[PATCH v4 02/10] clk: renesas: prepare for non-RCAR clock drivers

[Ralph Siemsen]

Hi Marek,

On Mon, Apr 17, 2023 at 07:02:34PM +0200, Marek Vasut wrote:
>On 3/8/23 21:26, Ralph Siemsen wrote:
>>diff --git a/drivers/clk/renesas/Makefile 
>>b/drivers/clk/renesas/Makefile
>>index 8f82a7aa3e..a0d8c10bdb 100644
>>--- a/drivers/clk/renesas/Makefile
>>+++ b/drivers/clk/renesas/Makefile
>>@@ -1,6 +1,5 @@
>>-obj-$(CONFIG_CLK_RENESAS) += renesas-cpg-mssr.o
>>  obj-$(CONFIG_CLK_RCAR_CPG_LIB) += rcar-cpg-lib.o
>>-obj-$(CONFIG_CLK_RCAR_GEN2) += clk-rcar-gen2.o
>>+obj-$(CONFIG_CLK_RCAR_GEN2) += clk-rcar-gen2.o renesas-cpg-mssr.o
>
>Why not move the renesas-cpg-mssr.o into obj-$(CONFIG_CLK_RCAR_CPG_LIB) 
>line instead ? 

I think this would break the build for gen2 devices, because they make 
calls to CPG functions (eg. renesas_clk_endisable from clk-rcar-gen2.c), 
however Kconfig only selects CPG lib for gen3.

Perhaps we could change Kconfig to select CPG also for gen2. I can make 
this patch, but how to test that this does not introduce any new 
problems?  Might there be an autobuilder for R-Car somewhere?

>I suspect RZN1 is not using the CPG lib anyway ?

You are correct, RZN1 does not use the CPG lib.

Regards
Ralph