[PATCH 0/8] Add ESM support for J721E and J7200

[Neha Malcom Francis]

Add support for ESM (Error Signalling Module) in J721E and J7200. The
ESM error pin output is routed to the PMIC (Power Management IC) which
can reset the board. The dts nodes for SoC and PMIC ESM modules are
added (if not already) to enable them.

Gowtham Tammana (6):
  arm: dts: k3-j7200: Add Main domain ESM support
  arm: dts: k3-j7200-r5-common: Add pmic node for esm
  arm: dts: k3-j7200: Add ESM PMIC support for tps659413
  j721e_init: initialize ESM support for J7200 SOM
  power: pmic: tps65491: Dont fail on master node
  configs: j7200_evm_r5_defconfig: Enable ESM modules

Tero Kristo (2):
  arm: mach-k3: j721e_init: initialize ESM support
  arm: dts: k3-k721e: Add Main domain ESM support

 .../k3-j7200-common-proc-board-u-boot.dtsi    |  4 +++
 arch/arm/dts/k3-j7200-main.dtsi               |  6 +++++
 .../k3-j7200-r5-common-proc-board-u-boot.dtsi | 11 ++++++++
 .../arm/dts/k3-j7200-r5-common-proc-board.dts | 13 +++++++---
 arch/arm/dts/k3-j7200.dtsi                    |  1 +
 arch/arm/dts/k3-j721e.dtsi                    |  1 +
 arch/arm/mach-k3/j721e_init.c                 | 25 ++++++++++++++++++-
 configs/j7200_evm_r5_defconfig                |  2 ++
 drivers/power/pmic/tps65941.c                 |  1 -
 9 files changed, 59 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/dts/k3-j7200-r5-common-proc-board-u-boot.dtsi

-- 
2.34.1