+ srab: ethernet-switch at 18007000 {
+ compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
+ reg = <0x18007000 0x1000>;
+
+ status = "disabled";
+
+ /* ports are defined in board DTS */
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ rng: rng at 18004000 {
+ compatible = "brcm,bcm5301x-rng";
+ reg = <0x18004000 0x14>;
+ };
+
+ nand_controller: nand-controller at 18028000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
+ reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
+ reg-names = "nand", "iproc-idm", "iproc-ext";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcm,nand-has-wp;
+ };
+
+ spi at 18029200 {
+ compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+ reg = <0x18029200 0x184>,
+ <0x18029000 0x124>,
+ <0x1811b408 0x004>,
+ <0x180293a0 0x01c>;
+ reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mspi_done",
+ "mspi_halted",
+ "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "spi_lr_overread";
+ clocks = <&iprocmed>;
+ clock-names = "iprocmed";
+ num-cs = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ spi_nor: flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ status = "disabled";
+
+ partitions {
+ compatible = "brcm,bcm947xx-cfe-partitions";
+ };
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ coefficients = <(-556) 418000>;
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu-crit {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+ };
+};
diff --git a/include/dt-bindings/clock/bcm-nsp.h b/include/dt-bindings/clock/bcm-nsp.h
new file mode 100644
index 000000000000..ad5827cde782
--- /dev/null
+++ b/include/dt-bindings/clock/bcm-nsp.h
@@ -0,0 +1,51 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _CLOCK_BCM_NSP_H
+#define _CLOCK_BCM_NSP_H
+
+/* GENPLL clock channel ID */
+#define BCM_NSP_GENPLL 0
+#define BCM_NSP_GENPLL_PHY_CLK 1
+#define BCM_NSP_GENPLL_ENET_SW_CLK 2
+#define BCM_NSP_GENPLL_USB_PHY_REF_CLK 3
+#define BCM_NSP_GENPLL_IPROCFAST_CLK 4
+#define BCM_NSP_GENPLL_SATA1_CLK 5
+#define BCM_NSP_GENPLL_SATA2_CLK 6
+
+/* LCPLL0 clock channel ID */
+#define BCM_NSP_LCPLL0 0
+#define BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK 1
+#define BCM_NSP_LCPLL0_SDIO_CLK 2
+#define BCM_NSP_LCPLL0_DDR_PHY_CLK 3
+
+#endif /* _CLOCK_BCM_NSP_H */
--
2.39.2
More information about the U-Boot
mailing list