[PATCH 2/2] rockchip: handle peripheral as well as otg dr_mode

[John Keeping]

The OTG port is identified by inspecting the "dr_mode" property which is
expected to be "otg" for this port.  But it will work just as well as a
device controller when dr_mode is set to "peripheral", which may be
required if the mode detection pin is not set up correctly and the
device controller needs to be programmed to override this.

Signed-off-by: John Keeping <john at metanate.com>
---
 arch/arm/mach-rockchip/board.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-rockchip/board.c b/arch/arm/mach-rockchip/board.c
index 6d33d65780..45d9eae870 100644
--- a/arch/arm/mach-rockchip/board.c
+++ b/arch/arm/mach-rockchip/board.c
@@ -231,6 +231,7 @@ int board_usb_init(int index, enum usb_init_type init)
 	while (ofnode_valid(node)) {
 		switch (usb_get_dr_mode(node)) {
 		case USB_DR_MODE_OTG:
+		case USB_DR_MODE_PERIPHERAL:
 			matched = true;
 			break;
 
-- 
2.40.0