[PATCH 10/18] arm: dts: fsl-ls1088a: move GPIO controller under "soc" per Linux

[Mathew McBride]

Move the GPIO controller definitions under the "soc" and in
the same relative position as the Linux kernel fsl-ls1088a.dtsi.

Signed-off-by: Mathew McBride <matt at traverse.com.au>
---
 arch/arm/dts/fsl-ls1088a.dtsi | 88 +++++++++++++++++------------------
 1 file changed, 44 insertions(+), 44 deletions(-)

diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index dc6241e20d..06237a58f4 100644
--- a/arch/arm/dts/fsl-ls1088a.dtsi
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -168,6 +168,50 @@
 			status = "disabled";
 		};
 
+		gpio0: gpio at 2300000 {
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio at 2310000 {
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio at 2320000 {
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio at 2330000 {
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
 		pcie1: pcie at 3400000 {
 			compatible = "fsl,ls1088a-pcie";
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
@@ -428,50 +472,6 @@
 		bus-width = <4>;
 	};
 
-	gpio0: gpio at 2300000 {
-		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
-		reg = <0x0 0x2300000 0x0 0x10000>;
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-		little-endian;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio1: gpio at 2310000 {
-		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
-		reg = <0x0 0x2310000 0x0 0x10000>;
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-		little-endian;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio2: gpio at 2320000 {
-		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
-		reg = <0x0 0x2320000 0x0 0x10000>;
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		little-endian;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio3: gpio at 2330000 {
-		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
-		reg = <0x0 0x2330000 0x0 0x10000>;
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		little-endian;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
 	ifc: ifc at 1530000 {
 		compatible = "fsl,ifc", "simple-bus";
 		reg = <0x0 0x2240000 0x0 0x20000>;
-- 
2.30.1