[PATCH v2 1/2] ARM: dts: rk3588-rock-5b-u-boot: add u-boot, dm-spl to pinctrl for sdmmc

Kever Yang kever.yang at rock-chips.com
Mon Apr 17 03:02:58 CEST 2023


On 2023/4/14 17:45, Eugen Hristev wrote:
> On 4/14/23 11:55, Kever Yang wrote:
>>
>> On 2023/3/18 00:29, Eugen Hristev wrote:
>>> To be able to initialize the pinctrl correctly at SPL level and read
>>> u-boot proper from SD-Card, the pinctrl must be initialized.
>>>
>>> Signed-off-by: Eugen Hristev <eugen.hristev at collabora.com>
>> Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
>>
>
> Hi Kever,
>
> The properties must be changed to bootph, I will update and send a new 
> version.

Yes, the u-boot,dm-spl has migrate to bootph.

Thanks,

- Kever

>
> Eugen
>
>> Thanks,
>> - Kever
>>> ---
>>> Changes in v2:
>>> - add u-boot,dm-spl to pull up nodes, to also setup the pull control
>>> correctly. Also, in the loop that initializes multiple pins, only the
>>> first will be muxed as the loop will break when the pull up node is not
>>> found.
>>>
>>>   arch/arm/dts/rk3588-rock-5b-u-boot.dtsi | 26 
>>> +++++++++++++++++++++++++
>>>   1 file changed, 26 insertions(+)
>>>
>>> diff --git a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi 
>>> b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
>>> index e1d240baf35d..a9d506ba6515 100644
>>> --- a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
>>> +++ b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
>>> @@ -124,6 +124,8 @@
>>>   };
>>>   &pinctrl {
>>> +    u-boot,dm-spl;
>>> +
>>>       usb {
>>>           vcc5v0_host_en: vcc5v0-host-en {
>>>               rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
>>> @@ -131,6 +133,30 @@
>>>       };
>>>   };
>>> +&pcfg_pull_up_drv_level_2 {
>>> +    u-boot,dm-spl;
>>> +};
>>> +
>>> +&pcfg_pull_up {
>>> +    u-boot,dm-spl;
>>> +};
>>> +
>>> +&sdmmc_bus4 {
>>> +    u-boot,dm-spl;
>>> +};
>>> +
>>> +&sdmmc_clk {
>>> +    u-boot,dm-spl;
>>> +};
>>> +
>>> +&sdmmc_cmd {
>>> +    u-boot,dm-spl;
>>> +};
>>> +
>>> +&sdmmc_det {
>>> +    u-boot,dm-spl;
>>> +};
>>> +
>>>   &usb_host0_ehci {
>>>       companion = <&usb_host0_ohci>;
>>>       phys = <&u2phy2_host>;
>


More information about the U-Boot mailing list