[PATCH v2 25/42] x86: Pass video settings from SPL to U-Boot proper
Simon Glass
sjg at chromium.org
Wed Apr 19 06:02:57 CEST 2023
When video is set up in SPL, U-Boot proper needs to use the correct
parameters so it can write to the display.
Put these in a bloblist so they are available to U-Boot proper.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
(no changes since v1)
drivers/pci/pci_rom.c | 78 +++++++++++++++++++++++++++++++------------
include/bloblist.h | 1 +
include/video.h | 24 +++++++++++++
3 files changed, 82 insertions(+), 21 deletions(-)
diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c
index 2d9a2a899ef7..ecb6da64c5c9 100644
--- a/drivers/pci/pci_rom.c
+++ b/drivers/pci/pci_rom.c
@@ -26,6 +26,7 @@
#include <common.h>
#include <bios_emul.h>
+#include <bloblist.h>
#include <bootstage.h>
#include <dm.h>
#include <errno.h>
@@ -34,6 +35,7 @@
#include <malloc.h>
#include <pci.h>
#include <pci_rom.h>
+#include <spl.h>
#include <vesa.h>
#include <video.h>
#include <acpi/acpi_s3.h>
@@ -420,34 +422,68 @@ int vesa_setup_video(struct udevice *dev, int (*int15_handler)(void))
printf("Not available (previous bootloader prevents it)\n");
return -EPERM;
}
- bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display");
- ret = dm_pci_run_vga_bios(dev, int15_handler, PCI_ROM_USE_NATIVE |
- PCI_ROM_ALLOW_FALLBACK);
- bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD);
- if (ret) {
- debug("failed to run video BIOS: %d\n", ret);
- return ret;
- }
- ret = vesa_setup_video_priv(&mode_info.vesa,
- mode_info.vesa.phys_base_ptr, uc_priv,
- plat);
- if (ret) {
- if (ret == -ENFILE) {
- /*
- * See video-uclass.c for how to set up reserved memory
- * in your video driver
- */
- log_err("CONFIG_VIDEO_COPY enabled but driver '%s' set up no reserved memory\n",
- dev->driver->name);
+ /* In U-Boot proper, collect the information added by SPL (see below) */
+ if (IS_ENABLED(CONFIG_SPL_VIDEO) && spl_phase() > PHASE_SPL &&
+ CONFIG_IS_ENABLED(BLOBLIST)) {
+ struct video_handoff *ho;
+
+ ho = bloblist_find(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho));
+ if (!ho)
+ return log_msg_ret("blf", -ENOENT);
+ plat->base = ho->fb;
+ plat->size = ho->size;
+ uc_priv->xsize = ho->xsize;
+ uc_priv->ysize = ho->ysize;
+ uc_priv->line_length = ho->line_length;
+ uc_priv->bpix = ho->bpix;
+ } else {
+ bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display");
+ ret = dm_pci_run_vga_bios(dev, int15_handler,
+ PCI_ROM_USE_NATIVE |
+ PCI_ROM_ALLOW_FALLBACK);
+ bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD);
+ if (ret) {
+ debug("failed to run video BIOS: %d\n", ret);
+ return ret;
}
- debug("No video mode configured\n");
- return ret;
+ ret = vesa_setup_video_priv(&mode_info.vesa,
+ mode_info.vesa.phys_base_ptr,
+ uc_priv, plat);
+ if (ret) {
+ if (ret == -ENFILE) {
+ /*
+ * See video-uclass.c for how to set up reserved
+ * memory in your video driver
+ */
+ log_err("CONFIG_VIDEO_COPY enabled but driver '%s' set up no reserved memory\n",
+ dev->driver->name);
+ }
+
+ debug("No video mode configured\n");
+ return ret;
+ }
}
printf("Video: %dx%dx%d\n", uc_priv->xsize, uc_priv->ysize,
mode_info.vesa.bits_per_pixel);
+ /* In SPL, store the information for use by U-Boot proper */
+ if (spl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(BLOBLIST)) {
+ struct video_handoff *ho;
+
+ ho = bloblist_add(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho), 0);
+ if (!ho)
+ return log_msg_ret("blc", -ENOMEM);
+
+ ho->fb = plat->base;
+ ho->size = plat->size;
+ ho->xsize = uc_priv->xsize;
+ ho->ysize = uc_priv->ysize;
+ ho->line_length = uc_priv->line_length;
+ ho->bpix = uc_priv->bpix;
+ }
+
return 0;
}
diff --git a/include/bloblist.h b/include/bloblist.h
index 2a2f1700eb09..7ea72c6bd46d 100644
--- a/include/bloblist.h
+++ b/include/bloblist.h
@@ -113,6 +113,7 @@ enum bloblist_tag_t {
BLOBLISTT_PROJECT_AREA = 0x8000,
BLOBLISTT_U_BOOT_SPL_HANDOFF = 0x8000, /* Hand-off info from SPL */
BLOBLISTT_VBE = 0x8001, /* VBE per-phase state */
+ BLOBLISTT_U_BOOT_VIDEO = 0x8002, /* Video information from SPL */
/*
* Vendor-specific tags are permitted here. Projects can be open source
diff --git a/include/video.h b/include/video.h
index 29c4f51efb08..18ed159b8d84 100644
--- a/include/video.h
+++ b/include/video.h
@@ -133,6 +133,30 @@ struct video_ops {
#define video_get_ops(dev) ((struct video_ops *)(dev)->driver->ops)
+/**
+ * struct video_handoff - video information passed from SPL
+ *
+ * This is used when video is set up by SPL, to provide the details to U-Boot
+ * proper.
+ *
+ * @fb: Base address of frame buffer, 0 if not yet known
+ * @size: Frame-buffer size, in bytes
+ * @xsize: Number of pixel columns (e.g. 1366)
+ * @ysize: Number of pixels rows (e.g.. 768)
+ * @line_length: Length of each frame buffer line, in bytes. This can be
+ * set by the driver, but if not, the uclass will set it after
+ * probing
+ * @bpix: Encoded bits per pixel (enum video_log2_bpp)
+ */
+struct video_handoff {
+ u64 fb;
+ u32 size;
+ ushort xsize;
+ ushort ysize;
+ u32 line_length;
+ u8 bpix;
+};
+
/** enum colour_idx - the 16 colors supported by consoles */
enum colour_idx {
VID_BLACK = 0,
--
2.40.0.634.g4ca3ef3211-goog
More information about the U-Boot
mailing list