[PATCH v1 4/6] video: panel: add Renesas R69328 MIPI DSI panel driver
Svyatoslav Ryhel
clamor95 at gmail.com
Wed Apr 19 21:16:28 CEST 2023
Driver adds support for panels with Renesas R69328 IC
Currently supported compatible is:
- jdi,dx12d100vm0eaa
Tested-by: Andreas Westman Dorcsak <hedmoo at yahoo.com> # LG P880 T30
Tested-by: Svyatoslav Ryhel <clamor95 at gmail.com> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <clamor95 at gmail.com>
---
drivers/video/Kconfig | 9 ++
drivers/video/Makefile | 1 +
drivers/video/renesas-r69328.c | 232 +++++++++++++++++++++++++++++++++
3 files changed, 242 insertions(+)
create mode 100644 drivers/video/renesas-r69328.c
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index bfd8c4f126..2218eab3dd 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -489,6 +489,15 @@ config VIDEO_LCD_RENESAS_R61307
IPS-LCD module with Renesas R69328 IC. The panel has a 1024x768
resolution and uses 24 bit RGB per pixel.
+config VIDEO_LCD_RENESAS_R69328
+ tristate "Renesas R69328 720x1280 DSI video mode panel"
+ depends on PANEL && BACKLIGHT
+ select VIDEO_MIPI_DSI
+ help
+ Say Y here if you want to enable support for JDI dx12d100vm0eaa
+ IPS-LCD module with Renesas R69328 IC. The panel has a 720x1280
+ resolution and uses 24 bit RGB per pixel.
+
config VIDEO_LCD_SSD2828
bool "SSD2828 bridge chip"
---help---
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 9ab5de8858..cddfc8fd33 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
obj-$(CONFIG_VIDEO_LCD_ORISETECH_OTM8009A) += orisetech_otm8009a.o
obj-$(CONFIG_VIDEO_LCD_RAYDIUM_RM68200) += raydium-rm68200.o
obj-$(CONFIG_VIDEO_LCD_RENESAS_R61307) += renesas-r61307.o
+obj-$(CONFIG_VIDEO_LCD_RENESAS_R69328) += renesas-r69328.o
obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o
obj-$(CONFIG_VIDEO_LCD_TDO_TL070WSH30) += tdo-tl070wsh30.o
obj-$(CONFIG_VIDEO_MCDE_SIMPLE) += mcde_simple.o
diff --git a/drivers/video/renesas-r69328.c b/drivers/video/renesas-r69328.c
new file mode 100644
index 0000000000..999bf54c57
--- /dev/null
+++ b/drivers/video/renesas-r69328.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Renesas R69328 panel driver
+ *
+ * Copyright (c) 2022 Svyatoslav Ryhel <clamor95 at gmail.com>
+ */
+
+#include <common.h>
+#include <backlight.h>
+#include <dm.h>
+#include <panel.h>
+#include <log.h>
+#include <misc.h>
+#include <mipi_display.h>
+#include <mipi_dsi.h>
+#include <asm/gpio.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <power/regulator.h>
+
+#define R69328_MACP 0xB0 /* Manufacturer Command Access Protect */
+
+#define R69328_GAMMA_SET_A 0xC8 /* Gamma Setting A */
+#define R69328_GAMMA_SET_B 0xC9 /* Gamma Setting B */
+#define R69328_GAMMA_SET_C 0xCA /* Gamma Setting C */
+
+#define R69328_POWER_SET 0xD1
+
+struct renesas_r69328_priv {
+ struct udevice *backlight;
+
+ struct gpio_desc enable_gpio;
+ struct gpio_desc reset_gpio;
+};
+
+static const u8 address_mode[] = {
+ MIPI_DCS_SET_ADDRESS_MODE
+};
+
+#define dsi_generic_write_seq(dsi, cmd, seq...) do { \
+ static const u8 b[] = { cmd, seq }; \
+ int ret; \
+ ret = mipi_dsi_dcs_write_buffer(dsi, b, ARRAY_SIZE(b)); \
+ if (ret < 0) \
+ return ret; \
+ } while (0)
+
+static struct display_timing default_timing = {
+ .pixelclock.typ = 68000000,
+ .hactive.typ = 720,
+ .hfront_porch.typ = 92,
+ .hback_porch.typ = 62,
+ .hsync_len.typ = 4,
+ .vactive.typ = 1280,
+ .vfront_porch.typ = 6,
+ .vback_porch.typ = 3,
+ .vsync_len.typ = 1,
+};
+
+static int renesas_r69328_enable_backlight(struct udevice *dev)
+{
+ struct renesas_r69328_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = dm_gpio_set_value(&priv->enable_gpio, 1);
+ if (ret) {
+ printf("%s: error changing enable-gpios (%d)\n", __func__, ret);
+ return ret;
+ }
+ mdelay(5);
+
+ ret = dm_gpio_set_value(&priv->reset_gpio, 0);
+ if (ret) {
+ printf("%s: error changing reset-gpios (%d)\n", __func__, ret);
+ return ret;
+ }
+ mdelay(5);
+
+ ret = dm_gpio_set_value(&priv->reset_gpio, 1);
+ if (ret) {
+ printf("%s: error changing reset-gpios (%d)\n", __func__, ret);
+ return ret;
+ }
+
+ mdelay(5);
+
+ return 0;
+}
+
+static int renesas_r69328_set_backlight(struct udevice *dev, int percent)
+{
+ struct renesas_r69328_priv *priv = dev_get_priv(dev);
+ struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
+ struct mipi_dsi_device *dsi = plat->device;
+ int ret;
+
+ mipi_dsi_dcs_write_buffer(dsi, address_mode,
+ sizeof(address_mode));
+
+ ret = mipi_dsi_dcs_set_pixel_format(dsi, MIPI_DCS_PIXEL_FMT_24BIT << 4);
+ if (ret < 0) {
+ printf("%s: failed to set pixel format: %d\n", __func__, ret);
+ return ret;
+ }
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0) {
+ printf("%s: failed to exit sleep mode: %d\n", __func__, ret);
+ return ret;
+ }
+
+ mdelay(100);
+
+ /* MACP Off */
+ dsi_generic_write_seq(dsi, R69328_MACP, 0x04);
+
+ dsi_generic_write_seq(dsi, R69328_POWER_SET, 0x14,
+ 0x1D, 0x21, 0x67, 0x11, 0x9A);
+
+ dsi_generic_write_seq(dsi, R69328_GAMMA_SET_A, 0x00,
+ 0x1A, 0x20, 0x28, 0x25, 0x24,
+ 0x26, 0x15, 0x13, 0x11, 0x18,
+ 0x1E, 0x1C, 0x00, 0x00, 0x1A,
+ 0x20, 0x28, 0x25, 0x24, 0x26,
+ 0x15, 0x13, 0x11, 0x18, 0x1E,
+ 0x1C, 0x00);
+ dsi_generic_write_seq(dsi, R69328_GAMMA_SET_B, 0x00,
+ 0x1A, 0x20, 0x28, 0x25, 0x24,
+ 0x26, 0x15, 0x13, 0x11, 0x18,
+ 0x1E, 0x1C, 0x00, 0x00, 0x1A,
+ 0x20, 0x28, 0x25, 0x24, 0x26,
+ 0x15, 0x13, 0x11, 0x18, 0x1E,
+ 0x1C, 0x00);
+ dsi_generic_write_seq(dsi, R69328_GAMMA_SET_C, 0x00,
+ 0x1A, 0x20, 0x28, 0x25, 0x24,
+ 0x26, 0x15, 0x13, 0x11, 0x18,
+ 0x1E, 0x1C, 0x00, 0x00, 0x1A,
+ 0x20, 0x28, 0x25, 0x24, 0x26,
+ 0x15, 0x13, 0x11, 0x18, 0x1E,
+ 0x1C, 0x00);
+
+ /* MACP On */
+ dsi_generic_write_seq(dsi, R69328_MACP, 0x03);
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret < 0) {
+ printf("%s: failed to set display on: %d\n", __func__, ret);
+ return ret;
+ }
+
+ mdelay(50);
+
+ ret = backlight_enable(priv->backlight);
+ if (ret)
+ return ret;
+
+ ret = backlight_set_brightness(priv->backlight, percent);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int renesas_r69328_timings(struct udevice *dev,
+ struct display_timing *timing)
+{
+ memcpy(timing, &default_timing, sizeof(*timing));
+ return 0;
+}
+
+static int renesas_r69328_of_to_plat(struct udevice *dev)
+{
+ struct renesas_r69328_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev,
+ "backlight", &priv->backlight);
+ if (ret) {
+ printf("%s: Cannot get backlight: ret = %d\n", __func__, ret);
+ return ret;
+ }
+
+ ret = gpio_request_by_name(dev, "enable-gpios", 0,
+ &priv->enable_gpio, GPIOD_IS_OUT);
+ if (ret) {
+ printf("%s: Could not decode enable-gpios (%d)\n", __func__, ret);
+ return ret;
+ }
+
+ ret = gpio_request_by_name(dev, "reset-gpios", 0,
+ &priv->reset_gpio, GPIOD_IS_OUT);
+ if (ret) {
+ printf("%s: Could not decode reser-gpios (%d)\n", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int renesas_r69328_probe(struct udevice *dev)
+{
+ struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
+
+ /* fill characteristics of DSI data link */
+ plat->lanes = 4;
+ plat->format = MIPI_DSI_FMT_RGB888;
+ plat->mode_flags = MIPI_DSI_MODE_VIDEO;
+
+ return 0;
+}
+
+static const struct panel_ops renesas_r69328_ops = {
+ .enable_backlight = renesas_r69328_enable_backlight,
+ .set_backlight = renesas_r69328_set_backlight,
+ .get_display_timing = renesas_r69328_timings,
+};
+
+static const struct udevice_id renesas_r69328_ids[] = {
+ { .compatible = "jdi,dx12d100vm0eaa" },
+ { }
+};
+
+U_BOOT_DRIVER(renesas_r69328) = {
+ .name = "renesas_r69328",
+ .id = UCLASS_PANEL,
+ .of_match = renesas_r69328_ids,
+ .ops = &renesas_r69328_ops,
+ .of_to_plat = renesas_r69328_of_to_plat,
+ .probe = renesas_r69328_probe,
+ .plat_auto = sizeof(struct mipi_dsi_panel_plat),
+ .priv_auto = sizeof(struct renesas_r69328_priv),
+};
--
2.37.2
More information about the U-Boot
mailing list