[PATCH v4 1/3] starfive: pci: Add StarFive JH7110 pcie driver

Bin Meng bmeng.cn at gmail.com
Tue Apr 11 07:20:58 CEST 2023


On Tue, Apr 11, 2023 at 11:53 AM Minda Chen <minda.chen at starfivetech.com> wrote:
>
>
>
> On 2023/4/11 10:55, Bin Meng wrote:
> > On Tue, Apr 11, 2023 at 9:03 AM Minda Chen <minda.chen at starfivetech.com> wrote:
> >>
> >> From: Mason Huo <mason.huo at starfivetech.com>
> >>
> >> Add pcie driver for StarFive JH7110, the driver depends on
> >> starfive gpio, pinctrl, clk and reset driver to do init.
> >>
> >> Several devices are tested:
> >> a) M.2 NVMe SSD
> >> b) Realtek 8169 Ethernet adapter.
> >>
> >> Signed-off-by: Mason Huo <mason.huo at starfivetech.com>
> >> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
> >> ---
> >>  drivers/pci/Kconfig                |   9 +
> >>  drivers/pci/Makefile               |   1 +
> >>  drivers/pci/pcie_starfive_jh7110.c | 465 +++++++++++++++++++++++++++++
> >>  3 files changed, 475 insertions(+)
> >>  create mode 100644 drivers/pci/pcie_starfive_jh7110.c
> >>
> >> diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
> >> index ef328d2652..f37b6baa25 100644
> >> --- a/drivers/pci/Kconfig
> >> +++ b/drivers/pci/Kconfig
> >> @@ -374,4 +374,13 @@ config PCIE_UNIPHIER
> >>           Say Y here if you want to enable PCIe controller support on
> >>           UniPhier SoCs.
> >>
> >> +config PCIE_STARFIVE_JH7110
> >> +       bool "Enable Starfive JH7110 PCIe driver"
> >> +       imply STARFIVE_JH7110
> >> +       imply CLK_JH7110
> >> +       imply RESET_JH7110
> >> +       help
> >> +         Say Y here if you want to enable PCIe controller support on
> >> +         StarFive JH7110 SoC.
> >> +
> >>  endif
> >> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
> >> index 49506e7ba5..bbe3323bb5 100644
> >> --- a/drivers/pci/Makefile
> >> +++ b/drivers/pci/Makefile
> >> @@ -49,3 +49,4 @@ obj-$(CONFIG_PCI_OCTEONTX) += pci_octeontx.o
> >>  obj-$(CONFIG_PCIE_OCTEON) += pcie_octeon.o
> >>  obj-$(CONFIG_PCIE_DW_SIFIVE) += pcie_dw_sifive.o
> >>  obj-$(CONFIG_PCIE_UNIPHIER) += pcie_uniphier.o
> >> +obj-$(CONFIG_PCIE_STARFIVE_JH7110) += pcie_starfive_jh7110.o
> >> diff --git a/drivers/pci/pcie_starfive_jh7110.c b/drivers/pci/pcie_starfive_jh7110.c
> >> new file mode 100644
> >> index 0000000000..130181013e
> >> --- /dev/null
> >> +++ b/drivers/pci/pcie_starfive_jh7110.c
> >> @@ -0,0 +1,465 @@
> >> +// SPDX-License-Identifier: GPL-2.0+
> >> +/*
> >> + * StarFive PLDA PCIe host controller driver
> >> + *
> >> + * Copyright (c) 2023 Starfive, Inc.
> >> + * Author: Mason Huo <mason.huo at starfivetech.com>
> >> + *
> >> + */
> >> +
> >> +#include <common.h>
> >> +#include <clk.h>
> >> +#include <dm.h>
> >> +#include <generic-phy.h>
> >> +#include <pci.h>
> >> +#include <pci_ids.h>
> >> +#include <power-domain.h>
> >> +#include <regmap.h>
> >> +#include <reset.h>
> >> +#include <syscon.h>
> >> +#include <asm/global_data.h>
> >> +#include <asm/io.h>
> >> +#include <asm-generic/gpio.h>
> >> +#include <dm/device_compat.h>
> >> +#include <dm/pinctrl.h>
> >> +#include <linux/delay.h>
> >> +#include <linux/iopoll.h>
> >> +#include <power/regulator.h>
> >> +
> >> +DECLARE_GLOBAL_DATA_PTR;
> >> +
> >> +#define GEN_SETTINGS                   0x80
> >> +#define PCIE_PCI_IDS                   0x9C
> >> +#define PCIE_WINROM                    0xFC
> >> +#define PMSG_SUPPORT_RX                        0x3F0
> >> +#define PCI_MISC                       0xB4
> >> +
> >> +#define PLDA_EP_ENABLE                 0
> >> +#define PLDA_RP_ENABLE                 1
> >> +
> >> +#define IDS_CLASS_CODE_SHIFT           8
> >> +
> >> +#define PREF_MEM_WIN_64_SUPPORT                BIT(3)
> >> +#define PMSG_LTR_SUPPORT               BIT(2)
> >> +#define PLDA_FUNCTION_DIS              BIT(15)
> >> +#define PLDA_FUNC_NUM                  4
> >> +#define PLDA_PHY_FUNC_SHIFT            9
> >> +
> >> +#define XR3PCI_ATR_AXI4_SLV0           0x800
> >> +#define XR3PCI_ATR_SRC_ADDR_LOW                0x0
> >> +#define XR3PCI_ATR_SRC_ADDR_HIGH       0x4
> >> +#define XR3PCI_ATR_TRSL_ADDR_LOW       0x8
> >> +#define XR3PCI_ATR_TRSL_ADDR_HIGH      0xc
> >> +#define XR3PCI_ATR_TRSL_PARAM          0x10
> >> +#define XR3PCI_ATR_TABLE_OFFSET                0x20
> >> +#define XR3PCI_ATR_MAX_TABLE_NUM       8
> >> +
> >> +#define XR3PCI_ATR_SRC_WIN_SIZE_SHIFT  1
> >> +#define XR3PCI_ATR_SRC_ADDR_MASK       GENMASK(31, 12)
> >> +#define XR3PCI_ATR_TRSL_ADDR_MASK      GENMASK(31, 12)
> >> +#define XR3_PCI_ECAM_SIZE              28
> >> +#define XR3PCI_ATR_TRSL_DIR            BIT(22)
> >> +/* IDs used in the XR3PCI_ATR_TRSL_PARAM */
> >> +#define XR3PCI_ATR_TRSLID_PCIE_MEMORY  0x0
> >> +#define XR3PCI_ATR_TRSLID_PCIE_CONFIG  0x1
> >> +
> >> +/* system control */
> >> +#define STG_SYSCON_K_RP_NEP_MASK               BIT(8)
> >> +#define STG_SYSCON_AXI4_SLVL_ARFUNC_MASK       GENMASK(22, 8)
> >> +#define STG_SYSCON_AXI4_SLVL_ARFUNC_SHIFT      8
> >> +#define STG_SYSCON_AXI4_SLVL_AWFUNC_MASK       GENMASK(14, 0)
> >> +#define STG_SYSCON_CLKREQ_MASK                 BIT(22)
> >> +#define STG_SYSCON_CKREF_SRC_SHIFT             18
> >> +#define STG_SYSCON_CKREF_SRC_MASK              GENMASK(19, 18)
> >> +
> >> +struct starfive_pcie {
> >> +       struct udevice *dev;
> >> +
> >> +       void __iomem *reg_base;
> >> +       void __iomem *cfg_base;
> >> +
> >> +       struct regmap *regmap;
> >> +       u32 stg_arfun;
> >> +       u32 stg_awfun;
> >> +       u32 stg_rp_nep;
> >> +
> >> +       struct clk_bulk clks;
> >> +       struct reset_ctl_bulk   rsts;
> >> +       struct gpio_desc        reset_gpio;
> >> +
> >> +       int atr_table_num;
> >> +       int sec_busno;
> >> +};
> >> +
> >> +static bool starfive_pcie_addr_valid(pci_dev_t bdf, struct starfive_pcie *priv)
> >> +{
> >> +       /*
> >> +        * Single device limitation.
> >> +        * For JH7110 SoC limitation, one bus can only connnect one device.
> >> +        * And PCIe controller contain HW issue that secondary bus of
> >> +        * host bridge emumerate duplicate devices.
> >> +        * Only can access device 0 in secondary bus.
> >> +        */
> >> +       if (PCI_BUS(bdf) == priv->sec_busno && PCI_DEV(bdf) > 0)
> >> +               return false;
> >> +
> >> +       return true;
> >> +}
> >> +
> >> +static int starfive_pcie_conf_address(const struct udevice *udev, pci_dev_t bdf,
> >> +                                     uint offset, void **paddr)
> >> +{
> >> +       struct starfive_pcie *priv = dev_get_priv(udev);
> >> +       int where = PCIE_ECAM_OFFSET(PCI_BUS(bdf), PCI_DEV(bdf),
> >> +                                    PCI_FUNC(bdf), offset);
> >> +
> >> +       if (!starfive_pcie_addr_valid(bdf, priv))
> >> +               return -ENODEV;
> >> +
> >> +       *paddr = (void *)(priv->cfg_base + where);
> >> +       return 0;
> >> +}
> >> +
> >> +static int starfive_pcie_config_read(const struct udevice *udev, pci_dev_t bdf,
> >> +                                    uint offset, ulong *valuep,
> >> +                                    enum pci_size_t size)
> >> +{
> >> +       return pci_generic_mmap_read_config(udev, starfive_pcie_conf_address,
> >> +                                           bdf, offset, valuep, size);
> >> +}
> >> +
> >> +int starfive_pcie_config_write(struct udevice *udev, pci_dev_t bdf,
> >> +                              uint offset, ulong value,
> >> +                              enum pci_size_t size)
> >> +{
> >> +       struct starfive_pcie *priv = dev_get_priv(udev);
> >> +       int ret;
> >> +
> >> +       ret = pci_generic_mmap_write_config(udev, starfive_pcie_conf_address,
> >> +                                           bdf, offset, value, size);
> >> +
> >> +       if (!ret && offset == PCI_SECONDARY_BUS) {
> >> +               priv->sec_busno = value & 0xff;
> >> +               debug("Secondary bus number was changed to %d\n",
> >> +                     priv->sec_busno);
> >> +       }
> >> +       return ret;
> >> +}
> >> +
> >> +static int starfive_pcie_set_atr_entry(struct starfive_pcie *priv, phys_addr_t src_addr,
> >> +                                      phys_addr_t trsl_addr, size_t window_size,
> >> +                                      int trsl_param)
> >> +{
> >> +       void __iomem *base =
> >> +               priv->reg_base + XR3PCI_ATR_AXI4_SLV0;
> >> +
> >> +       /* Support AXI4 Slave 0 Address Translation Tables 0-7. */
> >> +       if (priv->atr_table_num >= XR3PCI_ATR_MAX_TABLE_NUM) {
> >> +               dev_err(priv->dev, "ATR table number %d exceeds max num\n",
> >> +                       priv->atr_table_num);
> >> +               return -EINVAL;
> >> +       }
> >> +       base +=  XR3PCI_ATR_TABLE_OFFSET * priv->atr_table_num;
> >> +       priv->atr_table_num++;
> >> +
> >> +       /*
> >> +        * X3PCI_ATR_SRC_ADDR_LOW:
> >> +        *   - bit 0: enable entry,
> >> +        *   - bits 1-6: ATR window size: total size in bytes: 2^(ATR_WSIZE + 1)
> >> +        *   - bits 7-11: reserved
> >> +        *   - bits 12-31: start of source address
> >> +        */
> >> +       writel((lower_32_bits(src_addr) & XR3PCI_ATR_SRC_ADDR_MASK) |
> >> +                       (fls(window_size) - 1) << XR3PCI_ATR_SRC_WIN_SIZE_SHIFT | 1,
> >> +                       base + XR3PCI_ATR_SRC_ADDR_LOW);
> >> +       writel(upper_32_bits(src_addr), base + XR3PCI_ATR_SRC_ADDR_HIGH);
> >> +       writel((lower_32_bits(trsl_addr) & XR3PCI_ATR_TRSL_ADDR_MASK),
> >> +              base + XR3PCI_ATR_TRSL_ADDR_LOW);
> >> +       writel(upper_32_bits(trsl_addr), base + XR3PCI_ATR_TRSL_ADDR_HIGH);
> >> +       writel(trsl_param, base + XR3PCI_ATR_TRSL_PARAM);
> >> +
> >> +       dev_dbg(priv->dev, "ATR entry: 0x%010llx %s 0x%010llx [0x%010llx] (param: 0x%06x)\n",
> >> +               src_addr, (trsl_param & XR3PCI_ATR_TRSL_DIR) ? "<-" : "->",
> >> +               trsl_addr, (u64)window_size, trsl_param);
> >> +       return 0;
> >> +}
> >> +
> >> +static int starfive_pcie_atr_init(struct starfive_pcie *priv)
> >> +{
> >> +       struct udevice *ctlr = pci_get_controller(priv->dev);
> >> +       struct pci_controller *hose = dev_get_uclass_priv(ctlr);
> >> +       int i, ret;
> >> +
> >> +       /*
> >> +        * As the two host bridges in JH7110 soc have the same default
> >> +        * address translation table, this cause the second root port can't
> >> +        * access it's host bridge config space correctly.
> >> +        * To workaround, config the ATR of host bridge config space by SW.
> >> +        */
> >> +
> >> +       ret = starfive_pcie_set_atr_entry(priv,
> >> +                                         (phys_addr_t)priv->cfg_base,
> >> +                                         0,
> >> +                                         1 << XR3_PCI_ECAM_SIZE,
> >> +                                         XR3PCI_ATR_TRSLID_PCIE_CONFIG);
> >> +       if (ret)
> >> +               return ret;
> >> +
> >> +       for (i = 0; i < hose->region_count; i++) {
> >> +               if (hose->regions[i].flags == PCI_REGION_SYS_MEMORY)
> >> +                       continue;
> >> +
> >> +               /* Only support identity mappings. */
> >> +               if (hose->regions[i].bus_start !=
> >> +                   hose->regions[i].phys_start)
> >> +                       return -EINVAL;
> >> +
> >> +               ret = starfive_pcie_set_atr_entry(priv,
> >> +                                                 hose->regions[i].phys_start,
> >> +                                                 hose->regions[i].bus_start,
> >> +                                                 hose->regions[i].size,
> >> +                                                 XR3PCI_ATR_TRSLID_PCIE_MEMORY);
> >> +               if (ret)
> >> +                       return ret;
> >> +       }
> >> +
> >> +       return 0;
> >> +}
> >> +
> >> +static int starfive_pcie_get_syscon(struct udevice *dev)
> >> +{
> >> +       struct starfive_pcie *priv = dev_get_priv(dev);
> >> +       struct udevice *syscon;
> >> +       struct ofnode_phandle_args syscfg_phandle;
> >> +       u32 cells[4];
> >> +       int ret;
> >> +
> >> +       /* get corresponding syscon phandle */
> >> +       ret = dev_read_phandle_with_args(dev, "starfive,stg-syscon", NULL, 0, 0,
> >> +                                        &syscfg_phandle);
> >> +
> >> +       if (ret < 0) {
> >> +               dev_err(dev, "Can't get syscfg phandle: %d\n", ret);
> >> +               return ret;
> >> +       }
> >> +
> >> +       ret = uclass_get_device_by_ofnode(UCLASS_SYSCON, syscfg_phandle.node,
> >> +                                         &syscon);
> >> +       if (ret) {
> >> +               dev_err(dev, "Unable to find syscon device (%d)\n", ret);
> >> +               return ret;
> >> +       }
> >> +
> >> +       priv->regmap = syscon_get_regmap(syscon);
> >> +       if (!priv->regmap) {
> >> +               dev_err(dev, "Unable to find regmap\n");
> >> +               return -ENODEV;
> >> +       }
> >> +
> >> +       /* get syscon register offset */
> >> +       ret = dev_read_u32_array(dev, "starfive,stg-syscon",
> >> +                                cells, ARRAY_SIZE(cells));
> >> +       if (ret) {
> >> +               dev_err(dev, "Get syscon register err %d\n", ret);
> >> +               return -EINVAL;
> >> +       }
> >> +
> >> +       dev_dbg(dev, "Get syscon values: %x, %x, %x\n",
> >> +               cells[1], cells[2], cells[3]);
> >> +       priv->stg_arfun = cells[1];
> >> +       priv->stg_awfun = cells[2];
> >> +       priv->stg_rp_nep = cells[3];
> >> +
> >> +       return 0;
> >> +}
> >> +
> >> +static int starfive_pcie_parse_dt(struct udevice *dev)
> >> +{
> >> +       struct starfive_pcie *priv = dev_get_priv(dev);
> >> +       int ret;
> >> +
> >> +       priv->reg_base = (void *)dev_read_addr_name(dev, "reg");
> >> +       if (priv->reg_base == (void __iomem *)FDT_ADDR_T_NONE) {
> >> +               dev_err(dev, "Missing required reg address range\n");
> >> +               return -EINVAL;
> >> +       }
> >> +
> >> +       priv->cfg_base = (void *)dev_read_addr_name(dev, "config");
> >> +       if (priv->cfg_base == (void __iomem *)FDT_ADDR_T_NONE) {
> >> +               dev_err(dev, "Missing required config address range");
> >> +               return -EINVAL;
> >> +       }
> >> +
> >> +       ret = starfive_pcie_get_syscon(dev);
> >> +       if (ret) {
> >> +               dev_err(dev, "Can't get syscon: %d\n", ret);
> >> +               return ret;
> >> +       }
> >> +
> >> +       ret = reset_get_bulk(dev, &priv->rsts);
> >> +       if (ret) {
> >> +               dev_err(dev, "Can't get reset: %d\n", ret);
> >> +               return ret;
> >> +       }
> >> +
> >> +       ret = clk_get_bulk(dev, &priv->clks);
> >> +       if (ret) {
> >> +               dev_err(dev, "Can't get clock: %d\n", ret);
> >> +               return ret;
> >> +       }
> >> +
> >> +       ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset_gpio,
> >> +                                  GPIOD_IS_OUT);
> >> +       if (ret) {
> >> +               dev_err(dev, "Can't get reset-gpio: %d\n", ret);
> >> +               return ret;
> >> +       }
> >> +
> >> +       if (!dm_gpio_is_valid(&priv->reset_gpio)) {
> >> +               dev_err(dev, "reset-gpio is not valid\n");
> >> +               return -EINVAL;
> >> +       }
> >> +       return 0;
> >> +}
> >> +
> >> +static int starfive_pcie_init_port(struct udevice *dev)
> >> +{
> >> +       int ret, i;
> >> +       unsigned int value;
> >> +       struct starfive_pcie *priv = dev_get_priv(dev);
> >> +
> >> +       ret = clk_enable_bulk(&priv->clks);
> >> +       if (ret) {
> >> +               dev_err(dev, "Failed to enable clks (ret=%d)\n", ret);
> >> +               return ret;
> >> +       }
> >> +
> >> +       ret = reset_deassert_bulk(&priv->rsts);
> >> +       if (ret) {
> >> +               dev_err(dev, "Failed to deassert resets (ret=%d)\n", ret);
> >> +               goto err_deassert_clk;
> >> +       }
> >> +
> >> +       dm_gpio_set_value(&priv->reset_gpio, 1);
> >> +       /* Disable physical functions except #0 */
> >> +       for (i = 1; i < PLDA_FUNC_NUM; i++) {
> >> +               regmap_update_bits(priv->regmap,
> >> +                                  priv->stg_arfun,
> >> +                                  STG_SYSCON_AXI4_SLVL_ARFUNC_MASK,
> >> +                                  (i << PLDA_PHY_FUNC_SHIFT) <<
> >> +                                  STG_SYSCON_AXI4_SLVL_ARFUNC_SHIFT);
> >> +               regmap_update_bits(priv->regmap,
> >> +                                  priv->stg_awfun,
> >> +                                  STG_SYSCON_AXI4_SLVL_AWFUNC_MASK,
> >> +                                  i << PLDA_PHY_FUNC_SHIFT);
> >> +
> >> +               value = readl(priv->reg_base + PCI_MISC);
> >> +               value |= PLDA_FUNCTION_DIS;
> >> +               writel(value, priv->reg_base + PCI_MISC);
> >> +       }
> >> +
> >> +       /* Disable physical functions */
> >> +       regmap_update_bits(priv->regmap,
> >> +                          priv->stg_arfun,
> >> +                          STG_SYSCON_AXI4_SLVL_ARFUNC_MASK,
> >> +                          0);
> >> +       regmap_update_bits(priv->regmap,
> >> +                          priv->stg_awfun,
> >> +                          STG_SYSCON_AXI4_SLVL_AWFUNC_MASK,
> >> +                          0);
> >> +
> >> +       /* Enable root port */
> >> +       value = readl(priv->reg_base + GEN_SETTINGS);
> >> +       value |= PLDA_RP_ENABLE;
> >> +       writel(value, priv->reg_base + GEN_SETTINGS);
> >> +
> >> +       /* PCIe PCI Standard Configuration Identification Settings. */
> >> +       value = readl(priv->reg_base + PCIE_PCI_IDS);
> >> +       value &= 0xff;
> >> +       value |= (PCI_CLASS_BRIDGE_PCI_NORMAL << IDS_CLASS_CODE_SHIFT);
> >> +       writel(value, priv->reg_base + PCIE_PCI_IDS);
> >> +
> >> +       /*
> >> +        * The LTR message forwarding of PCIe Message Reception was set by core
> >> +        * as default, but the forward id & addr are also need to be reset.
> >> +        * If we do not disable LTR message forwarding here, or set a legal
> >> +        * forwarding address, the kernel will get stuck after this driver probe.
> >> +        * To workaround, disable the LTR message forwarding support on
> >> +        * PCIe Message Reception.
> >> +        */
> >> +       value = readl(priv->reg_base + PMSG_SUPPORT_RX);
> >> +       value &= ~PMSG_LTR_SUPPORT;
> >> +       writel(value, priv->reg_base + PMSG_SUPPORT_RX);
> >> +
> >> +       /* Prefetchable memory window 64-bit addressing support */
> >> +       value = readl(priv->reg_base + PCIE_WINROM);
> >> +       value |= PREF_MEM_WIN_64_SUPPORT;
> >> +       writel(value, priv->reg_base + PCIE_WINROM);
> >> +
> >> +       starfive_pcie_atr_init(priv);
> >> +
> >> +       dm_gpio_set_value(&priv->reset_gpio, 0);
> >> +       /* Ensure that PERST in default at least 300 ms */
> >> +       mdelay(300);
> >> +
> >> +       return 0;
> >> +
> >> +err_deassert_clk:
> >> +       clk_disable_bulk(&priv->clks);
> >> +       return ret;
> >> +}
> >> +
> >> +static int starfive_pcie_probe(struct udevice *dev)
> >> +{
> >> +       struct starfive_pcie *priv = dev_get_priv(dev);
> >> +       int ret;
> >> +
> >> +       priv->atr_table_num = 0;
> >> +       priv->dev = dev;
> >> +
> >> +       ret = starfive_pcie_parse_dt(dev);
> >> +       if (ret)
> >> +               return ret;
> >> +
> >> +       regmap_update_bits(priv->regmap,
> >> +                          priv->stg_rp_nep,
> >> +                          STG_SYSCON_K_RP_NEP_MASK,
> >> +                          STG_SYSCON_K_RP_NEP_MASK);
> >> +
> >> +       regmap_update_bits(priv->regmap,
> >> +                          priv->stg_awfun,
> >> +                          STG_SYSCON_CKREF_SRC_MASK,
> >> +                          2 << STG_SYSCON_CKREF_SRC_SHIFT);
> >> +
> >> +       regmap_update_bits(priv->regmap,
> >> +                          priv->stg_awfun,
> >> +                          STG_SYSCON_CLKREQ_MASK,
> >> +                          STG_SYSCON_CLKREQ_MASK);
> >> +
> >> +       ret = starfive_pcie_init_port(dev);
> >> +       if (ret)
> >> +               return ret;
> >> +
> >> +       dev_err(dev, "Starfive PCIe bus probed.\n");
> >> +
> >> +       return 0;
> >> +}
> >> +
> >> +static const struct dm_pci_ops starfive_pcie_ops = {
> >> +       .read_config    = starfive_pcie_config_read,
> >> +       .write_config   = starfive_pcie_config_write,
> >> +};
> >> +
> >> +static const struct udevice_id starfive_pcie_ids[] = {
> >> +       { .compatible = "starfive,jh7110-pcie" },
> >
> > My previous comments were not addressed.
> >
> I am sorry. I overlooked your previous comments.
> > Is this PCIe controller a StarFive IP? Or some 3rd party licensed IP?
> > Is this compatible string approved by the DT community?
> > The PCIe controller is 3rd party (PLDA) licensed IP.
> Both kernel and u-boot can not find PLDA IP compatible string.
> So this compatible string is not approved.
> I can split PCIe controller ops code to new pcie-plda-common.c like designeware codes.

Yes, please do. This will allow future SoCs that use the same PLDA
PCIe IP to reuse most of the codes.

In the meantime, I suggest you send patch to the Linux kernel for
adding the compatible string of the PLDA PCIe controller.

Is the datasheet public avaiable?

Regards,
Bin


More information about the U-Boot mailing list