[PATCH v1 3/6] video: panel: add Renesas R61307 MIPI DSI panel driver

Svyatoslav Ryhel clamor95 at gmail.com
Wed Apr 19 21:16:27 CEST 2023


R61307 is liquid crystal driver for high-definition
amorphous silicon (a-Si) panels and is ideal for
tablets and smartphones.

Supported compatibles are:
- koe,tx13d100vm0eaa
- hitachi,tx13d100vm0eaa

Tested-by: Andreas Westman Dorcsak <hedmoo at yahoo.com> # LG P880 T30
Tested-by: Svyatoslav Ryhel <clamor95 at gmail.com> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <clamor95 at gmail.com>
---
 drivers/video/Kconfig          |   9 +
 drivers/video/Makefile         |   1 +
 drivers/video/renesas-r61307.c | 296 +++++++++++++++++++++++++++++++++
 3 files changed, 306 insertions(+)
 create mode 100644 drivers/video/renesas-r61307.c

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 1695d17c8d..bfd8c4f126 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -480,6 +480,15 @@ config VIDEO_LCD_RAYDIUM_RM68200
 	Say Y here if you want to enable support for Raydium RM68200
 	720x1280 DSI video mode panel.
 
+config VIDEO_LCD_RENESAS_R61307
+	tristate "Renesas R61307 DSI video mode panel"
+	depends on PANEL && BACKLIGHT
+	select VIDEO_MIPI_DSI
+	help
+	  Say Y here if you want to enable support for KOE tx13d100vm0eaa
+	  IPS-LCD module with Renesas R69328 IC. The panel has a 1024x768
+	  resolution and uses 24 bit RGB per pixel.
+
 config VIDEO_LCD_SSD2828
 	bool "SSD2828 bridge chip"
 	---help---
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 05fb063105..9ab5de8858 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_VIDEO_LCD_ANX9804) += anx9804.o
 obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
 obj-$(CONFIG_VIDEO_LCD_ORISETECH_OTM8009A) += orisetech_otm8009a.o
 obj-$(CONFIG_VIDEO_LCD_RAYDIUM_RM68200) += raydium-rm68200.o
+obj-$(CONFIG_VIDEO_LCD_RENESAS_R61307) += renesas-r61307.o
 obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o
 obj-$(CONFIG_VIDEO_LCD_TDO_TL070WSH30) += tdo-tl070wsh30.o
 obj-$(CONFIG_VIDEO_MCDE_SIMPLE) += mcde_simple.o
diff --git a/drivers/video/renesas-r61307.c b/drivers/video/renesas-r61307.c
new file mode 100644
index 0000000000..6af95f1107
--- /dev/null
+++ b/drivers/video/renesas-r61307.c
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Renesas R61307 panel driver
+ *
+ * Copyright (c) 2022 Svyatoslav Ryhel <clamor95 at gmail.com>
+ */
+
+#include <common.h>
+#include <backlight.h>
+#include <dm.h>
+#include <panel.h>
+#include <log.h>
+#include <misc.h>
+#include <mipi_display.h>
+#include <mipi_dsi.h>
+#include <asm/gpio.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <power/regulator.h>
+
+#define R61307_MACP		0xB0 /* Manufacturer CMD Protect */
+
+#define R61307_INVERSION	0xC1
+#define R61307_GAMMA_SET_A	0xC8 /* Gamma Setting A */
+#define R61307_GAMMA_SET_B	0xC9 /* Gamma Setting B */
+#define R61307_GAMMA_SET_C	0xCA /* Gamma Setting C */
+#define R61307_CONTRAST_SET	0xCC
+
+struct renesas_r61307_priv {
+	struct udevice *vcc;
+	struct udevice *iovcc;
+
+	struct udevice *backlight;
+
+	struct gpio_desc reset_gpio;
+
+	bool dig_cont_adj;
+	bool inversion;
+	u32 gamma;
+};
+
+static const u8 macp_on[] = {
+	R61307_MACP, 0x03
+};
+
+static const u8 macp_off[] = {
+	R61307_MACP, 0x04
+};
+
+static const u8 address_mode[] = {
+	MIPI_DCS_SET_ADDRESS_MODE
+};
+
+static const u8 contrast_setting[] = {
+	R61307_CONTRAST_SET,
+	0xDC, 0xB4, 0xFF
+};
+
+static const u8 column_inversion[] = {
+	R61307_INVERSION,
+	0x00, 0x50, 0x03, 0x22,
+	0x16, 0x06, 0x60, 0x11
+};
+
+static const u8 line_inversion[] = {
+	R61307_INVERSION,
+	0x00, 0x10, 0x03, 0x22,
+	0x16, 0x06, 0x60, 0x01
+};
+
+static const u8 gamma_setting[][25] = {
+	{},
+	{
+		R61307_GAMMA_SET_A,
+		0x00, 0x06, 0x0A, 0x0F,
+		0x14, 0x1F, 0x1F, 0x17,
+		0x12, 0x0C, 0x09, 0x06,
+		0x00, 0x06, 0x0A, 0x0F,
+		0x14, 0x1F, 0x1F, 0x17,
+		0x12, 0x0C, 0x09, 0x06
+	},
+	{
+		R61307_GAMMA_SET_A,
+		0x00, 0x05, 0x0B, 0x0F,
+		0x11, 0x1D, 0x20, 0x18,
+		0x18, 0x09, 0x07, 0x06,
+		0x00, 0x05, 0x0B, 0x0F,
+		0x11, 0x1D, 0x20, 0x18,
+		0x18, 0x09, 0x07, 0x06
+	},
+	{
+		R61307_GAMMA_SET_A,
+		0x0B, 0x0D, 0x10, 0x14,
+		0x13, 0x1D, 0x20, 0x18,
+		0x12, 0x09, 0x07, 0x06,
+		0x0A, 0x0C, 0x10, 0x14,
+		0x13, 0x1D, 0x20, 0x18,
+		0x12, 0x09, 0x07, 0x06
+	},
+};
+
+static struct display_timing default_timing = {
+	.pixelclock.typ		= 62000000,
+	.hactive.typ		= 768,
+	.hfront_porch.typ	= 116,
+	.hback_porch.typ	= 81,
+	.hsync_len.typ		= 5,
+	.vactive.typ		= 1024,
+	.vfront_porch.typ	= 24,
+	.vback_porch.typ	= 8,
+	.vsync_len.typ		= 2,
+};
+
+static int renesas_r61307_enable_backlight(struct udevice *dev)
+{
+	struct renesas_r61307_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	ret = regulator_set_enable_if_allowed(priv->vcc, 1);
+	if (ret) {
+		printf("%s: error enabling vcc-supply (%d)\n", __func__, ret);
+		return ret;
+	}
+	mdelay(5);
+
+	ret = regulator_set_enable_if_allowed(priv->iovcc, 1);
+	if (ret) {
+		printf("%s: error enabling iovcc-supply (%d)\n", __func__, ret);
+		return ret;
+	}
+
+	ret = dm_gpio_set_value(&priv->reset_gpio, 0);
+	if (ret) {
+		printf("%s: error changing reset-gpios (%d)\n", __func__, ret);
+		return ret;
+	}
+	mdelay(5);
+
+	ret = dm_gpio_set_value(&priv->reset_gpio, 1);
+	if (ret) {
+		printf("%s: error changing reset-gpios (%d)\n", __func__, ret);
+		return ret;
+	}
+
+	mdelay(5);
+
+	return 0;
+}
+
+static int renesas_r61307_set_backlight(struct udevice *dev, int percent)
+{
+	struct renesas_r61307_priv *priv = dev_get_priv(dev);
+	struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
+	struct mipi_dsi_device *dsi = plat->device;
+	int ret;
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		printf("%s: failed to exit sleep mode: %d\n", __func__, ret);
+		return ret;
+	}
+
+	mdelay(80);
+
+	mipi_dsi_dcs_write_buffer(dsi, address_mode,
+				  sizeof(address_mode));
+
+	mdelay(20);
+
+	ret = mipi_dsi_dcs_set_pixel_format(dsi, MIPI_DCS_PIXEL_FMT_24BIT << 4);
+	if (ret < 0) {
+		printf("%s: failed to set pixel format: %d\n", __func__, ret);
+		return ret;
+	}
+
+	/* MACP Off */
+	mipi_dsi_generic_write(dsi, macp_off, sizeof(macp_off));
+
+	if (priv->dig_cont_adj)
+		mipi_dsi_generic_write(dsi, contrast_setting,
+				       sizeof(contrast_setting));
+
+	if (priv->gamma)
+		mipi_dsi_generic_write(dsi, gamma_setting[priv->gamma],
+				       sizeof(gamma_setting[priv->gamma]));
+
+	if (priv->inversion)
+		mipi_dsi_generic_write(dsi, column_inversion,
+				       sizeof(column_inversion));
+	else
+		mipi_dsi_generic_write(dsi, line_inversion,
+				       sizeof(line_inversion));
+
+	/* MACP On */
+	mipi_dsi_generic_write(dsi, macp_on, sizeof(macp_on));
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		printf("%s: failed to set display on: %d\n", __func__, ret);
+		return ret;
+	}
+
+	mdelay(50);
+
+	ret = backlight_enable(priv->backlight);
+	if (ret)
+		return ret;
+
+	ret = backlight_set_brightness(priv->backlight, percent);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int renesas_r61307_timings(struct udevice *dev,
+				  struct display_timing *timing)
+{
+	memcpy(timing, &default_timing, sizeof(*timing));
+	return 0;
+}
+
+static int renesas_r61307_of_to_plat(struct udevice *dev)
+{
+	struct renesas_r61307_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev,
+					   "backlight", &priv->backlight);
+	if (ret) {
+		printf("%s: Cannot get backlight: ret = %d\n", __func__, ret);
+		return ret;
+	}
+
+	ret = uclass_get_device_by_phandle(UCLASS_REGULATOR, dev,
+					   "vcc-supply", &priv->vcc);
+	if (ret) {
+		printf("%s: Cannot get vcc-supply: ret = %d\n", __func__, ret);
+		return ret;
+	}
+
+	ret = uclass_get_device_by_phandle(UCLASS_REGULATOR, dev,
+					   "iovcc-supply", &priv->iovcc);
+	if (ret) {
+		printf("%s: Cannot get iovcc-supply: ret = %d\n", __func__, ret);
+		return ret;
+	}
+
+	ret = gpio_request_by_name(dev, "reset-gpios", 0,
+				   &priv->reset_gpio, GPIOD_IS_OUT);
+	if (ret) {
+		printf("%s: Could not decode reser-gpios (%d)\n", __func__, ret);
+		return ret;
+	}
+
+	priv->dig_cont_adj = dev_read_bool(dev, "renesas,contrast");
+	priv->inversion = dev_read_bool(dev, "renesas,inversion");
+	priv->gamma = dev_read_u32_default(dev, "renesas,gamma", 0);
+
+	return 0;
+}
+
+static int renesas_r61307_probe(struct udevice *dev)
+{
+	struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
+
+	/* fill characteristics of DSI data link */
+	plat->lanes = 4;
+	plat->format = MIPI_DSI_FMT_RGB888;
+	plat->mode_flags = MIPI_DSI_MODE_VIDEO;
+
+	return 0;
+}
+
+static const struct panel_ops renesas_r61307_ops = {
+	.enable_backlight	= renesas_r61307_enable_backlight,
+	.set_backlight		= renesas_r61307_set_backlight,
+	.get_display_timing	= renesas_r61307_timings,
+};
+
+static const struct udevice_id renesas_r61307_ids[] = {
+	{ .compatible = "koe,tx13d100vm0eaa" },
+	{ .compatible = "hitachi,tx13d100vm0eaa" },
+	{ }
+};
+
+U_BOOT_DRIVER(renesas_r61307) = {
+	.name		= "renesas_r61307",
+	.id		= UCLASS_PANEL,
+	.of_match	= renesas_r61307_ids,
+	.ops		= &renesas_r61307_ops,
+	.of_to_plat	= renesas_r61307_of_to_plat,
+	.probe		= renesas_r61307_probe,
+	.plat_auto	= sizeof(struct mipi_dsi_panel_plat),
+	.priv_auto	= sizeof(struct renesas_r61307_priv),
+};
-- 
2.37.2



More information about the U-Boot mailing list