[PATCH v2 2/2] video: sunxi: dw-hdmi: Use DM for HVCC regulator

[Jernej Škrabec]

Dne sobota, 08. april 2023 ob 02:26:39 CEST je Andre Przywara napisal(a):
> From: Samuel Holland <samuel at sholland.org>
> 
> The HDMI PHY depends on the HVCC supply being enabled. So far we have
> relied on it being enabled by an earlier firmware stage (SPL or TF-A).
> Attempt to enable the regulator here, so we can remove that dependency.
> 
> Signed-off-by: Samuel Holland <samuel at sholland.org>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>

Reviewed-by: Jernej Skrabec <jernej.skrabec at gmail.com>

Best regards,
Jernej

> ---
>  drivers/video/sunxi/sunxi_dw_hdmi.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/video/sunxi/sunxi_dw_hdmi.c
> b/drivers/video/sunxi/sunxi_dw_hdmi.c index ef18d1f281f..0324a050d03 100644
> --- a/drivers/video/sunxi/sunxi_dw_hdmi.c
> +++ b/drivers/video/sunxi/sunxi_dw_hdmi.c
> @@ -19,11 +19,13 @@
>  #include <asm/arch/lcdc.h>
>  #include <linux/bitops.h>
>  #include <linux/delay.h>
> +#include <power/regulator.h>
> 
>  struct sunxi_dw_hdmi_priv {
>  	struct dw_hdmi hdmi;
>  	struct reset_ctl_bulk resets;
>  	struct clk_bulk clocks;
> +	struct udevice *hvcc;
>  };
> 
>  struct sunxi_hdmi_phy {
> @@ -333,6 +335,9 @@ static int sunxi_dw_hdmi_probe(struct udevice *dev)
>  		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
>  	int ret;
> 
> +	if (priv->hvcc)
> +		regulator_set_enable(priv->hvcc, true);
> +
>  	/* Set pll3 to 297 MHz */
>  	clock_set_pll3(297000000);
> 
> @@ -384,6 +389,10 @@ static int sunxi_dw_hdmi_of_to_plat(struct udevice
> *dev) if (ret)
>  		return ret;
> 
> +	ret = device_get_supply_regulator(dev, "hvcc-supply", &priv->hvcc);
> +	if (ret)
> +		priv->hvcc = NULL;
> +
>  	return 0;
>  }