[PATCH 12/18] arm: dts: fsl-ls1088a: sync usb controller nodes with Linux
Mathew McBride
matt at traverse.com.au
Wed Apr 12 09:38:24 CEST 2023
Synchronise the USB device tree definition with Linux, allowing
the U-Boot control FDT to be used to boot a Linux system with
working USB.
An extra compatible string, "fsl,layerscape-dwc3" is needed
for special handling in U-Boot, so has been added to the
-u-boot.dtsi file. It might be better to add this to the
Linux source bindings.
Signed-off-by: Mathew McBride <matt at traverse.com.au>
---
arch/arm/dts/fsl-ls1088a-u-boot.dtsi | 8 +++++++
arch/arm/dts/fsl-ls1088a.dtsi | 36 +++++++++++++++++-----------
2 files changed, 30 insertions(+), 14 deletions(-)
diff --git a/arch/arm/dts/fsl-ls1088a-u-boot.dtsi b/arch/arm/dts/fsl-ls1088a-u-boot.dtsi
index ac30b813ff..3a2291527c 100644
--- a/arch/arm/dts/fsl-ls1088a-u-boot.dtsi
+++ b/arch/arm/dts/fsl-ls1088a-u-boot.dtsi
@@ -29,3 +29,11 @@
status = "okay";
};
+&usb0 {
+ compatible = "fsl,layerscape-dwc3", "snps,dwc3";
+};
+
+&usb1 {
+ compatible = "fsl,layerscape-dwc3", "snps,dwc3";
+};
+
diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index bd344ba8e2..ca88b9e9f4 100644
--- a/arch/arm/dts/fsl-ls1088a.dtsi
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -256,6 +256,28 @@
status = "disabled";
};
+ usb0: usb at 3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ status = "disabled";
+ };
+
+ usb1: usb at 3110000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ status = "disabled";
+ };
+
pcie1: pcie at 3400000 {
compatible = "fsl,ls1088a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
@@ -490,20 +512,6 @@
interrupts = <0 21 0x4>; /* Level high type */
};
- usb0: usb3 at 3100000 {
- compatible = "fsl,layerscape-dwc3";
- reg = <0x0 0x3100000 0x0 0x10000>;
- interrupts = <0 80 0x4>; /* Level high type */
- dr_mode = "host";
- };
-
- usb1: usb3 at 3110000 {
- compatible = "fsl,layerscape-dwc3";
- reg = <0x0 0x3110000 0x0 0x10000>;
- interrupts = <0 81 0x4>; /* Level high type */
- dr_mode = "host";
- };
-
crypto: crypto at 8000000 {
compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
fsl,sec-era = <8>;
--
2.30.1
More information about the U-Boot
mailing list